Honeywell logo m1

ScanPal™ Series
ScanPal™ Series Mobile Computers

EDA52-1
EDA52-0           Quick Start Guide

EDA52-1 - Bar code

EDA52-EN-QS Rev A
Apr/06/2021

Out of the BOX

Siguruha nga ang imong kahon sa pagpadala adunay sulud nga kini nga mga butang:

  • ScanPal™ Mobile Computers (Model EDA52 -1 or EDA52 -0);
  • Main battery (3.8V, lithium ion battery);
  • 10-watt power adapter;
  • Replaceable adapter plugs;
  • USB charging cable;
  • Giya sa Dali nga Pagsugod.

Mga pulong:
If you ordered accessories for your mobile computer, verify that they are also included with the order.
Be sure to keep the original packaging in case you need to return the mobile computer for service.

Mubo nga sulat:
End users should not arbitrarily replace the operating system with other operating systems. To update operating system installed on your device, you need to get license from the OS vendors.

EDA52-1/EDA52-0 belongs to ScanPal™ Series

Front Panel

EDA52-1 - Front Panel 1

A Power Indicator
B Scan Status LED
C Paghikap sa Panel
D Atubangan nga camera
E Mikropono

Front Panel (without fingerprint identification module)

EDA52-1 - Front Panel 2

A Scan Engine
B Rear camera
C Latch sa Baterya
D Battery Cover Buckle Handle
E Cover Battery
F String Buckle
G Mamumulong

Front Panel (with fingerprint identification module)

EDA52-1 - Front Panel 3

A Scan Engine
B Rear camera
C Latch sa Baterya
D Battery Cover Buckle Handle
E Cover Battery
F String Buckle
G Fingerprint identification module
H Mamumulong

Wala nga Bahin View           Sa tuo nga bahin View

EDA52-1 - Left Side View                             EDA52-1 - Right Side View

EDA52-1 - Top Side View 1 (2-pin type)

EDA52-1 - Top Side View 2(6-pin type)

A Tomo +
B Tomo -
C Butang nga Scan
D Power Button
E Butang nga Scan
F 2 Pin Charging Contact
G USB
H 6 Pin Charging Contact

Install the Main Battery

Replace the battery with wrong models may cause explosion. Please make sure to use and dispose the battery in accordance with local regulations. Please recycle the battery when possible. Do not dispose it as household waste.
Please ensure all kits are dry when connect the mobile device or battery to external devices. Damages caused by connecting wet kits are not covered by the warranty.

ScanPal™ comes with a battery in a separate package.
Please follow the steps below to install the battery.

  1. Press down the battery cover safety button to move the battery cover safety lock to the unlock position at right;
  2. Open the battery cover with the battery cover buckle handle;
  3. Insert the battery (Insert the non-connector side first, then press the battery down to establish connection between the battery and the phone);
  4. Press down the battery cover (Insert the non-connector side first, then press the battery cover down)
  5. Press down the battery cover safety button to move the battery cover safety lock to the lock position at left

Mga pulong:
Refer to the illustrated installation steps on the following page.

(1)

EDA52-1 - Install the Main Battery 1

(2) (3)

EDA52-1 - Install the Main Battery 2  EDA52-1 - Install the Main Battery 3

(4)                                                      (5)

EDA52-1 - Install the Main Battery 4EDA52-1 - Install the Main Battery 5

Charging / Sync

Synchronous Communication

  1. Connect ScanPal™ to the PC using the USB charging cable

EDA52-1 - Charging 1

  1. USB charging cable

nagpabayad

  1. Open the USB cover at the bottom of ScanPal™;
  2. Connect ScanPal™ to the power adapter with USB charging cable;
  3. Make sure the replaceable adapter plug plugged into the power adapter;
  4. Connect the power adapter to the wall plug and start charging for ScanPal™.

Fully charge the ScanPal™ at least 4 hours (depending on the model) before using it for the first time.
Using the device while charging will significantly extend the time required to fully charge.

