M2 Smart Bracelet User Manual

Intelligent Blood Pressure Blood Oxygen Heart Rate Hand Ring Product Speacification

Frequently Asked Questions

1.unable to search bound hand ring or can not connect,Make sure that the Bluetootll phone is turned on and dose to file bra- celet, restart the phone application or Bluetooth connection with the search and try pairing again. Also, make sure your phone system is Android 4.4 or more, 108 8.0 or more, the phone supports Bluetooth 4.0 and Bluetooth connectivity is stable. (Make sure your phone paired Bluetooth devices not too much)

2.APP no data appearing The bracdet using manual switch the measurement or timing measurements. At first use only basic movement data (step cormter, distance, calories). With continuous use, the bracelet by a single measurement of APP appD- canon, real-Ume measurement, a key measurement di- splay data.

3.Tlle time is not accurate bracelet When the bracdet is dead, re-charging, wristbands time error may occur, connect the phone, the phone will au- tomatically synchronize bracelet time calibration.

4. The bracelet can not charge or use a short time Please use the product with the aligning char ging clip bracelet back of file main contact s, note the alignment and do not constanUy have to grip the friction caused by the shift of the charge after charge is bad. The first time you use the product, please complete the charging power consumption for the first time atter 1- 1.5 hours. Make sure the battery is fully remain in me- mory function and memory status.

5. Can not download or upgrade the hardware upgrade is interrupted. In adopting the hardware upgrade (OTA) Make sure that the bracelet is fully charged and the mobile phone net- work in stable condition.

Please refer to claim 3 connecffon uses precautions to ensure mobile application APP phone supports all the features.

6. Basic parameters
Screen size: OLED 0.86 inches
Bluetooth: BT 4.0
Battery capacity: 85Mah
Bracelet Dimensions: 46.7mm * 19.7mm * 11 .2mm
Strap size: 200mm * 16. Imm * 2.2mm
Material: PC + TPU Waterproof Levd; IP67
Packing list: Host bracelet, Wrist strap, charging cable, manual K The company reserves the right to modify the contents of this manual without prior notice, some of the features are diff erent in the corresponding version of the software are normal conditions

Warning
Please follow medical advice, take measurement results as self-diagnosis and treatment basis is very dangerous. Users with blood circulation disorders, blood pressure disease pleasetake the treatment under the guidance of a doctor~ product measurements are for reference only, and not for any medical use basis.

Intelligent Blood Pressure Blood Oxygen Heart Rate Bracelet Appearance

Bracelet

1. adapted platforms and requirements

Android

Android 4.4 or Above

IOS

IOS 8.0 or Above (Does not include Apple 4)

 

Bluetooth Phone hardware support Blutooth 4.0 ( Blutooth Connection Stable)

 

2. Preparations
First tirne use, PIS ensure battery is fully charged . If not turn on due to low battery, please use the charging clip Align with the contacts of the bracelet main back chatging for 1-1.5 hours (first use make sure the battery is full), the bracelet will indicate charging flag and display the charging status. After charging is complete, press and hold the button 5-8 seconds to boot.

Preparations

3. Connection uses
In normal use conditions, bracelet needs to be connected with the mobile application. be sure to use a mobile phone to meet the above requirements and adap ted platform device hardware requirements, tociownlmd the corresponding phone APP.

IOS Version

Android Version

Matters needing attention:

Android phones: Settings – Accessibility – All functions supported / background operation

Settings – Applications -Wearfit- supports the use of all the features
IPhone: Settings – General – Device Management – Software Trust Setting -Wearfit- allows the use of function

Mobile application language swltdwing according to the phone language Blndlng uses:

After downloading the software, please ensure the phone bluetooth is turned on, open the “Wea rfit”, the first use needs to bind the connection, click binds the bracelet, select the device appeared in the Bluetooth list, click to connect the binding and pairing successfully, will enter the Main interface of mobile phone application.

4. Precautions:

After the bracelet and mobile applications successful binding, the phone will synchronize the time and date, and start recording and analysis of movement, heart rate, blood pressure and sleep.

Bracelet: Click the button to switch wristbands interface

Bracelet function list is as follows

1. Time mode: time, date, batteiy, Bluetooth connection status display
Time mode

2. Movement recording: automatically record movement data on foot every day.
Time mode

3. Distance mode: automatically records walking distance every day.

Distance mode

4. Calories modes: automatic calories data recording per day.
Calories modes

5. Heart rate mode: current heart rate data monitoring, switch the key to heart rate interface, measurement mode will open. if not, please continue switching, bracelet appears as the most recent measurement data. Mobile applications display data by a single measurement, rea1—t1me measurement or a key measurement. (NOT E: Press the switch button to change interface, measurement data can not be synchronized to the phone application. HR interface, pls let the skin wrist above be close to the bracelet to prevent light leakage.)

