Huawei EchoLife HG8245Q2 GPON User Manual

Huawei EchoLife HG8245Q2 GPON User Manual

EchoLife HG8245Q2 GPON Terminal Quick Start
HUAWEI

Safety Precautions
To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device.

Safety precautions:
– Store devices and accessories in temperature –10°C to +35°C and relative humidity 30%–85% RH for at most 9 months. If the ambient temperature or relative humidity is overhigh or overlow, the device may be faulty.

– The ONT is used for only FTTH.

– Do not look directly into the optical port without eye protection.

– Keep the device out of the reach of children as the components or accessories may be swallowed.

– Install the device in strict compliance with the requirements of the supplier. Reserve a space of at least 10 cm above and around the device for heat dissipation. During the installation, keep the device away from electric appliances that generate strong magnetic or electric fields, such as microwave ovens, refrigerators, and mobile phones.

– The power supply voltage of the device must meet the requirements on the input voltage of the device.

– Do not use any power adapters that are not in the standard configuration.
Otherwise, the device may be abnormal or unsafe.

– Dry your hands before connecting or disconnecting cables. Stop the device and switch off the power before connecting or disconnecting cables.

– Do not place any object on the device, so that the device will not be damaged due to overheating or deformation.

– Prevent objects, such as metal, from entering the device through the heat
dissipation hole.

– Switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable, during periods of lightning activities. The socket-outlet shall be installed near the power adapter and shall be easily accessible. Before use the power adapter, please check no damage on the adapter.

– Do not lead the strength member of the optical fiber or other metal parts indoors. Do not install telephone lines, network cables, power adapters or power adapter cables outdoors. Adopting these measures will help prevent device damage and bodily injuries which are especially prone during thunderstorms.

– If an abnormality occurs, for example, liquid entering the device, smoke, unusual sound, and smell, stop the device immediately, switch off the power, disconnect all cables (such as the power cable, optical cable, and network cable) to the device, and contact the authorized service center.

– Do not disassemble the device without permission. In the case of a device fault, contact the authorized service center.

– Dispose of the packing materials, expired batteries, and old or abandoned
devices in accordance to local laws and regulations (recycling them is strongly recommended).

– Do not change the structure, safety design, or performance design of the device without prior authorization.

– If the power adapter is damaged and its internal circuit is exposed due to manmade factors, do not touch the exposed circuit, which may bring safety risks.

Product Overview
Product: HG8245Q2
Function
4 Ethernet ports
2 POTS ports
1 USB port
2.4G (3*3 MIMO)+ 5G (3*3 MIMO)

Technical Specifications

Technical Specifications

NOTE
The appearance shown in this document may be different from the actual appearance of the product. The actual product provided by the carrier prevails.

Installing the GPON Terminal
Caution: Do not install GPON terminals outdoors or on the outdoor cabinets.
2. GPON terminals can be placed on a workbench. Do not install GPON terminals in other modes, such as the ceiling.
3.The terminal cannot be connected to other devices such as GPON terminals, switch and router.

Mounting a GPON terminal on the desk
The figure below shows a GPON terminal that is horizontally placed on a desk.
Mounting a GPON

Connecting Cables
1 Optical port
2 Ethernet port
3 POTS port
4 USB port
5 Power
6 Power switch

Connecting Cables

7 WLAN switch
8 WPS switch
9 Reset
7 WLAN switch

Step 1: Use an optical fiber to connect the optical port on the ONT and the optical port on the wall.
NOTE
1. The type of the optical connector connected to the optical port in the wall is determined by practical conditions.
2. To ensure normal use of fibers, make sure that the fiber bend radius is larger than 30 mm.

Step 2: Use a network cable to connect the LAN port to a PC or the Ethernet port on the IP STB.

Step 3: Use a phone line to connect the TEL port to a phone or fax machine.

Step 4: Use a power adapter to connect the POWER port to the power socket.