EDA52-1 - Charging 2

A Replaceable adapter plug
B Power adapter
C USB charging cable

Mga pulong:
It’s recommended to use Honeywell’s peripherals, batteries, USB charging cables and power adapters. Use of any non Honeywell peripherals, batteries, USB charging cables or power adapters may result in damage not covered by the warranty.

Mga Pasidaan:
Siguruha nga ang tanan nga mga sangkap uga sa wala pa ibutang ang baterya sa kompyuter. Ang mga basa nga sangkap sa pagmina mahimong hinungdan sa kadaot nga wala masakup sa warranty.

Suspend / Wakeup the Mobile Computer

Suspend / Wakeup the Mobile Computer

  1. Press the power button and then release (less than 2 seconds)
  2. To wake up the device from sleep mode, press the power button and then release (less than 2 seconds)

I-restart ang Mobile Computer
Press the reset button and then release to restart ScanPal™ to correct conditions where an application stops responding to the system or the computer seems to be locked up.

Power Indicator
The status of power indicators in non-charging and charging process are illustrated as below:

Non-charging process
off Battery power is normal
Nagdilaab nga kahel Ang kusog sa baterya gamay ra
Proseso sa pag-charge
Solid nga berde Nahingpit na ang pag-charge
Nag-flash green During charging process, and the charging is about to be completed
orange During charging process, and the battery power is still low
Nagdilaab pula Battery is abnormal
Pag-instalar og Nano SIM Card
  1. Power off;
  2. Press down the battery cover safety button to move the lock to the unlock position at right;
  3. Open the battery cover with the battery cover buckle handle;
  4. Pull out the battery (First open the battery connector side, then pull out the battery);
  5. Pull out card slot and insert the Nano SIM/TF card one by one, and push the card slot into place;
  6. Insert the battery;
  7. Press down the battery cover;
  8. Press down the battery latch and move it to the lock position at left;
  9. Kusog sa.

EDA52-1 - Install a Nano SIM Card 1     EDA52-1 - Install a Nano SIM Card 2

A Nano SIM card
B Micro SD card

Mubo nga sulat:

  1. Only EDA 52 1 delivers this feature
  2. It’s recommended to use standard Nano SIM card. Using non-standard Nano SIM card may cause the network unusable and even damage the card and slot;
  3. Using non-standard Nano SIM card may cause damage not covered by the warranty.
Use Scan Engine

Align the aiming beam with the barcodes, and adjust the angle between the beam and the barcodes to get the best results. The recommended range from the mobile computer to the barcodes is 7 to 30cm.

  1. Select Demos > Scan Demo;
  2. Touch Scan on the screen or press and hold any Scan button;
  3. Point the mobile computer at the bar code;
  4. Adjust the aiming beam: for optimum performance, avoid reflections by scanning the barcode at a slight angle. Scan the barcode to slowly move the aiming beam over the bar code;
  5. The information is obtained when the barcode is successfully decoded and the mobile computer beeps.

EDA52-1 - Use Scan Engine

A Scan Engine

Tumong sa Beam

The aiming beam gets narrower when the mobile computer gets closer to the barcodes, while it gets wider when the mobile computer gets farther from the barcodes.

The smaller the barcodes, the closer the aiming beams should get to the barcodes
The bigger the barcodes, the father the aiming beams should get to the barcodes

Beam positions when scan QR Code

EDA52-1 - Aiming Beam 1   EDA52-1 - Aiming Beam 2   EDA52-1 - Aiming Beam 3

Technical Support

For information about technical support, after-sales service and maintenance, please visit www.honeywellaidc.com.

dokumentasyon
The local version of this article is available at www.honeywellaidc.com.

patents
Para sa impormasyon sa patente, palihog tan-awa ang www.honeywellaidc.com/patents.

Limitado nga Garantiya
Alang sa kasayuran sa warranty, adto sa www.honeywellaidc.com/warranty_information.

Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII is not responsible for direct or indirect loss caused by any technical or editing errors or omissions contained in this article.

Ang kini nga dokumento adunay sulud nga kasayuran sa pagpanag-iya nga gipanalipdan sa copyright. Ang tanan nga mga katungod gigahin. Wala’y bahin sa kini nga dokumento ang mahimong kopyahon, kopyahin, o hubaron sa lain nga sinultian nga wala pa gisulat nga pagtugot sa HII.

Copyright © 2021 Honeywell International Inc. Tanan nga mga katungod gigahin.
Website: www.honeywellaidc.com

 

Honeywell logo m1

ScanPal EDA52 Handheld Computer

EDA52-ML-RS-01 (a prelim 2)

EDA52-1 - Bar Code 2
Agency Models: EDA52-0, EDA52-1

Publicly downloadable certificates are available at www.honeywellaidc.com/compliance.

Ang dokumentasyon sa produkto magamit sa www.honeywellaidc.com.

beko BLSA210M2S - Pasidaan 1 Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell International Inc. may void the authorization to operate this equipment.

For body worn operation, this device has been tested and meets the limits regarding human exposure to electromagnetic radiation set forth in related FCC, IC and CE rules.

beko BLSA210M2S - Pasidaan 1 802.11 Caution: A Wireless Network Administrator should review the operating restrictions and use with a properly configured access point.

FCCModels: EDA52-0, EDA52-1
FCC Bahin 15 Subpart B Klase B

Ang kini nga aparato nagsunod sa Bahin 15 sa Mga Panudlo sa FCC. Ang operasyon gipailalom sa mosunud nga duha nga mga kondisyon:
1. Kini nga aparato mahimong dili hinungdan sa makadaot nga pagpanghilabot.
2. Kinahanglan nga dawaton sa kini nga aparato ang bisan unsang nadawat nga pagpanghilabot, lakip ang pagpanghilabut nga mahimong hinungdan sa dili gusto nga operasyon.
Ang ekipo nga kini gisulayan ug nakit-an nga nagsunod sa mga limitasyon alang sa usa ka digital nga aparato sa Class B subay sa Bahin 15 sa Mga Panudlo sa FCC. Ang kini nga mga limitasyon gilaraw aron mahatagan makatarunganon nga proteksyon batok sa makadaot nga pagpanghilabot sa usa ka instalar sa puy-anan. Ang kini nga ekipo makamugna, mogamit, ug makapadan-ag enerhiya sa frequency sa radyo ug, kung dili ma-install ug magamit pinauyon sa mga panudlo, mahimong hinungdan sa makadaot nga pagpanghilabot sa mga komunikasyon sa radyo. Bisan pa, wala’y garantiya nga ang pagpanghilabot dili mahinabo sa usa ka piho nga pag-instalar. Kung ang kini nga kagamitan hinungdan sa makadaot nga pagpanghilabot sa pagdawat sa radyo o telebisyon, nga mahimo’g matino pinaagi sa pag-on ug pag-on sa kagamitan, giawhag ang mogamit nga sulayan nga itul-id ang pagpanghilabot sa usa o daghan pa sa mga mosunud nga lakang:
• Pag-usab o pagbalhin sa makadawat antena.
• Pagdugang sa pagkabulag taliwala sa kagamitan ug tigdawat.
• Ikonektar ang kagamitan sa usa ka outlet sa usa ka sirkito nga lahi sa koneksyon sa tigdawat.
• Pakigsulti sa negosyante o usa ka batid nga teknisyan sa radyo o telebisyon alang sa tabang.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell International Inc. is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell International Inc. The correction is the responsibility of the user.

Paggamit ra mga taming nga kable sa datos sa kini nga sistema.

