ARES WING Heavy-Duty Counterbalance Monitor Arm

Instruction Manual

Model: GDT1004

Introduction

This manual provides instructions for installing and using the ARES WING Heavy-Duty Counterbalance Monitor Arm. Please read all instructions carefully before beginning installation.

Must Check Before Installation

VESA Compatibility Check

Ensure your monitor's VESA hole pattern (75x75mm or 100x100mm) matches the product specifications. If not, contact customer service.

Diagram showing VESA hole patterns: W (Width) and H (Height) with 75x75mm and 100x100mm dimensions.
Adapter Check (Ultrawide Monitor Installation Tips)

Check if your monitor comes with a VESA adapter. Some monitors include one. If no VESA holes are present, you may need to purchase an adapter separately.

Diagram showing a VESA adapter and a QR code linking to installation tips for ultrawide monitors.
Weight Capacity Check

Ensure your monitor's weight is within the stand arm's load capacity of 2~20kg (4.4~44lbs). If not, this product is not compatible with your monitor.
Tabletop Thickness Check

Clamp Installation: Suitable for desks with a thickness of 0.47"-1.78".

Grommet Installation: Suitable for desks with a thickness of 0.47"-1.97" and installation holes with a diameter of 0.39"-2.36" (10-60mm).

Note: If the desktop thickness exceeds 1.78" and grommet installation is not possible, contact customer service.
Installation Tools (Not Included)
- Phillips Screwdriver
- Electric Drill (optional)
- Drill Bit (optional) 3/8" (Ø10mm)

Important Safety Information

Attention: Please note: Do not adjust the spring tension until the monitor is securely mounted.

Please keep the following precautions in mind:

Ensure the total weight of your monitor, including accessories, is within the monitor arm's load capacity.
Compatible monitors can be found in the user manual or product listing page.
Begin adjustments only after confirming the monitor is firmly attached to the bracket.
It is recommended to have assistance from another person to prevent damage or injury.
Always follow the instructions during operation.

Warning: The bracket arm is currently under pressure. For your safety, do not adjust it before screen installation as it could spring back and cause injury.

Parts List

Please check the parts according to the list. Contact ARES WING if any items are missing or damaged.

A (x1) Upper Arm
B (x1) Lower Arm
C (x1) Base
D (x1) VESA Plate
E (x1) Clamp Plate
F (x1) Grommet Plate
G (x1) Cable Clip
H (x1) Shaft
I (x2) Shaft Sleeve
J (x1) Limit Ring
K (x1) M5x35 Bolt
L (x1) M8x75 Bolt
M (x1) M8x150 Bolt
N (x4) M4x12 Screw
O (x4) D5 Washer
P (x1) 4mm Allen Key
Q (x1) 6mm Allen Key

Installation Steps

1a. Clamp Installation

For desks with a thickness of 0.47"-1.78".

Diagram showing the clamp installation process.

1b. Grommet Installation

For desks with a thickness of 0.47"-1.97" and installation holes with a diameter of 0.39"-2.36" (10-60mm).

Note: If there is no grommet hole on the desk, you will need to drill one.

Diagram showing the grommet installation process, including drilling a hole if necessary.

2. Base Rotation Adjustment

Tighten the limiting screw (do not overtighten). The arm can rotate ±90° or 360°.

Diagram showing how to adjust the base rotation.

3. Arm Rotation Adjustment

Diagram showing arm rotation adjustment.

4. VESA Plate Angle Adjustment

Adjust the tightness of the screws to set the VESA plate angle. Do not completely loosen the screws. A slight sound during adjustment is normal.

Diagram showing VESA plate angle adjustment.

5. Spring Tension Adjustment

Diagram showing spring tension adjustment.

6. Spring Tension Adjustment (Continued)

Note: Please adjust the tightness of the screws to adjust the angle of the VESA Plate and do not completely loosen the screws! There may be a sound during the adjustment of the screw tightness, which is normal, please do not worry.

Diagram showing spring tension adjustment.

7. Attaching Monitor to VESA Plate

Diagram showing how to attach the monitor to the VESA plate.

8. Securing the Monitor

Diagram showing how to secure the monitor to the VESA plate using screws.

CAUTION: Do not overtighten.

9. Mounting the Monitor Arm

HEAVY! You may need assistance with this step.

Diagram showing the process of mounting the monitor arm with the monitor attached.

CAUTION: Do not release the monitor immediately after hanging and wait until you are sure it is stable in its position to prevent injury to personnel or equipment. If the arm rises or falls, refer to the next step for adjustment.

10. Arm Rises/Drops After Installation and Tension Adjustment

Arm Rises After Installation: If the arm rises, turn the adjustment screw in the '-' direction until it remains in a horizontal position.

Arm Drops After Installation: If the arm drops, turn the adjustment screw in the '+' direction until it remains in a horizontal position.

CAUTION: DO NOT overtighten the screws.

Diagrams illustrating tension adjustment for rising and dropping arms.

Scan the QR Code to watch the tension adjustment tutorial.

11. Monitor Tilt, Swivel, and Rotation Adjustment

Tilt (+50° to -20°): Adjust the tilt angle. If adjustment is difficult (e.g., screen sagging or stiff movement), tighten or loosen the indicated screw as needed.

Swivel (+90° to -90°): Adjust the swivel angle.

Screen Rotation (±180°): Adjust the screen rotation.

Note: If the display does not stop at your desired position, adjust the screw(s) using the tools as shown. To prevent the monitor from falling, do not loosen the screws more than half a turn.

CAUTION: Do not rotate the monitor past the rear edge of the desk to avoid an unstable situation that may cause tipping.

Scan the QR Code to watch the screen adjustment tutorial.

Frequently Asked Questions

Q1: What if I don't understand the instructions?

A1: Installation videos are available (QR code on the cover) for additional assistance. If you are still uncertain, please contact customer support.

Q2: What should I do if my monitor is not compatible with the VESA mount?

A2: Some products only support specific VESA sizes. If you cannot install the monitor, please consult customer service for assistance.

Q3: What should I do if the monitor arm has quality issues or is missing parts?

A3: For any missing or damaged parts, please contact ARES WING customer support with your order number, shipping address, and photos of the issue.

	Ares Wing Heavy-Duty Counterbalance Monitor Arm Installation Manual Comprehensive installation guide for the Ares Wing Heavy-Duty Counterbalance Monitor Arm, featuring USB-A/USB-C ports. This manual provides step-by-step instructions, safety precautions, and troubleshooting tips for setting up your monitor arm.
	Ares Wing Heavy-Duty Counterbalance Monitor Arm Installation Manual Comprehensive installation guide for the Ares Wing Heavy-Duty Counterbalance Monitor Arm with USB-A/USB-C Ports. Includes VESA compatibility checks, installation steps for clamp and grommet mounting, part lists, safety information, and troubleshooting tips.
	Ares Wing Heavy-Duty Counterbalance Monitor Arm Instruction Manual Comprehensive instruction manual for the Ares Wing Heavy-Duty Counterbalance Monitor Arm, model GDT1004P-2. Includes detailed steps for clamp and grommet installation, arm adjustment, and monitor mounting.
	Ares Wing Heavy-Duty Counterbalance Monitor Arm with USB-A/USB-C Ports - Instruction Manual This document provides detailed instructions for installing and using the Ares Wing Heavy-Duty Counterbalance Monitor Arm, including VESA compatibility checks, installation steps for clamp and grommet mounting, and safety precautions. It also includes a FAQ section.