ProSelect SL11NP Digital Non-Programmable Thermostat

Producte acabatview

The ProSelect SL11NP is a digital non-programmable thermostat designed for straightforward temperature control. It features a large 2 square inch backlit display for easy readability and adjustment. This thermostat is hardwired with a battery backup, ensuring continuous operation even during power outages. All settings are retained in permanent memory, preventing loss of configuration.

Key features include short cycle protection to safeguard your AC compressor, a low battery indicator, and a switchable Fahrenheit/Celsius display. It is compatible with both electric and gas fan systems, with a built-in toggle switch for selection.

This image displays the front of the ProSelect SL11NP thermostat, featuring its large backlit digital display. The display shows the current room temperature, the set temperature, and indicators for system and fan modes. Below the display are the system mode switch (COOL, OFF, HEAT) and the fan mode switch (AUTO, ON). To the right of the display are the up and down arrow buttons for temperature adjustment, and a 'RESET' button is located on the left.

Configuració i instal·lació

This thermostat is designed for hardwired installation and includes a battery backup for reliable operation. Professional installation is recommended to ensure proper wiring and functionality.

Configuració Inicial

• Interruptor Fahrenheit/Celsius: Locate the Fahrenheit/Celsius switch, typically found on the back or inside the thermostat cover. Set it to your preferred temperature format (°F or °C) before mounting.
• Fan System Compatibility: The thermostat includes a built-in switch to toggle compatibility between electric and gas fan systems. Ensure this switch is set correctly for your HVAC system type.

Instruccions de funcionament

Pantalla i controls

• Pantalla retroil·luminada: The large 2 square inch display illuminates to show current room temperature and set temperature, making it easy to read in various lighting conditions.
• Ajust de temperatura: Utilitza el Up i Avall botons de fletxa situats al costat dret del termòstat per augmentar o disminuir la temperatura desitjada.
• System Mode Switch: Below the display, slide the system switch to select your desired operating mode:
  • GUAI: Activa el sistema de refrigeració.
  • DESACTIVAT: Apaga tant els sistemes de calefacció com els de refrigeració.
  • CALOR: Activa el sistema de calefacció.
• Interruptor de mode de ventilador: Below the display, slide the fan switch to select the fan operation:
  • AUTOMÀTIC: El ventilador només funciona quan el sistema de calefacció o refrigeració està actiu.
  • ACTIVITAT: El ventilador funciona contínuament, independentment de l'activitat del sistema de calefacció o refrigeració.
• Botó de reset: A small recessed button labeled 'RESET' is located on the left side. Pressing this button will reset the thermostat to its factory default settings.

Característiques de protecció

• Short Cycle Protection: This feature prevents damage to your AC compressor by ensuring a minimum off-time between cooling cycles.
• Indicador de bateria baixa: The display will show an indicator when the battery needs to be changed, ensuring continuous operation of the thermostat's memory and display functions during power outages.

Manteniment

• Substitució de la bateria: When the low battery indicator appears on the display, replace the backup batteries promptly. Refer to the installation guide for specific battery type and replacement procedure.
• Neteja: Per netejar el termòstat, netegeu suaument l'exterior amb un drap suau i sec.amp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components interns.

Resolució de problemes

If you encounter issues with your ProSelect SL11NP thermostat, consider the following common solutions:

• La pantalla està en blanc:
  • Check if the thermostat is receiving power from the hardwired connection.
  • Ensure the backup batteries are correctly installed and not depleted. Replace if necessary.
• Calefacció/Refrigeració no activable:
  • Verify that the system mode switch is set to CALOR or GENIAL, no OFF.
  • Check that the set temperature is appropriate for activating the system (e.g., set temperature below room temperature for cooling, above for heating).
  • Ensure the fan mode is set to AUTO or ON.
  • Allow for short cycle protection delay if the system recently turned off.
• Lectura de temperatura incorrecta:
  • Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources that could affect its temperature sensor.
  • Verify the Fahrenheit/Celsius switch is set to your desired unit.
• Settings Lost After Power Outage:
  • The thermostat is designed to retain settings in permanent memory. If settings are lost, ensure the backup batteries are functional and properly installed.

Si els problemes persisteixen després d'intentar aquests passos, poseu-vos en contacte amb l'atenció al client.

Especificacions

Informació de la garantia

The ProSelect SL11NP Digital Non-Programmable Thermostat comes with a Garantia limitada d'5 any for the original owner. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the documentation included with your product or contact ProSelect customer support.

Atenció al client

If you require further assistance, have questions about your thermostat, or need to report an issue, please contact ProSelect customer support. Have your model number (PSTSL11NP) and purchase information ready when contacting support.

For the most up-to-date contact information, please visit the official ProSelect weblloc web o consulteu l'embalatge del producte.