SMART WIFI WIFI02-GF User Manual

Product Features

• Using APP to control and operate the unit.
• Using the gear switch to control and setting the time.

Product Images

The device is a white smart plug socket featuring a digital display. One view shows the front with the display reading "12:30". Another view shows the side profile, characterized by a ribbed texture and a circular dial or switch.

Operation

The WIFI02 is a single output Smart WIFI timer socket. Mobile software can be used to control the on/off and countdown functions of the socket via WIFI connection.

1. Network Configuration: Before initial use, configure the network to connect the product to the Internet via WIFI. This can be achieved using a router or a mobile phone's hotspot. Upon powering on, the display will flash "OFF". To initiate connection, long-press the red button for 3 seconds until the display shows "00.00" and stops flashing, indicating a successful connection. If network distribution is not required, the device can be set to "00.00" standby mode directly by pressing the red button or rotating the gear switch.

2. Red Button Modes: The red button has two modes: short press and long press.

   • Short Press: In standby mode, a short press turns the socket ON, providing continuous output. Pressing again stops the output.
   • Long Press: A long press enters the EZ distribution network status. When the display flashes "OFF", the device can be connected using the EZ configuration method. This action also exits any previously connected mobile phone signal.

3. Gear Switch: A gear switch is located around the product casing, offering two modes: clockwise and counterclockwise rotation.

   • Clockwise Rotation: In standby mode, rotating the switch clockwise by one grid increases the countdown timer by 15 minutes, displaying "00.15". Continuous clockwise rotation allows setting the timer up to a maximum of "24.00".
   • Counterclockwise Rotation: Conversely, rotating the switch counterclockwise by one grid reduces the countdown timer by 15 minutes. Continuous counterclockwise rotation can set the timer down to a minimum of "00.00".

Specifications

• Product Model: WIFI02
• Product Size: 67 × 67 × 84MM
• Color: WHITE
• Product Weight: 95g
• Input Voltage: 230Vac/50Hz
• Load Power: 16A Max. 3680W
• WIFI Parameters: Supports protocol 802.11 b/g/n; passageway 1-14@2.4GHz Support WPA/WPA2 security
• Power Consumption: < 0.5W
• System Supports: iOS 8.0 and above versions; Android 4.4 and above mobile phones

APP Step

To download the application, please refer to the provided instructions for scanning the necessary code.