Learn about the features and usage of the STEVAL-L99615C evaluation kit from STMicroelectronics, a battery management system based on the L9961 device. This comprehensive user manual provides instructions on measuring cell voltages, battery pack temperature, and battery current, with various protection features including over/undervoltage detection and more. Find out how to configure the pre-driver stage and perform high-side or low-side operation for the CHG and DCHG MOSFETs.
Discover how to operate the X-NUCLEO-NFC05A1 using the STSW-ST25R009 Linux driver for ST25R3911B and ST25R3912/14/15 NFC frontends. This user manual outlines the RFAL library and its features, including complete RF/NFC abstraction and communication using SPI interface. Get started with the UM2375 Linux Driver.
Learn all about the UM2548 Linux Driver for STMicroelectronics' ST25R3916 and ST25R3916B devices with this comprehensive user manual. Discover complete software architecture details, hardware setup requirements, and software usage instructions. Explore features like the complete Linux user space driver, complete RF/NFC abstraction, and sample implementations with X-NUCLEO-NFC06A1 and X-NUCLEO-NFC08A1 expansion boards. Get up and running with ease using the included step-by-step instructions.
Learn how to use the ST-LINK/V2 and ST-LINK/V2-ISOL in-circuit debugger/programmer for STM8 and STM32 microcontrollers with this informative user manual. Featuring SWIM and SWD interfaces, this product is compatible with software development environments like STM32CubeMonitor. Digital isolation adds protection against over-voltage injection. Order the ST-LINK/V2 or ST-LINK/V2-ISOL today.
Learn how to enter the RMA state for STM32MP1 Series Microprocessors with this helpful Application Note from STMicroelectronics. Get guidelines and reference documents for the process.
Learn about the capabilities of the X-NUCLEO-OUT13A1 Industrial Digital Output Expansion Board from STMicroelectronics. This board provides a flexible environment for evaluating the driving and diagnostic capabilities of the ISO808-1, an octal high side switch with embedded galvanic isolation and high inductive load driving capability. With a single expansion board, users can evaluate an octal-channel digital output module with 1.0 A (max.) per-channel capability and an operating range up to 36 V/8.0 A.
The X-NUCLEO-OUT14A1 Industrial Digital Output Expansion Board for STM32 Nucleo provides a powerful and flexible environment to evaluate the driving and diagnostic capabilities of the ISO808A-1 octal high side switch. With galvanic isolation and up to 1.0 A per-channel capability, this board is ideal for industrial loads up to 36 V/8.0 A.
Learn about the X-NUCLEO-OUT09A1 Industrial Digital Output Expansion Board for STM32 Nucleo, powered by the IPS8160HQ smart power solid state relay. With optocouplers and GPIO pins, this board offers flexible evaluation and control of 0.7 A industrial loads. Compatible with NUCLEO-F401RE and NUCLEO-G431RB development boards, and stackable with other expansion boards. Discover the features and benefits of this board with UM3059 from STMicroelectronics.
Discover the powerful and flexible environment of the X-NUCLEO-OUT19A1 Industrial Digital Output Expansion Board for STM32 Nucleo. This board features the IPS8160HQ-1 octal high-side smart power solid state relay, providing safe output loads control with overcurrent and overtemperature protection. Use it to evaluate a system connected to 1 A industrial loads and benefit from galvanic isolation with 3 optocouplers. Compatible with NUCLEO-F401RE and NUCLEO-G431RB development boards, and stackable with other expansion boards.
Learn about the UM3082 X-NUCLEO-OUT14A1 Industrial Digital Output Expansion Board from STMicroelectronics. This board provides powerful and flexible environment for evaluation of driving and diagnostic capabilities of an octal high-side smart power solid state relay, with embedded galvanic isolation and 20MHz SPI control interface, in a digital output module connected to 1.0 A industrial loads. The X-NUCLEO-OUT14A1 directly interfaces with the microcontroller on the STM32 Nucleo driven by GPIO pins and Arduino® R3 connectors.
