Assembly Instructions: Vibe & Dine 7-Drawer Dresser with LED Lights

Product Overview

This document provides detailed instructions for assembling the Vibe & Dine 7-Drawer Dresser, a farmhouse-style dresser featuring rustic wooden construction and integrated Bluetooth LED strip lights. Please review all instructions and parts before beginning assembly.

Parts List

Hardware List

Assembly Steps

Step 1: Assemble Drawer Boxes (x3)

Attach drawer sides (5, 6) to drawer back (7) using screws (D) and Allen wrench (Q). Slide drawer bottom (8) into the grooves. Attach drawer front (4) using cam bolts (A) and cam locks (B).

Step 2: Assemble Drawer Boxes (x3)

Repeat Step 1 for the remaining two drawer boxes.

Step 3: Attach Drawer Slides to Drawer Boxes

Attach inner drawer slides (11, 14) to the sides of the assembled drawer boxes using screws (A) and Allen wrench (Q). Ensure correct orientation (left/right).

Step 4: Attach Drawer Slides to Dresser Frame

Attach outer drawer slides (12, 13, 15, 16) to the inside of the dresser frame panels (17, 18, 19, 20) using cam bolts (B) and cam locks (B). Ensure correct alignment and spacing.

Step 5: Assemble Dresser Frame

Connect the side panels (2, 3) to the top panel (1) and bottom panel (not explicitly numbered but implied) using cam bolts (A) and cam locks (B). Attach back panels (9, 24) using screws (C).

Step 6: Install Drawer Slides on Frame

Attach the outer drawer slide rails (CL, CR, DL, DR) to the inside of the dresser frame using screws (E).

Step 7: Assemble Drawer Supports

Assemble drawer supports (17, 18, 19, 20, 21, 22, 23) as shown in the diagrams, using appropriate hardware.

Step 8: Attach Handles to Drawer Fronts

Attach handles (J) to the drawer fronts (4) using screws (L) and cam bolts (A).

Step 9: Insert Drawers into Frame

Carefully slide the assembled drawers into the corresponding drawer slides on the dresser frame.

Step 10: Attach Top Panel and Final Assembly

Secure the top panel (1) to the dresser frame. Attach any remaining back panels or supports.

Step 11: Install LED Strip Lights

Attach the LED strip light (25) to the desired location on the dresser using the provided clips (N) and cable ties (O). Connect the LED strip to the power adapter and remote control (M).

Step 12: Wall Anchoring

For safety, it is recommended to anchor the dresser to the wall using the provided hardware (O) and following the instructions in Step 28 and 29.

Step 13: Final Check

Ensure all screws are tightened and all parts are securely in place. Test the drawers and the LED lighting system.

Bluetooth LED Strip Lights Operation

Use the included remote control (M) to power the LED lights on/off, change colors, adjust brightness, and set various lighting modes. Refer to the separate user manual for detailed operation instructions.

Safety Information

Warning: To prevent tip-over, this furniture must be secured to the wall with the anti-tip device provided. Follow the wall anchoring instructions carefully.

Keep small parts away from children during assembly.