CS9030B BLE to DALI Ceiling Mounted AC PIR Sensor with 10A Relay
Product Specifications
- Product Name: Casambi BLE to DALI Ceiling
Mounted AC PIR Sensor with 10A Relay - Input: L (Black, 18 AWG), N (White, 18
AWG) - Output: L1 (Red, 18 AWG), DA (Blue, 22 AWG),
DA (Yellow) (Pink, 22 AWG) - Operating Voltage: 100-277VAC 50/60Hz
- Standby Power: Relay
Product Description
The ceiling mounted sensor combines presence sensing, daylight
harvesting, DALI dimming, and Casambi radio technology. It works
with DALI LED drivers or luminaires that are connected to mains
power. This sensor enhances occupant comfort and provides
significant energy savings to meet building energy codes. Ideal for
low bay applications requiring sensor-based automation.
Casambi Technology Explanation
Casambi technology offers a mesh network where system
intelligence is distributed across all nodes, eliminating single
points of failure. This architecture allows any unit to go offline
and synchronize with others when back online.
Wireless Features
The sensor utilizes wireless technology for seamless integration
and communication within the network.
Product Data Input & Output Characteristics
Operating voltage: 100-277VAC 50/60Hz
Standby power: Relay
Product Usage Instructions
Installation
- Ensure power is turned off before installation.
- Connect the input wires (L and N) as per the provided
instructions. - Connect the output wires (L1, DA, DA Yellow) to the appropriate
fixtures or drivers. - Mount the sensor on the ceiling in a suitable location for
optimal coverage. - Turn on the power and follow the setup instructions for
configuring the sensor.
Configuration
Follow the manufacturer’s guidelines for configuring the sensor
settings using the Casambi app or control system.
Operation
The sensor will automatically detect presence and adjust
lighting levels accordingly. Monitor energy savings and adjust
settings as needed for optimal performance.
Frequently Asked Questions (FAQ)
Q: Can this sensor work with any type of LED luminaires?
A: The sensor is compatible with DALI LED drivers or luminaires
that can be connected to mains power.
Q: How do I reset the sensor if needed?
A: Refer to the user manual for specific instructions on
resetting the sensor to factory settings.
Casambi BLE to DALI Ceiling Mounted AC PIR Sensor with 10A Relay
Important: Read All Instructions Prior to Installation Function introduction
L (Input) : Black, 18 AWG ; N (Input) : White, 18 AWG L1(Output) : Red, 18 AWG DA (Output) : Blue, 22 AWG DA (Yellow) : Pink, 22 AWG
Product Description
The ceiling mounted sensor combines presence sensing, daylight harvesting, DALI dimming and Casambi radio technology. The sensor can work with DALI LED drivers or luminaires, the luminaires just need to be connected to mains power. The result is increased occupant comfort and significant energy savings that meet the most demanding building energy codes. The sensor is suitable for low bay applications which need sensor based automation.
Casambi Technology Explained
The Casambi technology provides a mesh network where all the intelligence of the system is replicated in every node and, in such a way, creates a system with no single point of failure. In this kind of fully distributed architecture, any unit can go offline and catch up from others when they return back online.
Wireless Features
· Control a large number of fixtures from any point · Simple to use UI · Wide range of functionality Grouping Luminaires, different lighting situations for different occasions, colour temperature, daylight sensor, occupancy sensor and much more.
Product Data Input & Output Characteristics
Operating voltage Standby power Relay
100-277VAC 50/60Hz <0.5W
Max. 10A, 100-277V, For general use/resistive load
Mechanical Data Dimension Material
Protection Class
Safety & EMC EMC standard(EMC) Safety standard(LVD) RED Certification
Wireless Communication Transceiver Frequency Radio Range Radio Certification
Lighting Control
Features
111.3*70.4mm Flame-retarant/ABS
ClassII
EN55015, EN61000, EN61547 EN60669-1, EN60669-2-1, AS/NZS60669-1/-2-1
En300328, EN301489-1/-17 ENEC, CE, RED, UL
2.4GHz ISM band 164 feet (50m) in open field
FCC/IC, CE
DALI broadcast, Scene control Autonomous sensor-based control, Scheduler control
Sensing Movement detection Installation
Max. 10-12m @3m height 2-6m, max. 6m
Connectors Terminal block/Wire size Wire strip length
AC Line: 18AWG, Signal Line: 22AWG 10mm
Environment
Operating Temperature Range IP rating
Key Features · PIR motion detection · Daylight harvesting · Works with DALI drivers or luminaires, broadcast control · Autonomous sensor-based control · Can be use for indoor applications
Benefits
· Cost-effective solution for energy savings · Energy code compliance · Robust mesh network
Ta: -10 to +50
IP20
Applications · Open offices · Individual offices · Conference rooms · Classrooms · Retail stores · Hospitals · Lobbies
Warnings
· DO NOT install with power applied to device. · DO NOT expose the device to moisture.
