JBL Stage3 Gen2 68CF 6.5-inch 2-Way Component Car Speakers User Manual

1. Producte acabatview

El JBL Stage3 Gen2 68CF 6.5-inch 2-Way Component Car Speakers are engineered to deliver high-quality audio performance in your vehicle. This component system includes woofers, tweeters, and external crossovers, designed for a balanced and dynamic sound experience.

Característiques clau

• Patented Plus One Woofer Cone: Features a larger cone surface area for higher sensitivity and deeper bass.
• Glass Fiber Reinforced Cone: Infused with 10% glass fiber and laser-etched for structural rigidity, producing powerful, resonant bass.
• Edge-Driven Silk Dome Tweeter: Provides a broader, smoother high-frequency response without distortion, even at high volumes.
• True 4-Ohm Impedance Design: Maximizes power output from your head unit or amplifier by compensating for system resistance.
• Complete Component Kit: Includes two woofers, two silk dome tweeters, and two inline crossovers for a comprehensive audio upgrade.

Responsabilitat Ambiental

JBL is committed to environmental sustainability. The Stage3 Gen2 speakers incorporate post-consumer recycled plastic materials and PVC-free wiring. The packaging utilizes soy-based inks, reflecting a dedication to environmentally conscious innovation.

Figura 1: Frontal view de la JBL Stage3 Gen2 68CF 6.5-inch woofer, showcasing its carbon fiber camouflage cone design and JBL logo.

Figure 2: An illustrative image highlighting the JBL Stage3 Gen2 68CF speaker's key features, including powerful sound, upgrade potential, and separate tweeters for clearer audio.

2. Què hi ha a la caixa

Desembaleu amb cura el contingut i assegureu-vos que hi hagi tots els elements:

• 2x Speakers (Woofers)
• 2x 0.75-inch Tweeters
• 2x Threaded Flush-mount Adapters for tweeters
• 2x Plastic Locking Nuts for tweeters
• 2x Crossover Boxes
• 8x Screws for mounting
• 8x Spade Clips for connections
• 1x Mini Owner's Manual (OM)
• 2x Foam Gaskets
• 2x Logo Badges

Figura 3: Un primer pla view of the JBL silk dome tweeter, featuring a protective grille and the JBL logo, designed for clear high-frequency sound reproduction.

Figure 4: The JBL crossover box, which separates audio frequencies for optimal delivery to the woofer and tweeter, ensuring clear and balanced sound.

3. Configuració i instal·lació

Professional installation is recommended. If performing a DIY installation, follow these guidelines carefully.

3.1 Informació de seguretat

• Desconnecteu sempre el terminal negatiu de la bateria del vehicle abans de començar qualsevol treball elèctric per evitar curtcircuits i danys.
• Utilitzeu equips de seguretat adequats, inclosa la protecció ocular.
• Ensure all wiring is properly insulated and secured to prevent chafing or damage.

3.2 Eines necessàries

• Tornavisos (Phillips i cap pla)
• Pelafils/enganxadores
• Perforar (si calen nous forats de muntatge)
• Cinta mètrica
• Eines d'eliminació de panells
• Cinta elèctrica o tub termoretractable

3.3 Speaker Placement and Fitment

Before installation, measure your vehicle's speaker openings and mounting depth to ensure compatibility. The JBL Stage3 Gen2 68CF speakers are designed for 6.5-inch (165mm) cutouts.

Figure 5: A detailed guide on how to measure for car speaker fitment, including cone diameter, mounting depth, and outer diameter, to ensure proper installation.

Figure 6: Technical diagram showing the precise dimensions of the JBL Stage3 68CF woofer and tweeter, essential for accurate installation and fitment.

3.4 Instruccions de muntatge

1. Accés a la ubicació de l'altaveu: Carefully remove door panels or other trim to access the factory speaker locations.
2. Elimina els altaveus antics: Disconnect and remove any existing speakers.
3. Mount Woofers: Place the new JBL woofers into the speaker openings. Use the provided screws to secure them firmly. Ensure the foam gasket is used for a tight seal.
4. Mount Tweeters: The tweeters can be flush-mounted or surface-mounted. Choose the appropriate adapter and secure them in your desired location (e.g., dashboard, door pillar).
5. Install Crossovers: Find a secure, dry location for the crossover boxes, away from moisture and excessive heat.

Figure 7: The JBL Stage3 Gen2 6.5-inch woofer professionally installed within a car door panel, demonstrating proper fit and wiring connections.

Figure 8: A JBL tweeter seamlessly integrated into a car's door panel, illustrating a clean and functional installation.

3.5 Esquema de cablejat

Connect the speakers to the crossovers, and then the crossovers to your head unit or amplifier. Refer to the diagram below for typical connections. Ensure correct polarity (+/-) for all connections.

1. Connecteu el ENTRADA terminals of the crossover to the speaker output of your head unit or ampmés viu.
2. Connecteu el WF (Woofer) terminals of the crossover to the JBL 6.5-inch woofer.
3. Connecteu el TW (Tweeter) terminals of the crossover to the JBL 0.75-inch tweeter.
4. Secure all connections using spade clips or by soldering and insulating with electrical tape or heat shrink tubing.

Nota: Specific wiring colors may vary. Always match positive (+) to positive (+) and negative (-) to negative (-).

4. Funcionament

4.1 Engegada inicial

After installation, reconnect the car battery. Turn on your car's audio system. Start with the volume low and gradually increase it to ensure all speakers are functioning correctly and without distortion.

4.2 Configuració d'àudio

• Balanç i atenuador: Adjust these settings on your head unit to ensure sound is evenly distributed throughout the vehicle.
• Equalitzador (EQ): Use your head unit's equalizer to fine-tune the sound to your preference. Start with a flat EQ and make small adjustments.
• Configuració de guany: Si s'utilitza un extern amplifier, ensure the gain is set correctly to prevent clipping and speaker damage. Consult your amplifier's manual for proper gain adjustment procedures.

4.3 Període de rodatge

Allow a break-in period of approximately 20-30 hours of normal listening at moderate volumes. This allows the speaker components to loosen up and achieve their optimal sound performance.

5. Manteniment

5.1 Neteja

To maintain the appearance and performance of your speakers, periodically wipe them with a soft, dry cloth. Avoid using harsh chemicals, abrasives, or excessive moisture, which can damage the speaker cones or grilles.

5.2 Inspecció

Occasionally inspect the speaker connections and mounting hardware to ensure they remain secure. Loose connections can lead to poor sound quality or intermittent audio.

6. Solució De Problemes

Si teniu problemes amb el vostre JBL Stage3 Gen2 68CF speakers, refer to the following common problems and solutions:

7. Especificacions

Especificacions tècniques detallades per al JBL Stage3 Gen2 68CF 6.5-inch 2-Way Component Car Speakers:

Figure 9: The JBL Stage3 Gen2 68CF speaker with key specifications such as RMS power, maximum power, frequency response, sensitivity, and impedance clearly displayed.

8. Garantia i Suport

8.1 Informació de la garantia

JBL products are designed for durability and performance. This product typically comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official JBL website. The EU Spare Part Availability Duration is 2 years.

8.2 Atenció al client

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact JBL customer support. You can find contact information on the official JBL weblloc web o a través del vostre distribuïdor autoritzat.

Visita el Botiga JBL a Amazon per a més informació.