1. Producte acabatview
The Kulannder 5D Diamond Painting LED Magnifier Lamp is designed to assist with detailed tasks such as diamond painting, cross-stitch, needlework, reading, and small repairs. It features a main lens with 4X magnification and a smaller inset lens with 6X magnification, complemented by three integrated LED lights for enhanced illumination. The flexible gooseneck and strong clip allow for versatile positioning and secure attachment to various surfaces.
Image 1.1: Kulannder LED Magnifier Lamp, illustrating its flexible design and clip for attachment.
2. Contingut del paquet
- 1 x LED Light Magnifier with Clip
- 1 x drap de neteja de lents
3. Especificacions del producte
| Característica | Especificació |
|---|---|
| Marca | Kulannder |
| Color | Negre |
| Magnifier Material | Lent acrílica |
| Font de llum | 3 x LED Illuminating Lamps |
| Magnification (Large Lens) | 4X |
| Magnification (Small Lens) | 6X |
| Font d'alimentació | 3 piles AAA (no incloses) |
| Longitud del coll de cisne | Approximately 33cm / 13 inches |
| Clamp Obertura | Approximately 6cm / 2.36 inches |
4. Instruccions de configuració
Follow these steps to set up your Kulannder LED Magnifier Lamp:
- Desempaquetar components: Carefully remove the magnifying glass head and the gooseneck with the attached clamp de l'embalatge.
- Connect Head to Gooseneck: Securely connect the magnifying glass head to the top of the gooseneck. Ensure it clicks into place or is firmly screwed on, depending on the model.
- Instal·leu les bateries: Locate the battery compartment on the magnifying glass head. Open it and insert three (3) AAA batteries (not included), ensuring correct polarity. Close the compartment securely.
- Adjunta a la superfície: Use the strong clamp to attach the lamp to a stable surface such as a desk, table, or workbench. Ensure the clamp is firmly secured to prevent accidental dislodgement.
Image 4.1: Visual guide for connecting the magnifier head, installing batteries, and clamping the unit to a surface.
5. Instruccions de funcionament
Operating your LED Magnifier Lamp és senzill:
- Encès/apagat: Locate the ON/OFF switch on the side of the magnifying glass head. Slide the switch to the "ON" position to turn on the LED lights. Slide it to "OFF" to turn them off.
- Ajust de posició: The flexible gooseneck allows for 360-degree adjustment. Bend and position the gooseneck to direct the magnifier and light precisely over your work area. The gooseneck is designed to hold its position without collapsing.
- Utilize Magnification: Use the large 4X lens for general magnification. For finer details, utilize the smaller 6X inset lens.
Image 5.1: The flexible gooseneck allows for precise positioning of the magnifier and light.
Image 5.2: The magnifier features both 4X and 6X lenses for varying levels of detail.
6. Manteniment
To ensure the longevity and optimal performance of your magnifier lamp:
- Neteja de la lent: Use the provided lens cleaning cloth to gently wipe the magnifier lenses. Avoid using abrasive materials or harsh chemical cleaners, as these can scratch or damage the acrylic lens.
- Substitució de la bateria: When the LED lights dim or stop working, replace all three AAA batteries with new ones. Ensure correct polarity during installation.
- Emmagatzematge: Quan no estigui en ús, emmagatzemeu la lamp en un lloc net i sec, allunyat de la llum solar directa i de temperatures extremes.
Image 6.1: Use the included lens cloth for gentle cleaning of the magnifier lens.
7. Solució De Problemes
- Els llums no s'encenen:
- Comproveu si l'interruptor d'engegada/apagada està en la posició "ON".
- Assegureu-vos que les bateries estiguin instal·lades correctament amb la polaritat correcta.
- Substituïu les piles velles per unes de noves.
- Lights Flickering:
- Això sovint indica que la bateria està baixa. Canvieu les piles.
- Ensure battery compartment connections are clean and secure.
- Magnifier Not Holding Position:
- Assegureu-vos que el clamp is securely fastened to a stable surface.
- Adjust the gooseneck carefully to find a stable position.
8. Garantia i Suport
The Kulannder LED Magnifier Lamp comes with a one-year warranty. If you encounter any quality issues or require assistance, please contact Kulannder customer support. Refer to the product packaging or the retailer's weblloc web per obtenir informació de contacte específica.