SIMON 10000168-138
SIMON 10000168-138 French Base Cover with USB Charger User Manual
Model: 10000168-138 | Brand: SIMON
1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SIMON 10000168-138 French Base Cover with USB Charger. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Una imatge que mostra la part frontal view of the SIMON French Base Cover with an integrated USB charger. The cover is black with a circular French socket and a rectangular USB charging port above it. The USB port is labeled '5V === 2.1A Max' and has a USB symbol. The brand name 'simon' is visible below the socket.
2. Informació de seguretat
ADVERTIMENT: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes. Failure to follow these instructions can result in electric shock, fire, or serious injury.
- Always disconnect power at the circuit breaker or fuse box before installing or servicing.
- No instal·lar en mullat o damp ubicacions.
- Assegureu-vos que totes les connexions del cablejat estiguin segures i aïllades correctament.
- Do not exceed the maximum electrical ratings of the device.
- Mantenir fora de l'abast dels nens.
3. Contingut del paquet
Si us plau, comproveu el contingut del paquet en rebre'l. Si falta algun article o hi ha algun dany, poseu-vos en contacte amb el vostre distribuïdor.
- 1 x SIMON 10000168-138 French Base Cover with USB Charger
- Cargols de muntatge (si escau)
4. Configuració i instal·lació
This product is designed for installation into a standard electrical wall box. Professional installation is highly recommended.
- Desconnexió d'alimentació: Turn off the power to the circuit at the main electrical panel (circuit breaker or fuse box) before beginning any work. Verify power is off using a voltage provador.
- Traieu la coberta antiga (si escau): Carefully remove the existing wall plate and outlet from the wall box.
- Cablejat: Connect the electrical wires from the wall box to the corresponding terminals on the SIMON base cover. Ensure correct polarity (Live, Neutral, Earth) as per local wiring standards. Tighten all terminal screws securely.
- Muntatge: Gently push the wired base cover into the wall box. Secure it using the provided mounting screws. Do not overtighten.
- Fixeu la placa frontal: Snap or screw the decorative faceplate onto the base cover, ensuring it sits flush against the wall.
- Restaura l'alimentació: Turn the power back on at the main electrical panel.
- Prova: Test the French socket and the USB charging port to ensure they are functioning correctly.
5. Instruccions de funcionament
The SIMON 10000168-138 provides both a standard French electrical socket and a USB charging port.
- French Socket: Insert the plug of your electrical appliance into the French socket. Ensure the plug is fully inserted.
- Port de càrrega USB: Connect your USB charging cable to the USB port on the base cover. The port provides 5V DC at a maximum of 2.1A. Connect the other end of the cable to your compatible device (e.g., smartphone, tablet) for charging.
- Do not overload the socket or the USB port beyond their specified ratings.
6. Manteniment
To ensure the longevity and proper functioning of your SIMON base cover, follow these maintenance guidelines:
- Neteja: Disconnect power before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
- Inspecció: Periodically inspect the base cover for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician.
- No user-serviceable parts are inside. Do not attempt to disassemble the unit.
7. Solució De Problemes
If you experience issues with your SIMON 10000168-138, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No power from socket/USB | Circuit breaker tripped; Loose wiring; Faulty device | Check circuit breaker and reset if tripped. Verify wiring connections (power off). Test with another device. |
| La càrrega USB és lenta | Device requires more current than 2.1A; Faulty cable; Device issue | Ensure device is compatible with 2.1A charging. Try a different USB cable. Test with another device. |
| Sobreescalfament | Overload; Faulty wiring | Unplug devices. Reduce load. Disconnect power and have wiring checked by an electrician. |
If the problem persists after attempting these solutions, contact a qualified electrician or customer support.
8. Especificacions
| Característica | Detall |
|---|---|
| Número de part | 10000168-138 |
| Número de model de l'article | 10000168-138 |
| Dimensions del producte | 10 x 10 x 10 cm |
| Pes de l'article | 100 grams |
| Number of Item Subunits | 1 |
| Components inclosos | Product (Base Cover with USB Charger) |
| Necessites piles? | No |
| Primera data disponible | 30 de març de 2022 |
9. Garantia i Suport
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.