Casio Wave Ceptor Illuminator Multi Band Watch WV-200R-5ACF User Manual

Introducció

This manual provides detailed instructions for the operation and maintenance of your Casio Wave Ceptor Illuminator Multi Band Watch, model WV-200R-5ACF. Please read this manual carefully to ensure proper use and to fully utilize all features of your watch.

Image: Casio Wave Ceptor Illuminator Multi Band Watch WV-200R-5ACF Beige. This image displays the watch face and strap, highlighting its digital display and overall design.

Configuració

1. Initial Time Setting (Atomic Timekeeping)

Your watch is equipped with Multi Band 6 atomic timekeeping, which automatically receives time calibration signals from six transmission stations around the world. This ensures accurate time display.

• Ensure the watch is exposed to an open area, away from metal objects or electronic devices that may interfere with signal reception.
• The watch will attempt to receive the calibration signal automatically between midnight and 5:00 AM daily.
• To manually initiate reception, refer to the "Time Calibration Signal Reception" section in the detailed module manual (available on the Casio weblloc).

2. Configuració manual de la data i l'hora

If atomic timekeeping is not available or desired, you can set the time and date manually.

1. En el mode de mesura del temps, premeu i manteniu premut el botó AJUSTAR button (usually top-left) until the city code starts flashing.
2. Utilitza el MODE button (usually bottom-left) to cycle through settings: City Code, DST (Daylight Saving Time), 12/24-hour format, Seconds, Hour, Minute, Year, Month, Day.
3. Utilitza el CERCAR i INVERSA buttons (usually top-right and bottom-right) to change the flashing values.
4. Un cop tots els paràmetres siguin correctes, premeu el botó AJUSTAR botó de nou per sortir del mode de configuració.

3. World Time Setup

The watch can display the current time in 29 different time zones (48 cities).

• Enter the World Time Mode by pressing the MODE botó.
• Utilitza el CERCAR i INVERSA buttons to scroll through the available city codes.
• To toggle Daylight Saving Time (DST) for a specific city, press the AJUSTAR mentre es mostra el codi de la ciutat.

Funcionament del rellotge

1. Navegació de modes

Premeu el botó MODE button (bottom-left) to cycle through the different modes:

• Mode d'indicació de l'hora: Mostra l'hora, la data i el dia de la setmana actuals.
• Mode hora mundial: Mostra l'hora actual a diverses ciutats del món.
• Mode d'alarma: Configura fins a 5 alarmes diàries i una horaurly senyal horari.
• Mode de cronòmetre: Measures elapsed time, split times, and two finishes.
• Mode de temporitzador: Countdown timer with a range of 1 minute to 24 hours.

2. Using the Illuminator

The watch features an Illuminator for visibility in low-light conditions.

• Premeu el botó LLUM button (usually top-right or front center) to illuminate the display.
• The illumination duration can be adjusted in the settings.

3. Resistència a l'aigua (200 m)

Your watch is water resistant to 200 meters (20 BAR), making it suitable for swimming, showering, and snorkeling.

• No accioneu els botons mentre el rellotge estigui mullat o submergit.
• Eviteu exposar el rellotge a aigua calenta o vapor, ja que això pot comprometre els segells de resistència a l'aigua.
• Després de l'exposició a l'aigua salada, esbandiu el rellotge amb aigua neta i eixugueu-lo.

Manteniment

1. Neteja del rellotge

Una neteja regular ajuda a mantenir l'aspecte i la longevitat del rellotge.

• Netegeu la caixa i la corretja del rellotge amb un drap suau i sec.
• For resin bands, you can use a mild soap solution and a soft brush, then rinse thoroughly with water and dry.
• Eviteu utilitzar productes químics aggressivs o netejadors abrasius.

2. Substitució de la bateria

The watch is powered by a battery. When the display becomes dim or the watch stops functioning, it may be time for a battery replacement.

• Battery replacement should ideally be performed by an authorized Casio service center to ensure proper sealing and water resistance.
• Intentar substituir la pila tu mateix pot anul·lar la garantia i comprometre la resistència a l'aigua del rellotge.

Resolució de problemes

• Time is incorrect or not syncing:

  Ensure the watch is in an area with good signal reception, away from strong magnetic fields or electronic interference. Verify your home city setting is correct. If automatic reception fails, try manual time setting.

• La pantalla està tènue o en blanc:

  This may indicate a low battery. Contact an authorized service center for battery replacement.

• Els botons no responen:

  Ensure the watch is not in a locked mode (if applicable, refer to the full module manual). If the watch was recently exposed to water, ensure it is completely dry. If the issue persists, seek professional service.

Especificacions

Informació de la garantia

Your Casio WV-200R-5ACF watch comes with a Limited Warranty. The specific terms and duration of the warranty are provided with your purchase in the included "Warranty Information" document.

Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

For detailed warranty terms and conditions, please refer to the official Casio website or the warranty card included in your product packaging.

Suport

For further assistance, detailed module instructions, or service inquiries, please visit the official Casio support weblloc.

• Casio oficial Weblloc: www.casio.com
• Número de mòdul: Refer to the back of your watch or the included manual for the specific module number (e.g., 3134, 3135) to find the exact digital manual.
• Components inclosos: Your product package includes a User Manual and Warranty Information.