1. Introducció
Thank you for choosing the BASIC HALO Split Air Conditioner. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new air conditioning unit. Please read this manual thoroughly before using the appliance and retain it for future reference.
This unit is designed to provide comfortable cooling and heating (if applicable) for your indoor environment, featuring a 18400 BTU capacity and integrated Wi-Fi for smart control.
2. Informació de seguretat
Observeu sempre les precaucions bàsiques següents per reduir el risc d'incendi, descàrrega elèctrica o lesions:
- Llegiu totes les instruccions abans d'utilitzar.
- Aquest aparell ha d'estar correctament connectat a terra.
- No feu funcionar la unitat amb les mans mullades.
- Ensure the power supply matches the unit's specifications (220V).
- No introduïu objectes a l'entrada o sortida d'aire.
- Mantenir els nens allunyats de la unitat.
- Professional installation is highly recommended to ensure proper setup and safety.
- Desconnecteu l'alimentació abans de netejar o realitzar qualsevol manteniment.
3. Producte acabatview
The BASIC HALO Split Air Conditioner consists of an indoor unit, an outdoor unit, and a remote control. It offers various modes for optimal climate control.
Figura 3.1: Indoor Unit and Remote Control. The indoor unit distributes conditioned air, while the remote allows for convenient control of settings.
Figura 3.2: Outdoor Unit. This unit houses the compressor and condenser, responsible for heat exchange with the outside environment.
Figura 3.3: Davant view of the HALO Indoor Unit, showcasing its sleek design and display area.
Figura 3.4: Indoor Unit highlighting the Wi-Fi connectivity feature, allowing for smart control.
4. Configuració
Proper installation is crucial for the performance and longevity of your air conditioner. It is strongly recommended that installation be performed by a qualified professional.
4.1 Passos d'instal·lació (recomanat per professionals)
- Seleccioneu la ubicació: Choose appropriate locations for both indoor and outdoor units, ensuring proper airflow and drainage.
- Muntar la unitat interior: Securely mount the indoor unit to the wall, ensuring it is level.
- Install Outdoor Unit: Place the outdoor unit on a stable, level surface, away from direct sunlight or obstructions.
- Connect Refrigerant Pipes: Connect the copper refrigerant pipes between the indoor and outdoor units. Ensure connections are tight and leak-free.
- Cablejat elèctric: Connect the electrical wiring according to the wiring diagram provided in the full installation manual. Ensure proper grounding.
- Instal·lació de canonades de drenatge: Install the drainage pipe from the indoor unit to ensure proper condensation removal.
- Vacuum and Test: Evacuate the refrigerant lines to remove air and moisture, then test the unit for proper operation.
4.2 Engegada inicial
After professional installation, ensure all connections are secure. Turn on the main power supply to the unit. The unit will typically perform a self-check. You can then use the remote control or the Wi-Fi app to begin operation.
5. Instruccions de funcionament
Your HALO Split Air Conditioner offers various modes and settings for optimal comfort. Use the remote control or the Wi-Fi app to adjust settings.
5.1 Funcions de control remot
- Botó d'encesa: Encén o apaga la unitat.
- Botó de mode: Cycles through operating modes: Cool, Heat (if applicable), Fan, Dry, Auto.
- Temperature Buttons (▲/▼): Ajusta la temperatura desitjada.
- Botó de velocitat del ventilador: Selecciona la velocitat del ventilador (Automàtic, Baixa, Mitjana, Alta).
- Botó de swing: Controls the vertical louver movement for air direction.
- Botó del temporitzador: Configura el temporitzador d'encesa/apagada per al funcionament programat.
- Mode de repòs: Ajusta la temperatura i la velocitat del ventilador per a un son còmode.
- Botó Wi-Fi: Activates or deactivates the Wi-Fi function for smart control.
Connectivitat Wi-Fi 5.2
The unit features Wi-Fi connectivity for remote control via a smartphone application. Follow these general steps to connect:
- Download the official BASIC HALO smart app from your device's app store.