NOTE
The preceding figure connects the power adapter as an example. When connecting the backup battery unit , please see the usage guide to the backup battery for details .

Step 5:  Use a USB data cable to connect the USB port to the USB storage device.
Step 6:  Press the ON/OFF power switch.
Step 7: Press the WLAN switch to enable the Wi-Fi access function. By default, this function is enabled.
Step 8: Press the WPS switch to enable the WPS encryption function.
NOTE
Before enabling the WPS encryption function of a GPON terminal, ensure that the function is set in the system software in advance. After successful setting, press the WPS switch for the settings to take effect.

Logging in to the Web Configuration Window
Step 1:  Set the IP address of the PC in the same subnet as the management IP address of the GPON terminal.
NOTE
You can find the default management IP address on the nameplate of the device.

Step 2:  Enter the management IP address of the GPON terminal in the
address bar of Internet Explorer and press Enter.
The login window is displayed.

Step 3:  In the login window, select your preferred language, enter the user
name and password (printed on the nameplate of the device.),and
click Login. After the password is authenticated, the Web configuration window is displayed.
NOTE
-If you do not perform any operations after logging in to the system for five minutes, you will exit the system and the system automatically returns to the login interface.
-The system will be locked if you input incorrect user name and password three consecutive times. One minute later, it will be unlocked.
-Change the initial password after logging in to the web page.

Configuring Wi-Fi Parameters
Step 1: Choose the WLAN tab and choose 2.4G Basic Network Settings. (If you want to configure 5G Wi-Fi, choose 5G Basic Network Settings.)

Step 2: In the pane, select the Enable WLAN option box. In the dialog box that is displayed, set the basic Wi-Fi parameters, including the SSID, authentication mode, and encryption mode.
-SSID: See the nameplate on the device
-WPA PreSharedKey: See the nameplate on the device
SSID indicates the name of a wireless network searched by the Wi-Fi terminal; WPA PreSharedKey indicates the authentication password for the Wi-Fi terminal to access a wireless network.

Step 3:  Click Apply.
NOTE
ONTs support Wi-Fi. The wireless network coverage of an ONT is affected by walls (number, thickness, position, and material), ceilings, and other objects that wireless signals need to traverse. Besides, the material type and background radio frequency (RF) noise also affect the coverage of a wireless network. You can maximize the coverage of a wireless network using the following methods:

1. Decrease the number of walls and ceilings between the ONT and other network devices.
Each wall or ceiling reduces the coverage diameter of a wireless network by 1 to 30 meters. Place the ONT at a proper place where wireless signals need to traverse a minimum number of walls and ceilings.

2. Observe the straight line rule when installing network devices.
The distance for which signals have to traverse at a 45° corner of two 0.5 meter-thick walls reaches approximately 1 meter. Therefore, place devices at places where signals can directly traverse walls or ceilings.

3. Note the impact of building materials on the wireless network  coverage.
A metal door or aluminum wall may limit the coverage of a wireless network. Install access points, wireless routers, and computers, so signals can traverse walls or open passageways. Materials and objects such as fiberglass products, metal products, insulation walls, filing cabinets, bricks, and concrete weaken wireless signals.

4. When connecting an ONT to a wireless network, keep it far from
the following devices:
– Electronic devices or components that produce RF noises. (Keep a distance of more than 2 meters between such a device and the ONT.)
– 2.4 GHz wireless mobile phones and X-10 devices (such as microwave ovens, home security systems, blue-tooth devices, and refrigerators) greatly weaken or even eliminate wireless signals. Even when a 2.4 GHz wireless mobile phone is not connected to a wireless network, the phone base still sends signals that interfere the wireless network.

5. Recommended installation height: ≥ 1 m (distance between the
ONT and floor).

6. Distance between the ONT and nearby walls: ≥ 30 cm (reserving
enough space around the ONT when the ONT is horizontally placed).

