Onn Bluetooth In Ear Headphones Manual [17LY80]

ONNBTINEAR BLUETOOTH IN-EAR HEADPHONES User Manual

ONN

BLUETOOTH IN-EAR HEADPHONES
Model: 17LY80

What’s in the box

What's in the box

 

Charge
Charge

 

Bluetooth® Connect

Bluetooth Connect

 

Play
Play

 

Power Off
Power Off

 

Power On
Power On

 

Wearing Overview
Wearing Overview

Troubleshooting
I cannot turn the headphone on
Make sure that you fully charge the headphone before turning it on.

My mobile phone is not able to find the Bluetooth headphone
Check that the headphone is in pairing mode (Blue/Red indicator light flashes quickly). Delete the existing Bluetooth headphone name in phone, and search again. If still no search result, please restart the headphone and phone, and try again.

After successfully pairing my mobile phone and Bluetooth headphone, It got disconnected
Check if the battery level is too low. Check whether the headphone is within 10 meters (30 feet) of your phone. The connection may be affected by obstructions such as walls or other electronic devices. Try moving closer to the device you are connected to.

When I am answering a call, I cannot hear anything
Check whether the phone is connected with Bluetooth headphone, instead of speaker or phone when answering a call. Try adjusting the volume on your mobile phone. Press the Vol+ or Vol- Buttons to adjust the volume.

When I am listening to the music, I cannot hear anything
Press the Vol+ Button to adjust the volume. Reconnect the headphone with your mobile phone. Check if the media is playing on the phone.

I cannot charge the headphone
Check whether the charging pin and the other end are connected well. Check whether the charging cable is functional.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Questions about your ONN BTINEAR BLUETOOTH IN-EAR HEADPHONES? Post in the comments!
ONNBTINEAR BLUETOOTH IN-EAR HEADPHONES Manual [PDF]

Onn Universal Remote Manual and Codes [ONB13AV004]


Universal Remote Model:ONB13AV004

PRODUCT GUIDE


Table Content

Introduction ………………………………….. 2
Battery Installation…. …………………. 3
Care and Maintenance ………………. 3
Button Functions …… ………………….. 4
Programming Your Remote . …… 6
Direct Code Entry ……………………….. 6
Auto Code Search ……. ………………… 8
Contro\\ing Combo Devices ………9
Master Vo\ume Feature ……………. 10
Reset to Factory Settings . ……….. 11
Troubleshooting . ……. …………………. 12
FCC Statement.. … ………………………. 13
Remote Code Section ….. …….. . .. 14 [Scroll to the bottom]

Congratulations on your purchase of the ONN Universal Remote. This remote Is capable of operating thousands of audio/vldeo devices Including TVs DVD players, cable, satellite receivers, and more!

IMPORTANT:
SAVE THIS MANUAL AND CODE LIST FOR FUTURE REFERENCE


QR Cocle

Scan the QR code to view our helpful demonstration video for programming your QNN remote.

Battery Installation
Your universal remote requires two (2) AAA Alkaline batteries (not included).

To InsWll Me BaNeries:
1. Remove the battery compartment cover by sliding the cover down.
2. Match the (+) and (-) marks on the batteries to the (+) and (-) marks inside the battery compartment, then insert two (2) AAA Alkaline batteries, Be sure to use fresh batteries.
3. Slide the battery compartment cover back into place.

Note: If your remote stops operah”ng properly,
replace the batteries with new ones. The remote
will retain the codes you have programmed for up
to 10 minutes after the batteries are removed.

Battery Precautons:
– Do not mix old and new batteries.
– Do not mix allkahne, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-“MH, etc.) batteries.
– Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.

Care and Maintenance
– Keep the remote away from moisture, If it gets wet, dry it immediately.
– Use and store the remote at normal household temperatures.
– Use a soft, damp cloth to clean the remote.
– If the remote is not going to be used for a long period of time~ remove the batteries from the remote.
– Handle the remote with care.

Button Function

 

Button Function, Cont.

Programming Your Remote
Your ONN universal remote control is designed to control up to 4 different audio/video devices such as TV DVD, VCR, sate|lite, cable and audio using only one remote. To use this remote, you will need to program it to control the devices of your choice. There are two ways to program the remote – direct code entry or auto code search.