Detection Pattern
Coverage Side View
0m
1m
2m
3m
5m
3m
1m
0
1m
3m
5m
The detection area for movement sensor can be roughly divided into two parts: Slow movement (person moving < 1.0’/s or 0.3m/s) Quick movement (person moving > 1.3’/s or 0.4m/s)
Coverage Top View 6m
4m
2m
1m
0
12m
1m
2m
4m
6m 6m 4m 2m 1m 0 1m 2m 4m 6m
Default sensitivity: 80% (9m at 3m height)
3 m
3 m
Place/Detection instruction
< 2 m
< 1 m
W
4m 2m 0m 2m 4m
With Corridor Lens Mask: 4-5m at 3m height
4m 2m 0m 2m 4m
With Semi-Circular Mask: Half-detection pattern
Detection Area
Note: 1) Following different detection areas are based on different installation heights & patterns. 2) Detection Pattern is a relevant value, the performance should depends on the site conditions(installation height/ temperature/ sunlight/ humidity/ Blind area…etc)
Low-bay lens detection pattern at 3m
High-bay lens detection pattern at 12m
Application
1
2
1. Power up the sensor. The load should 2. Vacate the room or remain very still
come on immediately.
and wait for the load to switch off .
Aisle/Corridor application: Split the lens cover into aisle type.
3
3. Enter the room or make some movement and check that the load switches on.
PRECAUTIONS
· Do not place the SENSOR near heat sources, fans or in ventilated ceiling voids.
· Do not place close to, or positioned such that, any light source points directly into the SENSOR.
· Ensure wires and cables are securely held within the connection terminals.
· Disconnect the SENSOR from the circuit before performing insulation testing of the wiring circuit.
Semi-sphere application: Split the lens cover into Semi-circle type.
Product Dimension
40 36.2
111.3
Wiring Diagram LN
Lens mask: Free to manage detection pattern
N(Input/Output
L(Input L1(Output DA(Output) DA(Output)
·ACL ·ACN ·DA ·DA
DALI Driver
·LED+ ·LED-
·ACL ·ACN ·DA ·DA
DALI Driver
·LED+ ·LED-
Installation Precautions
· Avoid areas with frequent temperature changes: Keep away from air conditioners, fans, refrigerators, ovens, and other objects that cause rapid temperature changes. The detection effectiveness of PIR motion sensors is closely related to temperature fluctuations, and vents or heat sources can lead to false alarms.
· Avoid areas with significant air flow. · Avoid facing glass doors and windows directly: 1) Do not face glass doors and windows directly to avoid
interference from strong light. 2) Avoid complex environments outside doors and windows, such as direct sunlight, crowds, and moving vehicles. · Avoid installing opposite large, constantly moving objects: Large objects with significant motion can cause sudden changes in airflow within the detection area, leading to false alarms. Outdoor PIR motion sensors should not be installed opposite large trees or tall bushes. · Avoid areas with screens, furniture, large potted plants, or other obstacles within the detection range. · Avoid areas exposed to direct sunlight.
Documents / Resources
 | CASAMBI CS9030B BLE to DALI Ceiling Mounted AC PIR Sensor with 10A Relay [pdf] Instruction Manual PIR, 10AD, CS9030B BLE to DALI Ceiling Mounted AC PIR Sensor with 10A Relay, CS9030B, BLE to DALI Ceiling Mounted AC PIR Sensor with 10A Relay, DALI Ceiling Mounted AC PIR Sensor with 10A Relay, Ceiling Mounted AC PIR Sensor with 10A Relay, Mounted AC PIR Sensor with 10A Relay, AC PIR Sensor with 10A Relay, PIR Sensor with 10A Relay, Sensor with 10A Relay, 10A Relay, Relay, Sensor |