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio  ommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installationinstructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQs
The LOS indicator blinks.
� If the LOS indicator blinks once two seconds, check whether the pigtail fiber is properly connected and the connector is clean.
� If the GPON terminal blinks twice a second, contact the service provider for help.

The PON indicator is off.
� Check whether the OPTICAL port and optical fiber is properly connected.
� The GPON terminal fails to register with the upper-layer device. Contact the service provider for help.

The phone does not ring upon an incoming call but communication is in normal state when the phone is in off-hook state.
� The GPON terminal provides a maximum of 60 V AC ringing current
voltage. Check whether the ringing current voltage of the phone is higher
than 60 V AC. If it is higher than 60 V AC, replace it with another phone.

How to reset the GPON terminal?
� Press Reset by using a needle-type object.

How can I restore factory defaults?
� Press Reset by using a needle-type object for longer than 10s to restore
factory defaults and reset the GPON terminal. If the indicator is off and then is lit, the system restarts successfully.

Warranty Card

 

Limited Warranty
Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (Huawei for short) warrants its access terminals (“Products”) to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product (“Warranty period”). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge.
Special Notice:
1. The warranty card shall be applicable only after being stamped by the dealer.

2. The warranty card must be preserved in good condition and free of any scratch or alteration.

3. To claim such service for defects that are not included in the following exclusion terms, the warranty card and the invoice that records that product serial number shall be presented to a Huawei authorized service partner.

Exclusions:
In any of the following cases, the warranty card becomes unenforceable or
inapplicable without prior notice:

1. The defects are caused by improper handling in transportation and assembly.
2. The defects are caused by the fact that the product is dismantled or altered by anyone that is not from a Huawei authorized service partner.
3. The defects are caused by the fact that the product is used in a harsh environment that is not suitable for the operation of the product.
4. The defects are caused by any force majeure including but not limited to fire, earthquake, lightning, and tsunami.
5. The defects are caused by the fact that the product is used or handled incorrectly, roughly or not as instructed in the applicable User Guide.
6. The normal wear and tear, including but not limited to the normal wear and tear of the shell and the power module, shall not be covered by the limited warranty.
7. The warranty card is altered or illegible, or the product serial number recorded on the warranty card is inconsistent with the actual one imprinted or labeled on the product.

In any case that is not covered by this limited warranty or should the warranty expire, Huawei shall charge for the service(s) claimed for the products if the product is still remediable. Huawei reserves all rights to interpret this limited warranty.

Huawei

Qualification Card

Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The information in this document is subject to change without notice. Unless otherwise stated, this guide serves only as a guide. All statements, information, and recommendations in this document do not constitute a warranty of any kind, expressed or implied.

 

https://usermanual.wiki/Huawei-Technologies/HG8245Q2.User-Manual/pdf

Huawei B525 LTE CPE User Guide [B525S-65A]

Huawei B525 LTE CPE User Guide [B525S-65A]

HUAWEI

1. Product Overview

Product overview-1

Product overview-2

a. Power indicator
b. Network status indicator
c. Wi-Fi®/WPS indicator
d. LAN/WAN indicator
e. Signal strength indicator
f. Power input
g. LAN/WAN port
h. External antenna sockets
i. USB port
j. Landline phone port
k. Reset button
l. micro-SIM card slot
m. WPS button
n. Power button

 

2. Setup

Setup

Insert a micro-SIM card into the micro-SIM card slot as shown in the preceding diagram and then connect the power adapter to the B525 router. The router will turn on automatically and search for available mobile networks.

The following indicators will turn on when the router has successfully connected to a network.

CyanCyan/blue/yellow: Connected to a mobile network.

WhiteWhite: More signal bars indicate a stronger signal.

Swich Do not insert or remove a micro-SIM card when the router is running, as this may affect performance or damage the micro-SIM card.