- Ensure your air conditioner is powered on and the Wi-Fi function is activated (refer to remote control).
- Follow the in-app instructions to add your device, which typically involves connecting to the unit's temporary Wi-Fi network and then configuring it to join your home Wi-Fi network.
- Once connected, you can control the unit from anywhere using the app.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del teu aire condicionat.
6.1 Neteja del filtre d'aire
Netegeu els filtres d'aire cada dues setmanes o amb més freqüència si la unitat s'utilitza intensament o en ambients polsegosos.
- Desconnecteu l'alimentació de la unitat.
- Obriu el panell frontal de la unitat interior.
- Traieu els filtres d'aire.
- Renteu els filtres amb aigua tèbia i un detergent suau. Esbandiu-los bé.
- Deixeu que els filtres s'assequin completament en una zona a l'ombra abans de tornar-los a col·locar.
- Tanqueu el panell frontal i restableixeu l'alimentació.
6.2 Neteja de la unitat exterior
Periodically check the outdoor unit for debris, leaves, or dirt that may obstruct airflow. Carefully remove any obstructions. Do not spray water directly onto the electrical components.
6.3 Neteja general
Netegeu la superfície de la unitat interior amb un drap suau i sec. Per a taques difícils, utilitzeu un drapamp cloth with a mild detergent, then wipe dry. Do not use harsh chemicals or abrasive cleaners.
7. Solució De Problemes
Refer to the table below for common issues and their potential solutions. If the problem persists, contact qualified service personnel.
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no comença | No power supply; Remote control batteries low; Timer function active. | Check power connection and circuit breaker; Replace remote batteries; Cancel timer setting. |
| Refrigeració/calefacció insuficient | Dirty air filters; Blocked air inlet/outlet; Room too large; Doors/windows open; Temperature setting incorrect. | Clean air filters; Remove obstructions; Ensure room size is appropriate; Close doors/windows; Adjust temperature setting. |
| Soroll inusual | Loose parts; Unit not level; Foreign object in fan. | Check for loose parts and tighten; Ensure unit is level; Turn off and inspect for foreign objects (contact service if unsure). |
| Fuita d'aigua de la unitat interior | Canonada de desguàs obstruïda; instal·lació incorrecta. | Clear drain pipe obstruction; Contact installer for inspection. |
| Problemes de connexió Wi-Fi | Router issues; Incorrect Wi-Fi password; Unit too far from router. | Restart router; Re-enter Wi-Fi password in app; Move unit closer to router or use a Wi-Fi extender. |
8. Especificacions
Detailed technical specifications for the BASIC HALO Split Air Conditioner, Model BSACH-F18CD.
| Característica | Especificació |
|---|---|
| Nom de marca | BÀSIC |
| Informació del model | BSACH-F18CD-I, BSACH-F18CD-O |
| Dimensions del producte | 99.1 x 61.2 x 44.1 cm; 62 quilograms |
| Eficiència | Alt |
| Capacitat | 1.54 peus cúbics |
| Consum anual d'energia | 4909 quilowatts-hora |
| Tipus d'instal·lació | Sistema dividit |
| Número de part | BSACH-F18CD |
| Factor de forma | Mini Split |
| Característiques especials | Heating and Cooling Function |
| Color | Blanc |
| Voltage | 220 Volts |
| Wattage | 560 watts |
| Components inclosos | Cap |
| Piles incloses? | No |
| Necessites piles? | Sí |
| Pes de l'article | 62 quilos |
| Capacitat de refrigeració | 18400 unitats tèrmiques britàniques |
| Font d'alimentació | Elèctric amb cable |
| Nom del model | BSACD F18CD |
9. Garantia i Suport
For warranty information, please refer to the warranty card included with your product or contact your local dealer. Keep your purchase receipt as proof of purchase.
For technical support, service, or spare parts, please contact BASIC customer service through their official website or the contact information provided at the point of purchase. When contacting support, please have your model number (BSACH-F18CD) and serial number ready.