Introducció
This manual provides detailed instructions for the safe and effective use of your PAWPRO Dog Training Collar Model PP7-A. Please read this manual thoroughly before operating the device to ensure proper functionality and the well-being of your dog.
Informació important de seguretat
- This training collar is designed for dogs weighing over 4.5 kg (10 lbs) and puppies over 6 months old.
- Do not leave the collar on your dog for more than 12 consecutive hours. Prolonged wear can cause skin irritation.
- Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.
- The static correction feature should be used responsibly and only when necessary. Start with the lowest level and increase gradually.
- Ensure the contact points are making proper contact with the dog's skin. For long-haired dogs, use the longer contact points provided.
- This device is waterproof (IPX7 certified), but ensure the charging port is securely sealed before exposure to water.
- Mantenir fora de l'abast dels nens.
Contingut del paquet
The PAWPRO Dog Training Collar package includes the following items:
- Training Collar Receiver
- Transmissor remot
- Corretja de coll ajustable
- Cable de càrrega USB
- Eina de prova de llum
- Short and Long Contact Points (with rubber covers)
- Wrist Lanyard for Remote
- Clicker/Whistle
- Manual d'usuari
Imatge: Més deview of the PAWPRO Dog Training Collar system, showing the remote transmitter, collar receiver, and included accessories like the clicker and lanyard.
Guia de configuració
1. Càrrega dels dispositius
Before first use, fully charge both the collar receiver and the remote transmitter. The charging time is approximately 2 hours.
- Connect the USB charging cable to the charging ports on both the receiver and transmitter.
- Plug the other end of the USB cable into a standard USB power adapter (not included).
- The battery indicator on the remote will show charging status. The collar receiver will typically have an indicator light that changes when fully charged.
Image: The remote transmitter and collar receiver connected to a USB charging cable, illustrating the charging process.
2. Adjuntar punts de contacte
Select the appropriate contact points based on your dog's coat length. Use shorter points for short-haired dogs and longer points for long-haired dogs to ensure proper skin contact.
- Screw the chosen contact points onto the receiver.
- Ensure the rubber covers are placed over the contact points for comfort and to prevent irritation.
Image: Diagram illustrating the selection of short or long contact points for the collar receiver, depending on the dog's fur length.
3. Ajust del collar
Proper fit is crucial for effectiveness and comfort.
- Place the receiver on the center of your dog's throat, with the contact points touching the skin.
- Adjust the strap so it is snug but not too tight. You should be able to fit one finger comfortably between the collar and your dog's neck.
- Retalla l'excés de longitud de la corretja si cal.
Image: A dog wearing the PAWPRO training collar, demonstrating proper placement around the neck.
4. Pairing the Remote and Collar (if not pre-paired)
The devices are usually pre-paired. If not, follow these steps:
- Enceneu el transmissor remot.
- Press and hold the power button on the collar receiver until the indicator light flashes.
- Within 10 seconds, press any mode button (Beep, Vibration, or Static) on the remote.
- The collar indicator light will stop flashing and remain solid, indicating successful pairing.
Instruccions de funcionament
Remote Transmitter Overview
Image: Close-up of the PAWPRO remote transmitter, showing the display, mode buttons (Beep, Vibration, Static), and intensity adjustment buttons.
- Mode bip: Produces an audible tone.
- Mode de vibració: Delivers a non-harmful vibration.
- Mode estàtic: Provides a static correction (11 adjustable levels).
- Ajust de nivell: Use the up/down buttons to adjust static correction intensity.
- Bloqueig de seguretat: The remote features a security lock to prevent accidental activation.
Modes d’entrenament
The PAWPRO collar offers three training modes: Beep, Vibration, and Static. It is recommended to start with the Beep or Vibration mode and only use Static correction if necessary, beginning at the lowest effective level.
Image: Visual representation of the three training modes: Beep, Vibration, and Static (with 11 levels), along with the remote and collar receiver.
Using the Clicker/Whistle
The included clicker/whistle can be used for positive reinforcement training. A clicker marks desired behavior, followed by a reward.
Image: A person demonstrating the use of the 2-in-1 clicker and whistle for daily dog training.
Range and Waterproof Features
The remote transmitter has a range of up to 600 meters (actual range may vary based on terrain and obstacles). The collar receiver is IPX7 certified waterproof, allowing your dog to swim or play in water without damage to the device.
Image: A dog running in a field, with an overlay indicating the 600-meter range of the PAWPRO training collar system.
Image: The PAWPRO collar and remote placed near water, emphasizing the waterproof design of the collar receiver.
Multi-Dog Training
The remote transmitter can control up to two collar receivers (additional receivers sold separately).
Image: Illustration showing the PAWPRO remote transmitter capable of controlling two separate dog collars for multi-dog training.
Manteniment
- Neteja: Netegeu regularment la corretja del collar i el receptor amb anuncis.amp cloth. Ensure the contact points are free of dirt and debris.
- Cura de la bateria: Charge the devices fully when the battery is low. Avoid completely draining the battery for extended periods.
- Emmagatzematge: Store the collar and remote in a dry, cool place when not in use.
- Punts de contacte: Periodically check the contact points for wear and tear. Replace if damaged.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El collar no respon al comandament a distància | Bateria baixa en qualsevol dels dos dispositius; dispositius no emparellats; fora de l'abast. | Charge both devices; re-pair the remote and collar; ensure you are within the operational range. |
| Static correction not working | Poor contact with dog's skin; static level too low; contact points are too short for dog's fur. | Adjust collar fit; increase static level gradually; use longer contact points for long-haired dogs. Use the test light tool to verify function. |
| Collar indicator light not working | Collar is off; low battery. | Turn on the collar; charge the collar. |
| El gos mostra signes d'irritació de la pell | Collar worn too long; collar too tight; allergic reaction to material. | Remove collar immediately; clean dog's neck; consult a veterinarian. Ensure collar is not worn for more than 12 hours. |
Especificacions
- Model: PP7-A
- Marca: PAWPRO
- Modes d'entrenament: Beep, Vibration, Static (11 levels)
- Interval: Up to 600 meters (actual range may vary)
- Classificació impermeable: IPX7 (Collar Receiver)
- Tipus de bateria: Ió de liti (recarregable)
- Temps de càrrega: Aproximadament 2 hores
- Battery Life (Intensive Use): Fins a 15 dies
- Durada de la bateria (mode d'espera): Fins a 60 dies
- Collar Adjustment: De 20 cm a 90 cm
- Recommended Dog Weight: Over 4.5 kg (10 lbs)
- Recommended Dog Age: Més de 6 mesos
- Material: Hypoallergenic materials
- Certificacions: CE
Garantia i Suport
The PAWPRO Dog Training Collar Model PP7-A comes with a 2-year warranty.
For technical support, warranty claims, or any questions regarding your product, please contact PAWPRO customer service. Contact information can typically be found on the product packaging or the official PAWPRO weblloc.
PAWPRO is a French company with customer service based in Auvergne, France.