 

3. Connecting to your router’s Wi-Fi network

Connecting to your router's Wi-Fi network

Once the router has connected to a mobile data network, you can connect your computer or mobile phone to the router’s Wi-Fi network to access the Internet. Please refer to the label on the bottom of the router for the default wireless network name (SSID) and password (Wi-Fi KEY).

i– When the Wi-Fi indicator is steady on, Wi-Fi is enabled. To enable or disable Wi-Fi, refer to the help section on the router’s web-based management page.

– Ensure that you promptly change the Wi-Fi network name and password on the web-based management page to prevent unauthorized access to your Wi-Fi network. Once you have changed the password, you will need to reconnect to the router’s Wi-Fi network.

4. Configuring your router

Configuring your router

You can configure the router using the web-based management page. Please refer to the label on the bottom of the router for the default IP address, user name, and password.

More information can be found in the help section of the web-based management page.

iYou will be prompted to change the default login password for the web-based management page to prevent unauthorized users from changing the router’s settings.

5. Optional configurations

featuresThe features described in this section are for reference purposes only. Your router may not support all of these features.

1. Connecting multiple devices
You can connect a computer, or landline phone to the router to access the Internet, make telephone calls, and more.
Connecting multiple devices

2. Installing external antennas
You can install external antennas to improve signal reception. Please contact your network service provider to purchase the antennas. If you only require one antenna, plug it into the socket.

Installing external antennas

-Turn off the router and unplug the power adapter before installing any external antennas.
– External antennas are only suitable for indoor use. Do not use external antennas during thunderstorms.
– Only use external antennas provided by your network service provider.

3. Accessing the Internet through an Ethernet port
You can connect the router to a wall-mounted Ethernet port using an Ethernet cable to connect to the Internet when you have used up your data allowance.
Configure the relevant settings on the web-based management page before connecting to the Internet through an Ethernet port. More information can be found in the help section of the web-based management page.

Accessing the Internet through

4. Downloading Huawei HiLink App
Scan the QR code to download the Huawei HiLink App and configure the router from your phone.

Downloading Huawei HiLink App

6. Additional information

If you are experiencing any issues with the router:
– Restart the router.
– Refer to the help section on the web-based management page.
– Restore the router to its factory settings.
– Contact your network service provider.
Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region.

iThe illustrations in this guide are for reference purposes only and may not reflect the exact appearance of your product. Please contact your network service provider for more detailed information.

7. FAQs
How do I restore factory settings?
When the router is turned on, press the reset button for approximately 3 seconds using a pointed object turned on until the indicator starts to blink. Restoring factory settings will clear all customized settings. Proceed with caution.
How can I connect to the router using Wi-Fi Protected Setup (WPS)?

1. Ensure that Wi-Fi is enabled on the client.
2. Press and hold the WPS button on the router for two to five seconds to set up a 2.4 GHz WPS connection, or press and hold the WPS button on the router for more than five seconds to set up a 5 GHz WPS connection.

Why is the content displayed on the Web UI management page not up to date?

Depending on your browser’s cache, the content for your device on the Web UI management page may not be up to date. Manually clear your browser’s cache (for example, open your browser and choose Internet Options > General > Browsing history > Delete.) and re-launch the Web UI management page.

8. Troubleshooting

Why is the Cyan indicator red after I have finished configuring the router?

1. Make sure you have a working micro-SIM card and ensure that it is inserted properly.
2. Move the router to an open space free from obstructions and make sure you have an available mobile network in your area.
3. If the problem persists, please contact your network service provider.

Why is the Cyan indicator status steady on cyan, blue, or yellow, but the White indicator is off?
Your mobile network has poor reception. Move the router to a place with better reception.
Why can’t I access the router’s web-based management page?
1. Ensure that your computer is connected to the router through an  thernet cable or Wi-Fi.
2. Ensure that your computer is set to obtain an IP address and DNS server address automatically.
3. Restart your browser, or try using another browser.
4. If the problem persists, restore the router to its factory settings.

9. Safety information

This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device.

Electronic device
Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.