Models: EDA52-0, EDA52-1
Pagsunod sa Canada

Ningsunud kini nga aparato sa (mga) sukaranan sa RSS nga wala’y lisensya sa Industry Canada. Ang operasyon gipailalom sa mosunud nga duha nga mga kondisyon:
1. Kini nga aparato mahimong dili hinungdan sa makadaot nga pagpanghilabot.
2. Kinahanglan nga dawaton sa kini nga aparato ang bisan unsang nadawat nga pagpanghilabot, lakip ang pagpanghilabut nga mahimong hinungdan sa dili gusto nga operasyon.
CAN ICES-3 (B) / NMB-3 (B)

Models: EDA52-0, EDA52-1
802.11a Radio Precaution Statements (North America)

  • 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 36 – 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations.
  • The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the EIRP limit.
  • The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall comply with the EIRP limits specified for point-to-point and non-point-to-point operation as appropriate.
  • Be advised that high-power radars are allocated as primary users (i.e., priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Ang kini nga aparato ug ang (mga) antena niini kinahanglan dili kauban nga lokasyon o pagpadagan kauban ang bisan unsang uban pang antena o transmitter, gawas ang mga nasulayan nga built-in nga radyo.

The County Code Selection feature is disabled for products marketed in the US/Canada.

CEHoneywell International Inc. hereby declares that the radio equipment types, non-specific SRD (Models: EDA52-0, EDA52-1) and cellular (Model: EDA52-1), are in compliance with the following directives:
• 2014/53/EU Radio Equipment
• 2011/65/EU RoHS (Recast)
Ang bug-os nga teksto sa deklarasyon sa pagsunod sa EU nga magamit sa mosunud nga adres sa internet:
www.honeywellaidc.com/compliance.
European contact:
Honeywell Productivity Solutions BV
Lagelandseweg 70
6545CG Nijmegen
Ang Netherlands

United Kingdom Contact: United Kingdom Honeywell Scanning and Mobility, Honeywell House, Skimped Hill Lane, Bracknell, Berkshire, RG12 1EB Phone: +44 (0)1344921052

The equipment is intended for use throughout the European Community.

Operating Frequency Ranges

Model: EDA52-1

  • 13-14 MHz (NFC): -19.45 dBµA/m @10 m EIRP
  • 2400-2483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP
  • 2400-2483.5 MHz (Bluetooth Low Energy): 6.79 dBm EIRP
  • 2400-2483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP
  • 5150-5350 MHz, 5470-5725 MHz and 5725-5875 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm, 17.82 dBm, and 13.91 dBm (5G B4) EIRP
  • 1710-1785 / 1805-1880 MHz (LTE Band 3, Tx/Rx): 23.21 dBm
  • 2500-2570 / 2620-2690 MHz (LTE Band 7, Tx/Rx): 22.33 dBm
  • 832-862 / 791-821 MHz (LTE Band 20, Tx/Rx): 24.27 dBm
  • 1920-1980 / 2110-2170 MHz (LTE Band 1,Tx/Rx): 22.73 dBm
  • 880-915 / 925-960 MHz (LTE Band 8, Tx/Rx): 22.15 dBm
  • 703-748 / 758-803 MHz (LTE Band 28, Tx/Rx): 23.85 dBm
  • 2570-2620 MHz (LTE Band 38): 22.92 dBm
  • 2300-2400MHz (LTE Band 40): 22.64 dBm
  • 880-915 / 925-960 MHz (UMTS 900 Band, Tx/Rx): 23.90 dBm
  • 1920-1980 / 2110-2170 MHz (UMTS 2100 Band, Tx/Rx): 24.99 dBm
  • 880-915 / 925-960 MHz (GSM/EGPRS GSM 900 Band, Tx/Rx): 33.71 dBm
  • 1710-1785 / 1805-1880 MHz (GSM/EGPRS DCS 1800 Band, Tx/Rx): 30.89 dBm
Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 3 Band A: 2400-2483.5 MHz):
AZ No license needed if used indoor and power not exceeding 30 mW.
IT The public use is subject to general authorization by the respective service provider.
RU SRD with FHSS modulation
• Maximum 2.5 mW EIRP.
• Maximum 100 mW EIRP. Permitted for use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposes for outdoor applications only when the installation height is not exceeding 10 m above the ground surface.
• Maximum 100 mW EIRP. Indoor applications
SRD with DSSS and other than FHSS wideband modulation
• Maximum mean EIRP density is 2 mW/MHz. Maximum 100 mW EIRP.
• Maximum mean EIRP density is 20 mW/MHz. Maximum 100 mW EIRP. It is permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems.
• Maximum mean EIRP density is 10 mW/MHz. Maximum 100 mW EIRP. Indoor applications
UA EIRP =100 mW with built-in antenna with amplification factor up to 6 dBi

