1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your VEVOR Commercial Gas Stove with Cabinet, Model GSP-18-25. Please read these instructions thoroughly before use and retain them for future reference. This appliance is designed for commercial cooking applications, offering powerful heat and durable construction.
Figure 1: VEVOR Commercial Gas Stove with Cabinet
2. Safety Information
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.
- Ensure the appliance is installed by a qualified technician in accordance with all local codes and ordinances.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- Keep the area around the appliance clear and free from combustible materials.
- Never use the appliance for space heating.
- Always ensure adequate ventilation when operating the gas stove.
- In case of a gas leak, immediately shut off the gas supply, open windows and doors, and do not operate any electrical switches or appliances. Contact a qualified technician.
3. Package Contents
Verify that all components are present and undamaged upon unpacking. If any items are missing or damaged, contact your supplier immediately.
- 1 x VEVOR Commercial Gas Stove with Cabinet
- 4 x Adjustable Feet
- 4 x Feet Installation Plates
- 1 x Pressure Regulator
- 2 x φ2.05 Nozzles (Brass) for Propane Conversion
- 16 x Screws for Feet Installation
- 1 x Instruction Manual (this document)
Figure 2: Included Components
4. Setup and Installation
Follow these steps for proper setup and installation of your gas stove. Professional installation is recommended.
4.1 Installing the Adjustable Feet
- Carefully unbox the stove and place it on a stable, flat surface, preferably on its side or back to access the bottom.
- Attach the four feet installation plates to the designated corners on the bottom of the stove using the provided screws.
- Screw the four adjustable feet into the installed plates.
- Once all feet are securely attached, carefully return the stove to an upright position.
- Adjust the height of each foot to ensure the stove is level and stable. The adjustable feet allow for a height range of 140-180mm.
Figure 3: Adjustable Feet Installation
4.2 Gas Connection and Conversion
The stove is factory-set for Natural Gas (4" WC). If you intend to use Propane (Liquefied Gas, 10" WC), you must replace the natural gas nozzles with the provided propane nozzles. This conversion should only be performed by a qualified gas technician.
- Ensure the main gas supply is turned off before making any connections.
- Connect the gas pressure regulator to the 3/4 NPT gas inlet at the rear of the stove. Ensure all connections are tight and sealed to prevent leaks.
- If converting to propane, locate the burner nozzles and carefully replace them with the smaller φ2.05 brass nozzles.
- Connect the stove to your main gas supply line.
- After connection, turn on the gas supply and check for leaks using a soap solution. Bubbles indicate a leak.
Figure 4: Gas Connection and Propane Converter
4.3 Installation Video
Watch this video for a visual guide on the installation process, including attaching the feet and connecting the gas line.
Video 1: How to Install the VEVOR Commercial Gas Stove
5. Operating Instructions
The VEVOR Commercial Gas Stove features a powerful 90,000 BTU burner with precise fire control for various cooking needs.
5.1 Ignition and Flame Adjustment
- Ensure the gas supply to the stove is open.
- Push in and turn the control knob counter-clockwise to the 'High' position. The burner should ignite instantly.
- Once ignited, adjust the flame intensity by rotating the knob between 'High' and 'Low' settings. The burner is designed with multiple flame outlets for precise control, allowing for both powerful cooking and steady simmering.
- To turn off the burner, turn the control knob clockwise to the 'Off' position.
Figure 5: Burner Flame Control (Low and High Heat)
Figure 6: Ergonomic Control Knobs
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your VEVOR Commercial Gas Stove.
6.1 Cleaning
- Always ensure the stove is cool and the gas supply is turned off before cleaning.
- The integrated, thickened stainless steel countertop and seamless design allow for easy wiping. Use a mild detergent and a soft cloth.
- The removable drip tray and stainless steel burner base effectively prevent grease buildup. Remove and clean these components regularly.
- The top plate is detachable for convenient and thorough cleaning of the burner area.
- Avoid abrasive cleaners or scouring pads that could scratch the stainless steel surface.
Figure 7: Easy Cleaning Features
6.2 Valve Replacement Video
This video demonstrates how to replace the valve, a procedure that may be necessary for maintenance or gas type conversion.
Video 2: How to Replace the Valve
7. Troubleshooting
If you encounter issues with your gas stove, refer to the following common troubleshooting steps. For complex problems, contact a qualified service technician.
- Burner not igniting: Check if the gas supply is open. Ensure the control knob is pushed in and turned correctly. Verify that the igniter is sparking.
- Weak or inconsistent flame: Check the gas pressure regulator. Ensure the correct type of gas (natural gas or propane) is being used with the corresponding nozzles. Clean the burner ports if they are clogged.
- Gas odor: Immediately turn off the gas supply. Open windows and doors. Do not operate any electrical switches or appliances. Contact a qualified gas technician or emergency services.
- Pilot light issues: If your model has a pilot light, ensure it is lit. Refer to the installation instructions for adjusting the pilot light size if needed.
8. Specifications
| Feature | Detail |
|---|---|
| Item Model Number | GSP-18-25 |
| Number of Burners | 1 |
| Single Burner Heat Output | 90,000 BTU |
| Total Heat Output | 90,000 BTU |
| Gas Input | Natural Gas 4" WC, Liquefied Gas 10" WC |
| Product Size (L x W x H) | 460 x 610 x 615 mm / 18.11 x 24.03 x 24.21 inch |
| Min. Gas Inlet Pressure | 1.0 kPa |
| Pipe Max. Pressure | 3.45 kPa |
| Connector Size | 3/4 NPT |
| Type | With Cabinet |
| Net Weight | 41.3 kg / 91.05 lbs (approx. 121.25 lbs in product data, using 41.3kg from image) |
| Material | Stainless Steel |
| Color | Silver |
Figure 8: Product Dimensions and Specifications
9. Warranty and Support
For warranty information, technical support, or to purchase replacement parts, please visit the official VEVOR website or contact their customer service. Keep your purchase receipt and model number (GSP-18-25) handy for any inquiries.
You can find more information and support on the VEVOR Store on Amazon.