Interference with medical equipment
– Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited.
– Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.
– Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.

Areas with flammables and explosives
– Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols.
– Do not store or transport the device in containers with flammable liquids, gases, or explosives.

Traffic security
– Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
– Concentrate on driving. Your first responsibility is to drive safely.
– RF signals may affect the electronic systems of motor vehicles. For more 13 information, consult the vehicle manufacturer.
– Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates.
– Wireless devices may interfere with the airplane’s flight system. Do not use your device where wireless devices are not allowed according to the airplane company’s regulations.

Operating environment
– Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions.
– Before connecting and disconnecting cables, stop using the device and disconnect it from the power supply. Ensure that your hands are dry during operation.
– Place the device on a stable surface.
– Keep the device away from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or refrigerator.
– During thunderstorms, power off your device and remove all cables connected to it to protect against lightning strikes.
– Do not use your device during thunderstorms to protect your device against any danger caused by lightning.
– Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -20 °C to +70 °C. Extreme heat or cold may damage your device or accessories.
– Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your device with towels or other objects. Do not place the device in a container with poor heat dissipation, such as a box or bag.
– To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.
– Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle.
– Do not place any object, such as a candle or a water container, on the device. If any foreign object or liquid enters the device, immediately stop 14 using it, power it off, and remove all cables connected to it. Then, contact an authorized service center.
– Observe local laws and regulations, and respect the privacy and legal rights of others.
– Do not block device openings. Reserve a minimum of 10 cm around the device to dissipate heat.
– Stop using your device or applications for a while if the device is overheated. If skin is exposed to an overheated device for an extended period, low temperature burn symptoms, such as red spots and darker pigmentation, may occur.
– Do not touch the device’s antenna. Otherwise, communication quality may be reduced.
– Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion.
– The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
– Keep the device in a place with good reception. The distance between the device and other metal materials (such as metal brackets or metal doors and windows) should be greater than 25 cm and the distance between the device should be greater than 30 cm.

Child’s safety
– Comply with all precautions with regard to child’s safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking hazard. Keep away from children.
– The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.

Accessories
– Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.
– Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous.

Please contact your retailer for information about the availability of approved accessories in your area.

Power adapter safety
– The power plug is intended to serve as a disconnect device.
– For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.
– Unplug the power adapter from electrical outlets and the device when not in use.
– Do not drop or cause an impact to the power adapter. If it is damaged, take it to an authorized service center for inspection.
– If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.
– Do not touch the power cord with wet hands or pull the power cord to disconnect the power adapter.
– Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.
– If your power adapter has been exposed to water, other liquids, or excessive moisture, take it to an authorized service center for inspection.
– Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1/UL60950-1 and has been tested and approved according to national or local standards.

Cleaning and maintenance
– During storage, transportation, and operation of the device, keep it dry and protect it from collision.
– Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such as a microwave oven or hair dryer.
– Do not expose your device or accessories to extreme heat or cold. These environments may interfere with proper function and may lead to fire or explosion.
-Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion.

– If the device is not going to be used for an extended period of time, power it off, and remove all cables connected to it.
– If anything unusual occurs (for example, if the device emits smoke or any unusual sound or smell), immediately stop using it, power it off, remove all cables connected to it, and contact an authorized service center.
– Do not trample, pull, or excessively bend any cable. Doing so may damage the cable, causing the device to malfunction.
– Before you clean or maintain the device, stop using it, stop all applications, and disconnect all cables connected to it.
– Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean the device or accessories. These substances may cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to clean the device and accessories.
– Do not place magnetic stripe cards, such as credit cards and phone cards, near the device for extended periods of time. Otherwise the magnetic stripe cards may be damaged.
– Do not dismantle or remanufacture the device and its accessories. This voids the warranty and releases the manufacturer from liability for damage. In case of damage, contact an authorized service center for assistance or repair.

Disposal and recycling information
recyclingThe crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more

information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/.