Direct Code Entry (Recommended)

To view a helpfull demonstration video for programming your ONN remote, see OR code on page 2 of this manual.

Programming Notes
– If your device does not respond to the remote after trying all codes listed or your brand is not li3tcd in thc codc Ibt, u3c thc Auto Codc Search method to program your remote.
– Sometimes the first code that “worl<s” with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list tor more functionality
– You can use any device button to control other devices in your home entertainment system. For example, you can use the AUX device button to control an audio receiver or a DVD, VCR, satellitel etc.
– For combination devices, you may have to enter a code for each device. FOr example, for a VCR/DVD device, you may have to enter a code for the DVD under the DVD button and enter a code for the VCR using a different device button on the remote .
– Write down the code found to operate your device for future reference.

Auto Code Search
The Auto Code Search searches automatically through all of the codes stored in this remote. Read all the following steps prior to starting the auto search as you will need to be prepared to lock-in the proper code when found.

 

To view a helpful demonstraffon video for programming your ONN remote, see OR Dode on page 2 of Mis manuaL

Programming Notes

– This process may take several minutes as the remote contains many codes.
– The SETUP button can be used during the search process to reverse the dlrectlon of the search of the remote codes. For example, if you miss the code for your device and the remote is continuing to search (as indicated by the blinking red Hght), press the SETUP button and the code search will reverse direction and return to the code.
– When using the Auto Code Search programming method, the device button corresponding to the type of device you want to control must be selected (for example, the TV device button must be selected in step 3 if you want to control a TV, the DVD/VCR device button for a DVD player, etc.)
– Sometimes the first code that “works with your device may operate only a few functions of your device. There may be another code In the code list that performs more functions. Continue the code search as directed above until the best code IS found.

Controlling Combo DevfDes
Some Combo devices Ce.g. TVNCR, TV/DVD, DVDNCR, etc~) will require you to setup up two diffell ent Mode buttons to Gont!oI both parts of the Combo device. For example, if you have a TV/DVD Combo, you might need to set up one code under the fV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part.

Master Volume Feature

Master Volume Feature
The Master Volume Feature allows you to select a single device (fV or audio receiver) that the volume control always controls. For example, the remote can be in TV mode while the volume buttons control the volume on your audio receiver instead of your TV.

Master Volume Feature, Cont.



Troubleshooting

Remote does not operate your device.
– Make sure the batteries are fresh and installed correctly.
– Aim the remote directly at your device, and make sure that there are no obstructions between the remote and device.
– Make sure you select the appropriate device on the remote you wish to control, for example, TV for TV DVD for DVD, etc.
– Try programming the remote with a different code. See Direct Code Entry section.
– Remote may not be compatible with your device.

Remote does not operate some features of your device.
– Sometimes a particular code might operate a few features but not all. Try programming remote with a different code from the code fist. See Direct Code Entry section.
– Remote may not be able to operate all features of your device or button names may be different than that of you~ original remoles.

Remote Code is not available for a combo device ( e.g. TV/VCR, TV/DVD)
– Some Combo devices Ce.g. TV/VCR TV/DVD, DVDNCR, etc.) will require you to set up two different Mode buttons to control bofh parts of the Combo device. For example, if you have a TV/DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part.

BEFORE YOU RETURN THIS PRODUCT TO THE STORE, PLEASE VISIT THE WEBSITE www.myOnffRemote.corn FOR FURTHER ASSISTANCE; Or, contact us at 1-B7-654-B4B3 between 7:3OAM–5:00 PM CST.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subfact to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received , including interference that may cause undesired operation.

Warning: Changes or modifications to tffiS unit not expressly approved by the party responsible for compliance could void the user’s authority to opef ate the equipment.

NOTE:
This equipment has been tested and found to comply with file limits far a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instaiiation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio./fV
technician for help.

Distributed by WaI-Mart Stores, Inc.
Bentonville AR 72716
MADE IN CHINA











 

https://usermanual.wiki/Onn/OnnOnb13Av004Manual1002608.1988461573/view

 

*Note for this document conversion, the “codes” section (page 14-24) is not copyable text. For these pages, use the images extracted from http://www.extractpdf.com/