Technoline WS 8015 Digital Wall Clock User Manual

1. Producte acabatview

The Technoline WS 8015 is a versatile digital wall clock designed to provide accurate time, date, day of the week, indoor temperature, and indoor humidity readings. It features a large, easy-to-read LCD display and is radio-controlled for automatic time synchronization. The clock can be mounted on a wall or placed on a table using its integrated stand.

Imatge 1.1: Frontal view of the Technoline WS 8015 Digital Wall Clock. The display shows the current time (10:38 AM), date (10-26), day of the week (MON), indoor temperature (25.8°C), and indoor humidity (55%).

Característiques principals:

• DCF-77 Radio Controlled Clock with manual time setting option.
• Alarm with Snooze Function.
• Date and Weekday Display (available in 8 languages).
• Jumbo LCD for enhanced readability.
• Indoor Temperature Display.
• Indoor Humidity Display.
• Flexible mounting: Wall mountable or table standing.

2. Configuració

2.1 Instal·lació de la bateria

The Technoline WS 8015 requires 4 AA batteries (not included) for operation. Ensure correct polarity when inserting the batteries.

1. Localitza la tapa del compartiment de les piles a la part posterior del rellotge.
2. Remove the cover by sliding or unlatching it.
3. Insert 4 new AA batteries according to the polarity markings (+ and -) inside the compartment.
4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

Upon battery insertion, the clock will power on and begin searching for the DCF-77 radio signal for automatic time synchronization.

2.2 Sincronització inicial

After battery installation, the clock will automatically attempt to receive the DCF-77 radio signal. This process can take several minutes to a few hours, depending on your location and environmental conditions. During synchronization, a signal icon may flash on the display.

• Col·loca el rellotge a prop d'una finestra per a una millor recepció del senyal.
• Eviteu col·locar el rellotge a prop de dispositius electrònics que puguin causar interferències (per exemple, televisors, ordinadors, microones).
• Once synchronized, the signal icon will appear solid, and the time, date, and day of the week will be set automatically.

2.3 Manual Time Setting (If Synchronization Fails)

If the clock fails to synchronize with the DCF-77 signal after an extended period, you can set the time manually.

1. Refer to the operating instructions for specific buttons and steps to enter manual setting mode.
2. Adjust the hour, minute, year, month, day, and language for the weekday display using the designated buttons.
3. Confirm each setting to save and exit manual mode.

2.4 Col·locació

The Technoline WS 8015 can be used as a wall clock or a table clock.

• Muntatge a la paret: Use the keyhole slot on the back of the clock to hang it on a screw or nail securely fastened to the wall.
• Taula dreta: Extend the integrated stand on the back of the clock to place it on a flat surface.

3. Instruccions de funcionament

3.1 Mostra informació

La gran pantalla LCD mostra la informació següent:

• Hora: Current time in 12-hour (with AM/PM indicator) or 24-hour format.
• Data: Month and day.
• Dia laborable: Day of the week (e.g., MON, TUE) in the selected language.
• Temperatura interior: Current temperature inside the room, typically in Celsius (°C).
• Humitat interior: Current relative humidity inside the room, displayed as a percentage (%).
• DCF Signal Indicator: Shows the status of radio signal reception.

3.2 Configuració de l'alarma

The clock features a daily alarm with a snooze function.

1. Press the 'ALARM' button to enter alarm setting mode. The alarm time will flash.
2. Feu servir els botons '+' o '-' per ajustar l'hora.
3. Press 'ALARM' again to confirm the hour and move to minute adjustment.
4. Use the '+' or '-' buttons to adjust the minute.
5. Press 'ALARM' to confirm and exit alarm setting mode.
6. To activate/deactivate the alarm, press the 'ALARM ON/OFF' button. An alarm icon will appear on the display when activated.

3.3 Funció de repetició

When the alarm sounds, press the 'SNOOZE' button (usually located on the top or front of the clock) to temporarily silence the alarm. The alarm will sound again after approximately 5-10 minutes. To stop the alarm completely, press any other button.

3.4 Changing Display Modes (12/24 Hour, °C/°F)

The clock allows you to switch between 12-hour and 24-hour time formats, and Celsius and Fahrenheit temperature units.

• Format horari: Press the '12/24H' button to toggle between 12-hour and 24-hour display.
• Unitat de temperatura: Premeu el botó '°C/°F' per canviar entre Celsius i Fahrenheit.

3.5 Weekday Language Setting

The weekday display can be set to one of 8 languages. Refer to the specific buttons on your device, typically a 'LANGUAGE' or 'SET' button, to cycle through the available options until your preferred language is displayed.

4. Manteniment

4.1 Substitució de la bateria

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the steps in Section 2.1 for battery installation. Always replace all 4 batteries at the same time with new ones.

4.2 Neteja

To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing. Avoid getting moisture into the clock's internal components.

5. Solució De Problemes

• Sense pantalla o pantalla atenuada:
  Check if batteries are inserted correctly with the right polarity. Replace old batteries with new ones.
• Clock Not Synchronizing (Incorrect Time):
  Ensure the clock is placed in an area with good DCF-77 signal reception, away from electronic interference. Try moving the clock to a different location, preferably near a window. Allow several hours for synchronization. If synchronization consistently fails, set the time manually as described in Section 2.3.
• Incorrect Temperature/Humidity Readings:
  Ensure the clock is not exposed to direct sunlight, heat sources, or extreme drafts, which can affect sensor accuracy. Allow the clock to stabilize in its environment for at least 30 minutes after placement.
• L'alarma no sona:
  Verify that the alarm is activated (alarm icon visible on display). Check that the alarm time is set correctly.
• Botons que no responen:
  Remove and reinsert the batteries to perform a soft reset. If the issue persists, replace the batteries.

6. Especificacions

Image 6.1: Dimensions of the Technoline WS 8015 Digital Wall Clock. The main time digits are 61mm high, date digits are 25mm high, and temperature/humidity digits are 40mm high.

Image 6.2: Size comparison of the Technoline WS 8015 Digital Wall Clock, held by hands, showing its compact 22.4 cm width.