Reduction of hazardous substances
This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/certification.

EU regulatory conformance
Statement
Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

The most recent and valid version of the DoC (Declaration of Confirmation) can be viewed at http://consumer.huawei.com/certification.
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.

Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

ErP Product Information
Hereby, Huawei Technologies Co., Ltd. declares that the product meets the directive 2009/125/EC and its implementation regulation (EC) NO 1275/2008 amended by (EC) 278/2009,(EC) 642/2009,(EU) 617/2013,(EU) 801/2013,and its implementation regulation (EC) NO 278/2009.
The power consumption of product in networked standby if all wired network ports are connected and all wireless network ports are activated is 6.9 W.
For the product information displayed on the manufacturers’ freely accessible websites required by (EU) No 801/2013, please visit http://consumer.huawei.com/certification.

Frequency Bands and Power
(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.

The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: GSM900/1800, WCDMA B1/B8, LTE Band 1/3/7/8/20/28/32/38/40/41, WIFI 2.4G/5.0G.

Accessories and Software Information

It is recommended that the following accessories should be used:
Adapters: HW-120200X01 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R, Z or K, depending on your region)

The product software version is 11.232.08.DM.00. Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the

manufacturer have been verified and are still compliant with the related rules.
All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, please see the DoC (Declaration of Confirmation) at http://consumer.huawei.com/certification.

FCC Regulatory Compliance
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user’s authority to operate the equipment.
This device is intended to be attached to a receiver that is not used to receive over-the-air broadcast signals. Connection of this device in any other fashion of the FCC Rules, part 15.

Restrictions in the 5 GHz band:
Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System (MSS) operations.

10. Legal Notice

Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates (“Huawei”).

The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders.

Trademarks and Permissions

HUAWEI Manualare trademarks or registered trademarks of Huawei Technologies Co., Ltd.

LTE is a trademark of ETSI.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of
Wi-Fi Alliance.
Other trademarks, product, service and company names mentioned may be the property of their respective owners.

Notice
Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers.
Thus, the descriptions herein may not exactly match the product or its accessories which you purchase.

Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability.

DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy.

https://usermanual.wiki/Huawei-Technologies/B525S-65A/pdf

Adding a contact to your favorites – Huawei Mate 10

Adding a contact to your favorites

Add frequently contacted people to your favorites to make them easier to find.
1. Open Contact Contacts.
2. Touch and hold the contact you want to add to your favorites, and then touch Add to favorites.

ifWhen viewing contact details, touch Starto add the contact to your favorites.

– Add contacts to your favorites in batch : Touch Add on the favorites screen, and choose the
contact you want to add, and then touch . If the contact has already been added, touch to
add the contact to your favorites.

– Edit your favorites: Touch Edit on the favorites screen. Drag next to a contact to adjust the
position of the contact in your favorites list.

– Remove contacts from your favorites: Touch Edit on the favorites screen. Select the contacts
that you want to remove from your favorites, and then touch Remove.

Questions about your Huawei Mate 10? Post in the comments!
Huawei Mate 10 Manual [PDF]

Legal Notice – Huawei Mate 10

Legal Notice

Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates (“Huawei”). The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile,  isassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders.

Trademarks and Permissions
Huaweiare trademarks or registered trademarks of Huawei Technologies Co., Ltd.  Android™ is a trademark of Google Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license.

Other trademarks, product, service and company names mentioned may be the property of their respective owners.

Notice
Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories which you purchase.

Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability.

Third-Party Software Statement
Huawei does not own the intellectual property of the third-party software and applications that are delivered with this product. Therefore, Huawei will not provide any warranty of any kind for third party software and applications. Neither will Huawei provide support to customers who use thirdparty software and applications, nor be responsible or liable for the functions or performance of thirdparty software and applications.
Third-party software and applications services may be interrupted or terminated at any time, and Huawei does not guarantee the availability of any content or service. Third-party service providers provide content and services through network or transmission tools outside of the control of Huawei.