Heart rate mode

6.Blood Oxygen mode: current blood pressure monitoring, switch the key to the blood pressure interface, lneasureuient iuode will open, if not, please continue switching, bracelet appears as the most recent nlcasurcincrit data. Mobile applications display data by a single measurement, real—tirne measurement or a key measurement. (NOTE: Press the switch button to change interface, measurement data can not be synchronized to the phone application. HR intertace, pls let the skin wrist above be close to the bracelet to prevent light leakage.
Blood Oxygen mode

7. Blood Pressure mode: current blood pressure monitoring, switch the key to the blood pressure interface, measurement mode will open, if not, please continue switching, bracelet appears as the most recent measurement data. Mobile applications display data by A single measurement, real-time measurement or 1: key measurement. (NOTE: Press the switch button to change interface, mcaaurcnicnt data can not be synchronized to the phone application. HR interface, pls let the skin wrist above be close to the bracelet to prevent light leakage.)
Blood Pressure mode

8.Sleep mode: automatic monitoring of the quality and status of sleep every day.

Sleep Mode

9. Powered Off: Long press the button to enter the shutdown interface, long press the button to choose whether to switch off.
Powered Off:

10..Ca.lls reminder: mobile application APP open the function of calls to reminds, click the top left corner to enter the mobile phone APP management interface ~ Device Managernent — Intelligent Reminder — selector switch. When phone calls wristband will vibrate and remind.

1 1.SMS / Applications reminder: mobile application APP open the switch of SMS alerts / reminders, click the top left corner to enter the mobile phone APP management interface – Device Management – Intelligent Reminder – selecting switch.

HR Tips

1.Most people has the heart rate of about 60- 120.

2.Most people resting heart rate is 60 to 90 beats / minute, the optimal heart rate is up to 70 beats / minute.

3.The heart rate of athletes and trained people is 40 to 60 beats / minute.

4.1-Ieart rate is always been changing, and after (§{€IC.lSC, after eating, personal circumstances factors, good or bad mood, etc., are heart rate constantly changing factors.

5.When doing Aerobic exercise to an ettective and safe condition,people’s heart rate is 170, minus age, people should hold the heart rate between 1O8 to 144.

6.Pleaee Exercise regularly, proper diet, weight control, psychological adjustment, to make themselves more healthy and happy every day.

Blood Oxygen Tips

1.0xygen saturation is the the percentage of oxygen- bound oxyhemoglobin (HbO2) capacity vs total hem-
oglobin (Hb) combined capacity, that is the concentr-ation of oxygen in the blood.

Blood Pressure Tips

1. Systo1ic blood pressure, arterial blood delivered to the highest value when referred to as “high pressure”, the heart for the next time the lowest blood pressure value reserve dilate when blood is called “low—voltage”, are referred to as systolic and diastolic blood pressure. 2.Most people has the heart rate of i8O blood pressure (low pressure) to 120 (high pressure) around.

3. Within the normal range, blood pressure has differentiation of age, gender. Generally, the elderly have the higher blood pressure than the young, men have the high blood pressure than women.

4. Blood pressure is always been changing, and after e xercise, after eating, personal circumstances factors, good or bad mood, etc., are heart rate constantly changing factors.

5. Please Exercise regularly, proper diet, weight control, psychological adjustment, to make themselves more healthy and happy every day.

This equipment has been tested and found to comply with the limits for a Class 3 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. i his equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause hannful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hannful interference to radio or television reception. which can be detennlned by tumlng the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Fteorient or relocate the receiving antenna.
– increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different lrom that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(I) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Questions about your M2 Smart Bracelet User Manual Post in the comments!
M2 Smart Bracelet User Manual [PDF]

U8 Smart Watch User Manual

Smart watch U8

Smart watch U8

User Manual

Thank you for choosing our sport healthy intelligent Bluetooth watch. You can read this manual and fully understand how to use the device, with a good experience of the functions and easy operation. This equipment is mainly used brand of smart phones to be adapted to use, you can synchronize the phone book smart phones and provides a variety of useful features and services to facilitate your work and leisure activities in the smart phones operation. This device has the following features: support for Bluetooth phone. Bluetooth message push (SMS, short message, QQ, etc., Need a installation of Bluetooth notification APK on Android smart phone), Bluetooth music player, calories, pedometer, sleep monitoring, antilost, remote camera and so on.

Before you start using this device, please install ‘BT notice’ APK on your smart phone through scanning the QR code on the right, (support Android version, Apple does not currently supported) and run, the smart watch can display the notification/reminders of the application from the Bluetooth connected smart phone synchronously via ‘message’ and ‘distal notice’, including SMS alerts, chat tool QQ, micro letters and other messages and reminders.
QR code

To use the ‘notice’ function, need to open ‘BT notice’ on the smart phone. Restart the phone and smart watches, you can use the Bluetooth connection. Scan the QR code to install ‘BT notice’ application, or visit the following link to download installation package by scanning:

http: //pan.baidu.com/s/lhqsuR7A, search ‘Bluetooth notice’ at Google Play APP store to download and install it. By registering overseas can log on Google Play, then scan the QR code, or visit the link to download the APK.

