GROHE Plus Single-Lever Washbasin Mixer Tap DN 15 L-Size, Model 23873003 Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your GROHE Plus Single-Lever Washbasin Mixer Tap, Model 23873003. Please read this manual thoroughly before installation and use to ensure proper function and safety. This product is designed for use in bathrooms.

2. Informació de seguretat

• Tanqueu sempre el subministrament principal d'aigua abans de començar qualsevol treball d'instal·lació o manteniment.
• Assegureu-vos que totes les connexions estiguin ben fixades per evitar fuites.
• Si no esteu segurs de cap pas, consulteu un lampista qualificat.
• Protect against frost. Drain the system if there is a risk of freezing.
• Do not use abrasive cleaners, solvents, or scouring pads on the faucet surface, as these can damage the GROHE StarLight finish.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• GROHE Plus Single-Lever Washbasin Toqueu mesclador
• Mànegues de connexió flexibles
• Push-open drain set 1 1/4 inch
• Maquinari de muntatge
• Instruccions de cura
• Manual d'instruccions (aquest document)

4. Especificacions

5. Configuració i instal·lació

Before installation, ensure the main water supply is turned off. This faucet is designed for single-hole deck mounting.

1. Prepareu la superfície de muntatge: Ensure the sink or countertop surface is clean, dry, and flat around the faucet hole. The mounting hole diameter should be approximately 34mm.
2. Insert the Faucet: Place the faucet body into the single mounting hole on the sink or countertop.
3. Assegureu l'aixeta: From underneath the sink, use the provided quick mount system to firmly secure the faucet. Ensure the faucet is properly aligned before tightening.
4. Connecteu les línies de subministrament d'aigua: Connect the flexible connection hoses from the faucet to your hot and cold water supply lines. The hoses are typically G 3/8. Ensure connections are hand-tightened, then use a wrench for a final quarter turn, being careful not to overtighten.
5. Install Drain Set: Install the push-open drain set (1 1/4 inch) into the sink drain hole according to its separate instructions. Ensure all seals are correctly seated to prevent leaks.
6. Comproveu si hi ha fuites: Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leakage. If leaks occur, tighten the connections slightly.

Figura 1: Technical drawing illustrating the dimensions and installation points of the GROHE Plus Single-Lever Washbasin Mixer Tap. Key dimensions include overall height, spout reach, and mounting hole diameter.

6. Instruccions de funcionament

Your GROHE Plus faucet features a single lever for intuitive control of water flow and temperature.

• Control de flux d'aigua: Lift the lever upwards to increase water flow. Push the lever downwards to decrease flow and turn off the water.
• Control de temperatura: Move the lever to the left for hot water and to the right for cold water. The GROHE SilkMove ceramic cartridge ensures smooth and precise temperature adjustment.
• Temperature Limiter: The integrated temperature limiter can be adjusted during installation to prevent scalding, setting a maximum hot water temperature.
• Giratori del bec: The faucet spout has a swivel range of 90 degrees, allowing for flexible use within the washbasin.
• AquaGuide Mousseur: The GROHE AquaGuide allows you to adjust the angle of the water stream from the mousseur for optimal comfort and splash reduction.

Figura 2: The GROHE Plus Single-Lever Washbasin Mixer Tap, showcasing its modern design and single lever control.

7. Manteniment

Regular cleaning and maintenance will ensure the longevity and optimal performance of your GROHE Plus faucet.

• Neteja de la superfície: Clean the GROHE StarLight chrome surface with a soft cloth and a mild, non-abrasive cleaning agent. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots. Avoid cleaners containing alcohol, hydrochloric acid, formic acid, acetic acid, or phosphoric acid.
• Cleaning the Mousseur: The SpeedClean Mousseur is designed for easy maintenance. Limescale deposits can be removed by simply wiping the silicone nozzles with your finger. For more stubborn deposits, unscrew the mousseur and soak it in a mild descaling solution.
• Comprovació de connexions: Periodically inspect all water connections for any signs of leaks or corrosion. Tighten connections if necessary, but do not overtighten.

8. Solució De Problemes

9. Garantia i Suport

For detailed warranty information, product registration, or technical support, please visit the official GROHE website or contact GROHE customer service directly. Keep your proof of purchase for warranty claims.

Podeu trobar més informació i dades de contacte a GROHE Store on Amazon.