To the greatest extent permitted by applicable law, it is explicitly stated that Huawei shall not compensate or be liable for services provided by third-party service providers, or the interruption or termination of third-party contents or services.

Huawei shall not be responsible for the legality, quality, or any other aspects of any software installed on this product, or for any uploaded or downloaded third-party works in any form, including but not limited to texts, images, videos, or software etc. Customers shall bear the risk for any and all effects, including incompatibility between the software and this product, which result from installing software or uploading or downloading the third-party works.

This product is based on the open-source Android™ platform. Huawei has made necessary changes to the platform. Therefore, this product may not support all the functions that are supported by the standard Android platform or may be incompatible with third-party software. Huawei does not provide any warranty or representation in connect with any such compatibility and expressly excludes all liability in connection with such matters.

DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS  OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

This guide is for reference only. The actual product, including but not limited to the color, size, and screen layout, may vary. All statements, information, and recommendations in this guide do not constitute a warranty of any kind, express or implied.

Please visit http://consumer.huawei.com/en/support/hotline for recent updated hotline and email address in your country or region.
Model: RNE-L01
RNE-L21
RNE-L03
RNE-L23
V100R001_03

QUALCOMM

 

List of Safety Features – Huawei Mate 10

List of Safety Features

Huawei phones come with a number of security features to keep your data secure.

Fingerprint recognition: Use a fingerprint to unlock your screen, open encrypted files, unlock apps, and make secure payments. For more information, see Fingerprint recognition.

Encrypting a microSD card: Encrypt your microSD card to prevent unauthorized access to your data. A password must be entered when the microSD card is inserted into another phone. For more information, see Setting microSD card password.

Setting your SIM card PIN: Enable the SIM lock to prevent others from using your SIM card. You will need to enter your SIM card PIN each time you turn on your phone or insert your SIM card into another phone. For more information, see Setting your SIM card PIN.

Blocking spam messages: Use the harassment filter and blacklist in Phone Manager to block spam calls and messages. For more information, see Blocking spam messages.

Harassment filter: Use the harassment filter and blacklist in Phone Manager to block spam calls and messages. For more information, see Harassment filter.

App Lock: Use the App Lock in Phone Manager to lock apps and prevent unauthorized access. The App Lock password is required to open locked apps. For more information, see Encrypting apps.

Managing data usage: Use the data management feature in Phone Manager to keep track of your mobile data usage. Mobile data will be automatically disabled when you exceed the preset limit to prevent you from incurring excessive data charges. For more information, see Managing data usage.

Virus scanner: Use the virus scanner in Phone Manager to remove malware. For more information, see Virus scanner.

Questions about your Huawei Mate 10? Post in the comments!
Huawei Mate 10 Manual [PDF]

Personal Information and Data Security – Huawei Mate 10

Personal Information and Data Security

The use of some functions or third-party applications on your device could result in your personal information and data being lost or becoming  accessible to others. Use the following measures to help you protect your personal information:

– Put your device in a safe place to prevent unauthorized use.

– Set your device screen to lock and set a password or unlock pattern.

– Periodically back up personal information stored on your SIM card, memory card, or your device memory. If you change to a different device, be sure to move or delete any personal information on your old device.

– Periodically back up personal information stored on your memory card, or your device memory. If you change to a different device, be sure to move or delete any personal information on your old device.

– Do not open messages or emails from strangers to prevent your device from becoming infected with a virus.

–  When using your device to browse the Internet, do not visit websites that might pose a security risk to avoid your personal information from being stolen.

– If you use services such as the portable Wi-Fi hotspot or Bluetooth, set passwords for these services to prevent unauthorized access. Turn these services off when they are not in use.

–  Install device security software and regularly scan for viruses.

– Be sure to obtain third-party applications from a legitimate source. Downloaded third-party applications should be scanned for viruses.