QR code 1

https://play.google.com/store/apps/details?id=com.oinom.btnotification&hl=zh-CN

The company reserves the right without prior notice to the contents of the manual to make changes.
(1)How to wear and operate.

Wear this Bluetooth smart watch in the correct direction, the power button should be on the right of the watch, three touch buttons located beneath the LCD.

LCD Display

– On/off button, exit buttons: 1) Turn on the watch: press the on/off button power for 2 seconds, the watch shows main interface. 2) Turn off the light: press the on/off button shortly. 3) Turn on the clock: press the on/off button at the third time, the watch shows the clock.Touch keys at lower left corner, Menu/Enter key: Press the Menu/Enter key when the watch is on standby clock interface, to enter main menu interface.

– Middle touch key, dial into/flip key: 1) Press this button when the watch is on main menu interface, to enter dial interface. menu operation as the next flip key, 2) Press dial into/flip key to adjust the volume when playing music and making calls.

– Lower right corner of the touch keys, return/hang up button: standby no effect, like the return menu operation keys, call hang up button.

In addition, Sliding fingers to touch the screen can achieve the following functions:
– Slide you finger around the touch screen: menu page.
– Finger tap the touch screen: enter the menu.
– Finger down from the top of the screen vertical stroke: Exit menu.
Connect to Bluetooth devices, disconnection and continuous connection

There are 2 ways to realize the Bluetooth connection: 1) the watch rise up a Bluetooth connection requirement, 2) the smart phone rise up a Bluetooth connection requirement After a successful connection of Bluetooth, Smart Watch will automatically send a request requires reading smart phone phonebook and call log (involving personal privacy, some smart phone do not turn on this feature) Please confirm the smart phone, or else the watch can not be synchronized to the phone book and call history will affect its normal use.

If the distance between the watch and smart phones is more than 10 meters (there should not be any obstructions, or it might shorten the strength of the signal) they will be automatically disconnected, if the distance can be recover to 10 meters less again within 5 minutes, the connection could be recovered automatically. Both of the watch and smart phone will alarm when disconnection happens.

Features
Bluetooth, search for Bluetooth devices, connection, disconnection and other operations.
– Dialing Press this button when the watch is on main menu interface, to enter dial interface, or dial numbers though ‘call log’ menu.
* Do not block the speaker or microphone position during a call.
– Information Read the short message from the connected smart
phone synchronously
– Phone book synchronization of the phone book.
– Call log Synchronize phone call records of the “missed call”,
“Dialed”, “Received Calls”, “All records”, Maximum 30 records.
– Bluetooth notification Can view the push notifications of
applications like QQ, short messages from connected smart phone.
– Bluetooth music can play music on your smart phone via Bluetooth.
Some smart phones will need to open the music player software to run properly. Press dial into/flip key to adjust the volume of music, Or directly touch the “+”,”-“ buttons on the screen. The watch will return to the initial interface after stopping pressing the key or screen, no need to press exit key manually.
– Remote camera control via Bluetooth smart phone camera to take the pictures.
* The smart phone should not be on the status of screen locking, or this function won’t work properly
– Pedometer
Pedometer designed specifically for health caring customers, to ensure the accuracy of the steps counting, we recommend the user to walk normally with a head and chest rising posture.

On the top of the pedometer displays time counting, on the left is steps counting, the distances (meters) is showing on the right, the consumption of calories is on the bottom. To start/stop the

counting by using the button in the middle. On the right above the screen is settings, it can adjust the parameters, reset or view the records. The pedometer can run in the background.

To avoid false count, the watch will not show up the numbers immediately after taking the initial steps for each user, but it starts to display after a stable walk counting, the number of previous steps is counted already.

* The Pedometer will clear the record of steps at one time everyday, then restart counting and accumulating till next time clearance. User can also clear the record by ‘reset’ button in the option menu.
– Anti-lost alarm When the connected smart phone is far away from watch over a certain distance. The watch will sound an alarm.
– Power saving mode
– Settings the clock setting, The tone mode, volume, language, display settings, view battery power, as well as Bluetooth settings and restore the factory settings.
(4) Bluetooth smart watch can connect to a standard USB data cable.
To charge be battery through computer USB port or USB power
bank.

Note: To reset the watch to default settings, please key in the initial
password “1122”.

FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device is measured RF output power is less than the SAR exclusion threshold value for human head and body. Therefore, SAR test is not necessary.

Questions about your U8 Smart Watch User Manual? Post in the comments!
U8 Smart Watch User Manual [PDF]