Orbe Smart Lock
User Manual

Orbe Smart Lock

Special attention:

• mechanical eys lease eep outdoor, ust n use eys rock doors.
• lease replace or he battery hen ow wattage alarm.
• reading his manual carefully before installation, and keeping t or future reference.

Introduction

1.1.Adjust the cylinder to perfectly matches your door and escutcheon.

As shown in the figure: the door thickness is 30mm, and the panel thickness is 15mm,The distance of each compartment on the lock core is 5mm

1. Total thickness(distance from cylinder hole center to front panel)
2. Total thickness(distance from cylinder hole center to back panel)

1.2.Packing List
Check the following drawing to check whether the package contains all the parts

1.3.Specifications

System Initialization

Open the cover plate of the front panel, long press the “Reset” button on the back panel for 5s, press “000#”, and the initialization is complete

Installation Diagram

Step 1 Adjust the cylinder	Step 2 Install Screw for Cylinder
	An old lock installed at a distance greater than 50MM from the square shaft to the door
Step 3 Install Indoor knob	Step 4 Installation completed
Step 5 Install the battery
1. Insert the key and rotate counterclockwise to unlock 2. Remove the digital button panel 3. Install batteries 4. Take the M1.5*5mm hex screw out of the fitting bag and tighten it clockwise ( First installation does not require removal of panel screws）

Operation

3.1.Registration
The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play, Yingyongbao, Baidu, Ali, 360, Huawei, and Xiaomi.

http://a.app.qq.com/o/simple.jsp?pkgname=com.tongtongsuo.app&fromcase=40003

3.2. Connect the lock to the phone

1. please scan the QR code to download the app
2. You can also search for TTLock in the APP store(Google Play)to download
3. Register a new account (phone number or email) or login with an existing account.
4. Touch the lock screen to light, click “+ Add Lock”
5. The lock nearby will appear on the phone screen, Click “+”
6. Re-name the lock
7. The lock was added successfully

TTlock users can register the account by mobile phone and Email which currently support 200 countries and regions in the world. The verification code will be sent to the user’s mobile phone or email, and the registration will be successful after the verification.

3.3.Add locks
TTLock supports multiple types of lock devices. The lock needs to be added by the app after entering the add mode. Generally, a lock that has not been added, as long as the lock keyboard is touched, it will enter the add mode. The default password is 123456 if not added by the phone

3.4.User Management
3.4.1. Bluetooth management
Make sure there is no problem with Bluetooth communication. After connecting the phone to the door lock as above, Click “ “to unlock.(the phone is within 5 meters from the door lock)
3.4.2. Setting Passcode
Passcodes are also a way to unlock. After entering the passcode on the locked keyboard, press the unlock button in the lower right corner to unlock. Passcodes are divided into
permanent, time-limited, single, clear, cycle, and custom.(You can share the Passcode with another user via WeChat、SMS、Email、Messenger、WhatsApp)

3.4.3. Send e-Key
Click on the ” ” as shown in the figure, and you can send the eKey to other users of TTlock to authorize the unlock(the receiver must download the APP and set up an account)→ Select the e-key format (Timed, permanent, One-time, Recurring) → Enter the recipient’s account of TTlock, set the name and effective time of the key, Can choose to allow remote unlocking or disallowing, authorized administrator or not authorized, as shown in figure →Send→The recipient’s account has Bluetooth unlock permission

3.4.4.Add card
Supports opening doors through various IC cards. Before an IC card is used to open the door, it needs to be added first. The adding process needs to be performed by the app besides the lock. The validity period of the IC can be set, it can be permanent, or it can be limited in time.

3.4.5. Add fingerprint
The premise that a fingerprint can be used to open a door is that it needs to be added first. The adding process needs to be performed by the APP beside the lock. The fingerprint expiration data can be set, it can be permanent, or it can be limited. After setting, you can modify its validity period.

3.4.6. e-Key management
Click “ “ The manager can delete the key, reset the key, send, and adjust the Okay, meanwhile he can search the lock record.
3.4.7. Passcode management
Click “ ” .All generated passwords can be viewed and managed in the password management module. This includes a password change, password deletion, password reset, and password unlock record.
3.4.8.Unlock records
Click ” “you can query your unlock record as shown in figure

3.5. Gateway management(Optional)
The TT lock is directly connected via Bluetooth, which is why it is not attacked by the network. The gateway is a bridge between smart locks and home WIFI networks. Through the gateway, the user can remotely view and calibrate the lock clock, and read the unlock record. Meanwhile, it can remotely delete and modify the password.
3.5.1. Add Gateway
Lights Status

Pair the Getaway With App 3.5.2. Manual
After a short period of time, you can see which locks are in their coverage in the app. Once the lock is bound to the gateway, the lock can be managed through the gateway

FAQ

Guarantee

Customer Name: ……………………
Customer Calls：……………………..
Purchase Date: …………………………
Product Name: …………………………
Product Model: ……………………………
Note:

1. Please keep this card so that you can use it when you need warranty service.
2. We provide you with a one-year warranty from the date of purchase.
3. This warranty service is valid for customers in any country in the world.
   

Documents / Resources

CARD Orbe Smart Lock [pdf] User Manual Orbe Smart Lock, Orbe, Smart Lock, Lock

References

• User Manual