– Install security software or patches released by Huawei or authorized third-party application providers.

–  Using unauthorized third-party software to update your device may damage your device or put your personal information at risk. It is  recommended that you update through your device’s online update feature or download official update packages for your device model from Huawei.

– Some applications require and transmit location information. As a result, a third-party may be able to share your location information.

– Some third-party application providers may collect detection and diagnostic information on your device to improve their products and services.

Questions about your Huawei Mate 10? Post in the comments!
Huawei Mate 10 Manual [PDF]

Accessibility Features – Huawei Mate 10

Accessibility Features

Enabling TalkBack
TalkBack provides audible prompts and captions to help visually impaired users. When TalkBack is enabled, your device will issue audible prompts for all content that you touch, select, or enable.

ifAudible prompts are not available for all languages. If your language is not available, you can download a third-party speech synthesis engine. For more information, see Text To Speech (TTS) output.

1. Open  Setting Settings.
2. Touch Advanced settings > Accessibility > TalkBack.
3. Switch on TalkBack and touch OK.

ifA tutorial will be played when you enable TalkBack for the first time. To replay the tutorial, touch settings to access TalkBack Settings, and then select the tutorial.

4.  Touch  settingsand switch on Explore by touch.

ifWhen Explore by touch is enabled, your device will issue audible prompts for content that you touch.

Disable TalkBack: Press the power button until your device vibrates, and then touch and hold the screen with two fingers for more than 3 seconds.

Using TalkBack to control your device

After you have enabled TalkBack, use gestures to:
Browse the screen: Swipe up or down with two fingers to scroll through menu lists. Swipe left or right to move between screens.

control your device -1

control your device-2

Select an item: Touch an item with one finger to select it (it will not open). Your device will read out the content of the selected item.
Select an item

Open an item: Double touch any part of the screen using one finger to confirm your selection from the previous step.

Open an item
For example, if you want to open Settings, touch the Settings icon once using one finger, and then touch twice on any part of the screen.

Configuring the TalkBack settings

1. Open Setting Settings.
2. Touch Advanced settings > Accessibility > TalkBack > settings .
3. Follow the onscreen instructions to adjust the feedback volume, audible feedback settings, control gestures, and more.

Text To Speech (TTS) output
This feature converts text into speech for visually impaired users. Text To Speech (TTS) output requires TalkBack to be enabled.

1. Open Setting  Settings.
2. Touch Advanced settings > Accessibility. Switch on Text-to-speech output, and then select the desired speech synthesis engine and voice speed.

Color correction
Color correction mode adjusts colors to make it easier for color vision impaired users to distinguish between different parts of the screen.

ifEnable this mode with caution, as it may affect your device’s performance.

1. Open  Setting Settings.
2. Touch Advanced settings > Accessibility > Color correction, and switch on Color correction.
3. Touch Correction mode, and select the desired color correction mode.

Viewing Product Information – Huawei Mate 10

Viewing Product Information

Renaming your device
Rename your device to make it easier to find when connecting other devices to your portable Wi-Fi hotspot, or when pairing other devices over Bluetooth.
1. Open Setting  Settings.
2. Touch About phone > Device name and rename your device.

Viewing your model number and version information
View your model number and system version information.
1. Open Setting  Settings.
2. Touch About phone to view your model number, Build number, EMUI version, and Android version.

Viewing your IMEI
All devices have a unique 15-digit IMEI that you can use to verify if your device is genuine.
1. Open  Setting Settings.
2. Touch About phone to view the IMEI.

ifDual-SIM devices have two IMEIs.

Viewing your device’s specifications
View your device’s specifications using a few simple steps. You can view information about your processor, memory, screen resolution, and more.
1. Open Setting Settings.
2. Touch About phone. Swipe up or down on the screen to view information about the processor, RAM, internal storage, screen resolution, and more.

 

Questions about your Huawei Mate 10? Post in the comments!
Huawei Mate 10 Manual [PDF]