ATTOP Mini Drone with Camera User Manual

1. Introducció

Thank you for choosing the ATTOP Mini Drone with 1080P Camera. This manual provides essential information for the safe operation, setup, and maintenance of your drone. Please read it thoroughly before first use and retain it for future reference.

This drone is designed for users aged 14 years and above. Adult supervision is recommended for younger users.

2. Què hi ha a la caixa

Your ATTOP Mini Drone package includes the following components:

• 1 x ATTOP Mini Drone (X-PACK 17)
• 1 comandament a distància de 2.4 G
• 1 x Phone Clamp per al comandament a distància
• 3 x 3.7V 500mAh Rechargeable Batteries (for drone)
• 1 x USB Charging Cable (for drone batteries)
• 4 x Proteccions d'hèlix
• 2 hèlixs de recanvi
• 1 x tornavís
• 1 x Manual d'usuari

Image: All components included in the ATTOP Mini Drone package.

3. Producte acabatview

Familiarize yourself with the main parts of your ATTOP Mini Drone and its remote controller.

Components del drone

• Braços plegables: Per a emmagatzematge compacte i portabilitat.
• 1080P FPV Camera: Captures high-resolution photos and videos with a 90° wide-angle view.
• Hèlixs: Four main propellers for flight.
• Compartiment de la bateria: Located at the rear of the drone.
• Botó d'encesa: On top of the drone.
• Llums LED: Indicate drone status.

Image: The ATTOP Mini Drone in its folded and unfolded states, demonstrating its compact and portable design.

Components del control remot

• Joystick esquerre: Controla l'altitud i la rotació.
• Joystick dret: Controla el moviment endavant/enrere i esquerra/dreta.
• Botó d'encesa: To turn the controller on/off.
• One-Key Take-off/Landing Button: Inicia l'enlairament o l'aterratge automàtic.
• Botó de mode sense cap: Activates headless flight mode.
• 3 Speed Modes Button: Toggles between low, medium, and high speeds.
• Botó de gir de 360°: Performs aerial flips.
• Telèfon Clamp: Attaches to the top of the controller to hold your smartphone for FPV viewing.

4. Càrrega de les bateries

The drone comes with three modular 3.7V 500mAh rechargeable batteries. Ensure all batteries are fully charged before flight.

1. Remove the drone battery from the drone by gently pulling it out from the rear compartment.
2. Connect the drone battery to the USB charging cable.
3. Connecteu el cable de càrrega USB a una font d'alimentació USB (per exemple, un port USB de l'ordinador, un adaptador de paret USB).
4. The indicator light on the USB cable will show charging status (refer to cable's specific indicator behavior).
5. La càrrega sol trigar aproximadament entre 60 i 80 minuts per bateria.
6. Once fully charged, disconnect the battery from the cable.

Image: The three included drone batteries, providing up to 30 minutes of flight time.

5. Configuració del controlador

Instal·lació de les bateries del controlador

El comandament a distància requereix 3 piles AAA (no incloses).

1. Obriu el compartiment de la bateria a la part posterior del comandament a distància.
2. Introduïu 3 piles AAA, assegurant-vos de la polaritat correcta (+/-).
3. Tanqueu el compartiment de la bateria de manera segura.

Attaching Phone Clamp

Slide the phone clamp onto the designated slot on the top of the remote controller until it clicks into place. This allows you to mount your smartphone for FPV viewing.

6. Instal·lació i connexió de l'aplicació

Per a FPV (Primera Persona) View) and advanced control features, download the