Atmosphera Jily Pendant Lamp D48 cm User Manual

1. Introducció i informació de seguretat

Thank you for choosing the Atmosphera Jily Pendant Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Advertències importants de seguretat:

• Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
• Installation must be performed by a qualified electrician or a competent person in accordance with local electrical codes.
• Securely fasten the pendant lamp to the ceiling using appropriate and robust mounting hardware suitable for the ceiling material.
• Eviteu exposar la lamp to moisture or direct water contact to prevent damage and electrical hazards.
• No supereu la potència màximatage specified for the light bulb (40W).
• Ensure the light bulb is fully cooled before attempting to replace it.

2. Què hi ha a la caixa

Carefully unpack the contents and ensure all items are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• 1 x Jily Pendant Lamp Assembly (including shade, cable, and ceiling canopy)

Note: Light bulb (E27, max 40W) and mounting hardware for the ceiling are not included and must be purchased separately.

3. Configuració i instal·lació

This section outlines the general steps for installing your pendant lamp. Always refer to the safety warnings in Section 1 before beginning.

Eines necessàries (no incloses):

• Tornavís (Phillips i/o de punta plana)
• Pelafils
• Drill (if required for ceiling mounting)
• Llapis
• Escala
• Voltage Tester

Passos d'instal·lació:

1. Apagueu l'alimentació: Locate the main circuit breaker and turn off the power to the circuit where you will be installing the lamp. Verify the power is off using a voltage provador.
2. Prepara el sostre: If replacing an existing fixture, carefully remove it. Ensure the ceiling junction box is secure and capable of supporting the lamp's weight (approximately 1.08 kg).
3. Mount Ceiling Canopy Bracket: Attach the mounting bracket (usually included with the lamp, inside the canopy) to the ceiling junction box using appropriate screws. Ensure it is firmly secured.
4. Ajustar la longitud del cable: The cable length is approximately 90 cm. Adjust the cable to your desired hanging height by feeding it through the ceiling canopy. Secure the cable at the desired length using the provided strain relief mechanism within the canopy.
5. Connexions de cable: Connecteu els cables elèctrics de la lamp to the corresponding wires from the ceiling. Typically, connect live (brown/black) to live, neutral (blue) to neutral, and ground (green/yellow) to ground. Use appropriate wire connectors. Ensure all connections are secure.
6. Attach Ceiling Canopy: Carefully push the ceiling canopy up against the ceiling, covering the wiring. Secure it to the mounting bracket using the screws provided.
7. Instal·lar la bombeta: Screw an E27 base light bulb (max 40W, not included) into the lamp titular. No apretar massa.
8. Restaura l'alimentació: Torneu a connectar l'alimentació a l'interruptor principal.
9. Prova Lamp: Turn on the light switch to ensure the lamp funcioni correctament.

Image: Detail of the ceiling canopy, showing the connection point to the ceiling.

Image: The Jily pendant lamp, espectacleasing its full design and illuminated bulb.

4. Instruccions de funcionament

The Atmosphera Jily Pendant Lamp està dissenyat per a un funcionament senzill.

• Activació/desactivació: Controla la lamp using a standard wall light switch connected to the circuit.
• Bombeta: This fixture uses one E27 base light bulb. For optimal performance and light quality, choose a bulb that suits your preference (e.g., LED, incandescent, warm white).

Image: The Jily pendant lamp installed in a living space, demonstrating its aesthetic and light output.

5. Manteniment

Regular maintenance will help preserve the appearance and functionality of your pendant lamp.

Neteja:

• Pols: Regularly use a soft, dry duster or a microfiber cloth to gently remove dust from the lampshade and other surfaces.
• Neteja de punts: Per a marques difícils, esbandiu lleugeramentampen a cloth with water (do not use harsh chemicals or abrasive cleaners) and gently wipe the affected area. Avoid excessive moisture, especially on the paper shade.

Substitució de bombetes:

1. Apagueu l'alimentació: Desconnecteu sempre l'alimentació de l'aparell.amp at the main circuit breaker and the wall switch before replacing the bulb.
2. Deixeu refredar: Ensure the old bulb has completely cooled down before touching it.
3. Traieu la bombeta antiga: Carefully unscrew the old E27 bulb counter-clockwise.
4. Instal·lar una bombeta nova: Enrosqueu una bombeta E27 nova (màxim 40 W) en sentit horari fins que estigui ajustada. No l'estrengueu massa.
5. Restaura l'alimentació: Turn the power back on and test the new bulb.

Imatge: Detallada view of the paper and iron lampshade material.

6. Solució De Problemes

If you encounter issues with your pendant lamp, consulteu els problemes i solucions habituals següents:

If the problem persists after attempting these solutions, please contact a qualified electrician or customer support.

7. Especificacions

8. Garantia i Suport

Specific warranty information for the Atmosphera Jily Pendant Lamp may vary by region and retailer. Please refer to your purchase documentation or contact the retailer where you purchased the product for details regarding warranty coverage.

For technical support, missing parts, or further assistance, please contact the customer service department of ATMOSPHERA CREATEUR D'INTERIEUR or your retailer.

When contacting support, please have your model name (Jily) and model number (3560232579516) available.