Models: EDA52-0

  • 13-14 MHz (NFC): -19.56 dBµA/m @10 m EIRP
  • 2400-2483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP
  • 2400-2483.5 MHz (Bluetooth Low Energy): 6.79 dBm EIRP
  • 2400-2483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP
  • 5150-5350 MHz, 5470-5725 MHz and 5725-5875 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm, 17.82 dBm, and 13.91 dBm (5G B4) EIRP

802.11a/b/g/n/ac, Bluetooth and NFC
European Community Restrictions: 5150-5350 MHz is for indoor use only.

Mga Pahibalo sa Kaluwasan AT BE BG HR CY CZ DK EE FI FR DE GR
HU IS IE IT LV LI LT LU MT NL Dili PL
PT RO SK SI ES SE CH RU RS TR UK UK (NI)

 

Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 13 Band E1: 5150-5350 MHz, Band E2: 5470-5725 MHz):
AZ No license needed if used indoor and power not exceeding 30 mW

 

Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 9 Band J2: 13553-13567 kHz):
AZ Not implemented or no information.
BY Not implemented.
GE Not implemented.
RU Maximum magnetic field strength is +42 dBµA/m at 10 m.
UA The maximal strength of magnetic field on the distance of 10 m from a construction where the radiator is placed is 42 dBµA/m.

Product Environmental Information
Tan-aw ngadto www.honeywellaidc.com/en environmental alang sa impormasyon sa RoHS / REACH / WEEE.

Models: EDA52-0, EDA52-1
USA, Canada NRTL Safety

cTUVus listed: UL60950-1 2nd Edition, CSA C22.2 No. 60950-1-07 2nd Edition and UL62368-1 2nd Edition, CSA C22.2 No. 62368-1-14 2nd Edition.

EDA52-1 - WarningPasidaan! Aron mapugngan ang posibleng kadaot sa pandungog, ayaw pagpamati sa taas nga lebel sa kadaghan sa dugay nga panahon.

Mga Microwaves
The radio in the ScanPal EDA52 RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function.

Kaluwas sa LED
LEDs have been tested and classified as “RISK GROUP 1 (Low Risk)” to the Standard: IEC 62471:2006.

Laser Compliance and Precaution
This device has been tested in accordance with and complies with IEC60825-1:2014, 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 08, 2019. EDA52 devices that include a laser caution label (see far right) affixed to housing are a CLASS 2 LASER PRODUCT. This product has a maximum output of 1 mW at 630-680 nm.

beko BLSA210M2S - Pasidaan 1Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

EDA52-1 - CautionPasidaan CLASER RADIATION DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT. MAX. 1mW. 630-680nm. Pulse duration of 16.8mSec. IEC 60825-1:2014Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3.,as described in Laser Notice No. 56, dated May 8, 2019.

EDA52-1 - Caution

Max: 1mW, 630-680 nm
GB 7247.1-2012

beko BLSA210M2S - Pasidaan 1CAUTION: Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or other hazard. Dispose of batteries according to local regulations.

