Blackvue DR900S-2CH Dashcam User Manual

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Blackvue DR900S-2CH Dashcam. This 2-channel system offers 4K UHD recording for the front camera and Full HD recording for the rear camera, ensuring high-quality video capture for your vehicle.

Per a un rendiment òptim i una major durada del dispositiu, llegiu atentament aquest manual abans d'utilitzar-lo.

Què hi ha a la caixa

Verifiqueu que tots els components que s'enumeren a continuació s'inclouen al paquet:

• Càmera frontal (unitat principal)
• Càmera posterior
• Power Magic Pro Hardwire Kit
• Cable de connexió de la càmera posterior
• Targeta Micro SD de 16 GB
• Power Cable (Cigarette Lighter Adapter)
• Clips de cable
• Spare Mounting Tapes
• Eina de palanca
• Guia d'inici ràpid

Image: All components included in the Blackvue DR900S-2CH Dashcam package, laid out for inspection.

Configuració i instal·lació

1. Inserció de la targeta Micro SD

Before mounting, ensure the 16GB Micro SD card is inserted correctly into the main unit. The card slot is typically located on the side or bottom of the camera unit.

2. Front Camera Mounting

1. Netegeu la zona del parabrisa on es muntarà la càmera.
2. Peel off the protective film from the mounting tape on the front camera bracket.
3. Attach the front camera to the windshield, ideally behind the rearview mirall, assegurant-vos que no us obstrueixi view. Press firmly for 30 seconds.

Image: The Blackvue DR900S-2CH front dashcam mounted on the interior side of a car's windshield, positioned centrally.

3. Rear Camera Mounting

1. Munteu la càmera posterior al parabrisa posterior, assegurant una visió clara view.
2. Connect the rear camera to the front camera using the provided coaxial cable. Route the cable neatly along the vehicle's headliner and pillars using the pry tool and cable clips.

4. Power Connection (Power Magic Pro Hardwire Kit)

The Power Magic Pro Hardwire Kit allows the dashcam to operate in parking mode and prevents vehicle battery drain. Professional installation is recommended for this component.

• Connect the red wire (ACC+) to a switched fuse (power only when ignition is on).
• Connect the yellow wire (BATT+) to a constant fuse (always-on power).
• Connect the black wire (GND) to a metal ground point on the vehicle chassis.
• Connect the Power Magic Pro output cable to the dashcam's power input.

Refer to the Power Magic Pro's dedicated manual for detailed wiring diagrams and fuse box identification.

Instruccions de funcionament

1. Encès / apagat

The dashcam will automatically power on and begin recording when the vehicle's ignition is turned on (if connected via Power Magic Pro or cigarette lighter adapter). It will power off automatically when the ignition is turned off, or enter parking mode if configured.

2. Modes d'enregistrament

• Gravació normal: Continuous loop recording while driving. Older fileLes s se sobreescriuen quan la targeta SD està plena.
• Enregistrament d'esdeveniments: Triggered by impacts detected by the G-sensor or manual events. These files are protected from overwriting.
• Mode d'aparcament: Records only when motion or impact is detected while the vehicle is parked. Requires Power Magic Pro or similar hardwiring.

3. Connectivitat Wi-Fi i ús d'aplicacions

The DR900S-2CH features built-in 2.4/5GHz Wi-Fi. Download the Blackvue App (available on iOS and Android) to connect to your dashcam.

1. Activa la Wi-Fi al teu telèfon intel·ligent.
2. Open the Blackvue App and select "Connect to Dashcam".
3. Select your dashcam from the list (e.g., "Blackvue_DR900S-2CH_XXXXXX").
4. Enter the default password (usually "blackvue").

A través de l'aplicació, pots:

• View viu footage de les dues càmeres.
• Access recorded videos and download them to your phone.
• Adjust dashcam settings (e.g., G-sensor sensitivity, recording quality, parking mode options).
• Actualitza el firmware.

Image: Visual representation of key features: Front 4K UHD, Rear Full HD, Cloud connectivity via Wi-Fi/USB module, Native Parking Mode Support, Dual Band 2.4-5GHz Wi-Fi, and High Efficiency Video Coding (H.265).

4. Funcionalitat del GPS

The built-in GPS module records vehicle speed and location data, which can be viewed during video playback using the Blackvue Viewer software on a computer or within the mobile app.

Manteniment

1. Micro SD Card Management

Regularly format the Micro SD card (at least once a month) using the Blackvue App or Viewer to maintain optimal recording performance and prevent data corruption. Back up any important files abans de formatar.

2. Neteja de la lent

Gently wipe the camera lenses with a soft, lint-free cloth to ensure clear video quality. Avoid using harsh chemicals or abrasive materials.

3. Actualitzacions de firmware

Periodically check for firmware updates via the Blackvue App or the official Blackvue website. Keeping your firmware updated ensures the best performance, new features, and bug fixes.

Resolució de problemes

Especificacions

Garantia i Suport

For warranty information and technical support, please refer to the official Blackvue weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Official Blackvue Weblloc: www.blackvue.com