1. Producte acabatview
The Ikea KLUNSA LED Spotlight and Clamp is a versatile, battery-operated lighting solution designed for small or multi-purpose spaces. Its portable design allows for flexible placement using either a clamp or permanent screw installation. The integrated LED light source offers energy efficiency and a long lifespan. The light activates with a touch and features an automatic shut-off after 30 minutes.
Característiques principals:
- Funciona amb piles per a una comoditat sense fil.
- Flexible mounting options: clamp or screw installation.
- Touch-activated operation with 30-minute automatic shut-off.
- Font de llum LED d'eficiència energètica.
- Provides focused light for smaller areas.

This image shows the KLUNSA LED Spotlight providing illumination within a dark closet space, highlighting its utility for discreet and effective lighting in confined areas. The compact design allows it to be mounted unobtrusively.
2. Informació de seguretat
Please read and understand all safety instructions before using the product. Keep this manual for future reference.
- Seguretat de la bateria:
- Use only the specified battery type (AAA, not included).
- No barregeu piles velles i noves, o diferents tipus de piles.
- Introduïu les piles amb la polaritat correcta (+/-).
- Remove depleted batteries promptly to prevent leakage.
- No exposeu les bateries a una calor excessiva o al foc.
- Mantingueu les piles fora de l'abast dels nens.
- Col·locació del producte:
- Ensure the spotlight is securely mounted, whether by clamp or screws, to prevent it from falling.
- Do not place the spotlight in direct contact with water or high humidity, as it is not water resistant.
- Avoid placing the spotlight near heat sources or in direct sunlight.
- Llum LED:
- Do not stare directly into the LED light source, as it may cause eye strain.
- The LED light source is not replaceable. Do not attempt to disassemble the lamp.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- Ikea KLUNSA LED Spotlight unit
- Integrat clamp mecanisme
- Mounting screws (for permanent installation option)
- Manual d'usuari (aquest document)
Note: Batteries (AAA) are not included and must be purchased separately.
4. Configuració
4.1 Instal·lació de la bateria
- Locate the battery compartment cover on the back of the spotlight unit.
- Gireu o feu lliscar suaument la tapa per obrir-la.
- Introduïu dues piles AAA, assegurant-vos de la polaritat correcta (+ i -) tal com s'indica a l'interior del compartiment.
- Torneu a col·locar la tapa del compartiment de la bateria, assegurant-vos que estigui ben tancada.

Aquesta imatge proporciona una clara view of the open battery compartment, illustrating how two AAA batteries (specifically "LADDA 2450" batteries are shown) should be placed with their positive and negative terminals aligned correctly.
4.2 Opcions de muntatge
The KLUNSA spotlight offers two installation methods:
4.2.1 clamp Instal·lació
For temporary or flexible placement, use the integrated clamp:
- Identify a suitable surface (e.g., shelf edge, cabinet partition) where the clamp pot agafar amb seguretat.
- Obriu el clamp by pressing the lever.
- Position the spotlight and release the lever to secure the clamp onto the desired surface.
- Ensure the spotlight is stable and does not wobble.

This image demonstrates the KLUNSA spotlight clamped onto the edge of a white shelf, providing illumination to the items below. It highlights the ease of repositioning the light without permanent fixtures.
4.2.2 Screw Installation (Permanent)
For a more permanent fixture, use the provided screws:
- Choose a desired mounting location.
- Mark the positions for the screws using the spotlight's mounting bracket as a guide.
- Drill pilot holes if necessary, appropriate for the screw size and material.
- Fixeu el focus a la superfície amb els cargols proporcionats.
- Ensure the spotlight is firmly attached and stable.

This image illustrates two KLUNSA LED Spotlights permanently installed via screws on the underside of a cabinet shelf, providing downward illumination. This setup is ideal for consistent lighting in areas like wardrobes or display cabinets.
5. Instruccions de funcionament
The KLUNSA LED Spotlight is designed for simple, touch-activated operation.
- Encendre: Gently touch the surface of the spotlight. The LED light will illuminate.
- Apagat automàtic: The spotlight is equipped with an automatic timer and will turn off by itself after approximately 30 minutes of continuous operation.
- To Turn Off Manually: If you wish to turn off the light before the 30-minute timer expires, simply touch the surface of the spotlight again.

This image shows the KLUNSA LED Spotlight in operation, casting a bright, focused light on items placed on a glass shelf inside a cabinet, demonstrating its effectiveness in illuminating specific areas.
6. Manteniment
Regular maintenance ensures optimal performance and longevity of your KLUNSA LED Spotlight.
- Neteja:
- Wipe the spotlight clean with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Substitució de la bateria:
- When the light dims or stops functioning, it is time to replace the batteries.
- Follow the "Battery Installation" steps in Section 4.1 to replace the AAA batteries.
- Eliminar les bateries usades d'acord amb la normativa local.
- Emmagatzematge:
- If storing the spotlight for an extended period, remove the batteries to prevent leakage.
- Emmagatzemar en un lloc fresc i sec.
7. Solució De Problemes
If you encounter issues with your KLUNSA LED Spotlight, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. |
|
|
| La llum és tènue. | Les bateries estan baixes. | Substituïu-les per piles AAA noves. |
| La llum s'apaga massa ràpid. | Automatic shut-off feature is active. | This is normal operation. The light is designed to turn off after 30 minutes. Touch again to reactivate. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Ikea |
| Nom del model | KLUNSA (STOTTA) |
| Número de model | 403.252.43 |
| ASIN | B07T5KTSZR |
| GTIN/UPC | 300846119714 |
| Color | Blanc |
| Material | Brass (Enclosure), Acrylic (Shade) |
| Font de llum | LED |
| Font d'alimentació | Alimentat per piles (2x AAA, no incloses) |
| Flux lluminós | 30 lúmens |
| Mètode de control | Toca |
| Apagat automàtic | Aprox. 30 minuts |
| Tipus de muntatge | Clamp and Screw Mount |
| Dimensions (Diàmetre x Alçada) | 7 cm (3") x 3 cm (1") |
| Pes de l'article | 0.1 quilos |
| Ús interior/exterior | Interior |
| País d'origen | Xina |
9. Garantia i Suport
Ikea products are designed with quality and durability in mind. For information regarding warranty coverage, returns, or technical support, please refer to your purchase receipt or visit the official Ikea weblloc per a la vostra regió.
You can also contact Ikea customer service directly for assistance with product-related inquiries.
Oficial d'Ikea Weblloc: www.ikea.com