Impormasyon sa Pagkaladlad sa RF (SAR)

This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government and Canadian Government.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the government FCC/IC is 1.6 W/kg and for Europe 2 W/Kg. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Model EDA52-0

FCC SAR
The highest reported FCC SAR values for head and body-worn accessory use conditions are: 0.27 W/kg (1g) and 0.67 W/kg (1g).

IC SAR
The highest reported IC SAR values for head and body-worn accessory use conditions are: 0.27 W/kg (1g) and 0.67 W/kg (1g).

Gihatagan sa FCC ang usa ka Pagtugot sa Gamit alang sa kini nga modelo sa telepono nga adunay tanan nga gitaho nga lebel sa SAR nga gisusi sama sa pagsunod sa mga panudlo sa pagkaladlad sa FCC RF. Ang kasayuran sa SAR sa kini nga modelo sa telepono naa file uban ang FCC ug makit-an sa ilalum sa seksyon sa Display Grant sa www.fcc.gov/oet/ea/fccid after searching on FCC ID/IC ID:
HD5-EDA520/1693B-EDA520

Model EDA52-0

CE SAR
The highest reported CE SAR value for head and body-worn accessory use conditions are: 0.13 W/kg (10 g) and 0.20 W/kg (1g).

Model EDA52-1

CE SAR
The highest reported CE SAR The highest reported FCC SAR values for head, body-worn accessory and simultaneous transmission use conditions are: 0.31 W/kg (1g), 1.63 W/kg (1g), and 1.77 W/kg (1g).

For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 5mm to the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.

beko BLSA210M2S - Pasidaan 1Caution: If a body worn accessory is not purchased from Honeywell, the accessory must contain no metal and provide a 1.5 cm (0.6 in) space between the device and the body. Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment.

Hearing Aid Compatibility (HAC) Consumer Information

a)  This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. In the battery well of this equipment is a label that contains, among other information, a product identifier in the format US: HD5IPNANEDA52-0. If requested, this number must be provided to the telephone company.
b)  The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
c)  Should you experience trouble with this equipment, please contact Honeywell International Inc, 13509 South Point Blvd, Ste.100, Charlotte, NC 28273, Tel: 800-782-4263 for repair or warranty information. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
d)  Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified.
e)  This equipment is hearing aid compatible.

(Models) : EDA52-0, EDA52-1
(Names and Content of Hazardous Substances in the Product)
(Parts Name) (Hazardous Substance)
(Pb) (Hg) (Cd) (Cr6 +) (PBB) (PBDE)
(Mga bahin sa metal) x o o o o o
(Circuit module) x o o o o o
(Cable assembly) o o o o o o
(Plastic and polymer parts) o o o o o o
(Optical components) o o o o o o
(Baterya) x o o o o o
(The table is created in accordance to SJ/T 11364.)
o: (Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in China’s GB/T 26572.)
x: (Indicates that this hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement in China’s GB/T 26572.)

patents
Alang sa kasayuran sa patente, tan-awa ang www.hsmpats.com.

Alang sa kasayuran sa warranty, adto sa www.honeywellaidc.com ug i-klik ang Mga Kapanguhaan> Garantiya sa Produkto.

This document was prepared and executed in the English language. In the event this document is translated into another language and a conflict arises between the English version and a non-English version, the English version shall prevail, it being recognized and acknowledged that the English language version most clearly expresses the intent of the parties. Any notice or communication given in connection with this document must include a version in the English language.

Ang Honeywell International Inc.
9680 Daan nga Bailes Road
Fort Mill, SC 29707 USA

© 2021 Honeywell International Inc. Tanan nga mga katungod gigahin.

EDA52-ML-RS-01 (a prelim 2)
5 / 21

Mga Dokumento / Mga Kapanguhaan

Honeywell ScanPal Series EDA52-1 Mobile Computers [pdf] Giya sa Gumagamit
EDA520, HD5-EDA520, HD5EDA520, EDA52-0, ScanPal Series EDA52-1 Mobile Computers, Mobile Computers

Leave sa usa ka comment

Ang imong email address dili nga gipatik.