Introducció
This manual provides comprehensive instructions for the safe and efficient use of your KONCEPT AR3000-CD-MBK-DSK Z-Bar LED Desk Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference.
The Z-Bar LED Desk Lamp features an award-winning three-bar design, offering extensive reach and flexibility. Its adjustable LED head can rotate, sweep side to side, and pivot to direct light precisely where needed. The integrated touchstrip allows for continuous dimming and on/off control.
Informació de seguretat
- Assegureu-vos que la font d'alimentació voltage coincideix amb la lampRequisits de (120 volts).
- No intenteu desmuntar ni modificar el lamp. Encomaneu totes les tasques de manteniment a personal qualificat.
- Eviteu exposar la lamp to excessive moisture or extreme temperatures.
- Desendolleu sempre la lamp de la presa de corrent abans de netejar o realitzar qualsevol manteniment.
- Mantingueu la lamp lluny de materials inflamables.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de continuar amb el muntatge.
- KONCEPT Z-Bar LED Desk Lamp (Unitat principal)
- Base d'escriptori
- Cable d'alimentació
- Manual d'usuari (Aquest document)
Muntatge i muntatge
The KONCEPT Z-Bar LED Desk Lamp requires assembly. Follow these steps carefully.
- Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i col·loqueu-les sobre una superfície neta i plana.
- Adjunta Lamp to Base: Securely attach the main lamp unit to the desk base. Ensure all connections are firm.
- Connectar l'alimentació: Plug the power cord into the lamp's power input, then plug the other end into a standard 120V AC electrical outlet.
Image 1: The KONCEPT Z-Bar LED Desk Lamp fully assembled, showcasing its metallic black finish and flexible arm design.
Image 2: The KONCEPT Z-Bar LED Desk Lamp in a typical desk setup, demonstrating its compact footprint and modern aesthetic.
Instruccions de funcionament
Encès/Apagat i Atenuació
The Z-Bar lamp features a touchstrip control located near the LED head for easy access.
- Per activar/desactivar: Briefly touch any point on the touchstrip.
- To Dim Gradually: Slide your finger along the touchstrip. Sliding towards one end will increase brightness, and towards the other will decrease it.
- To Jump to Specific Brightness: Touch the touchstrip at the desired brightness level.
Ajust de Lamp Head and Arms
El lamp's three-bar design allows for extensive adjustability.
- LED Head Rotation: The LED head can spin in its socket, allowing for 360-degree rotation.
- Side-to-Side Sweep: The LED head can sweep from side to side.
- Ajust del braç: The articulated arms can be positioned to achieve the desired height and reach.
Imatge 3: Una imatge detallada view of the KONCEPT Z-Bar LED Desk Lamp, highlighting its flexible joints and the integrated LED light source.
Manteniment
Un manteniment adequat garanteix la longevitat i un rendiment òptim del vostre lamp.
- Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau i sec per netejar la superfície.amp's surfaces. Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Vida útil LED: The integrated LEDs have a lifespan of approximately 50,000 hours and are not user-replaceable.
- Emmagatzematge: Si emmagatzema la lamp for an extended period, ensure it is clean, dry, and stored in a safe place to prevent damage.
Resolució de problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. | Sense font d'alimentació. | Check if the power cord is securely plugged into both the lamp and the electrical outlet. Verify the outlet is functional. |
| La llum parpelleja o s'atenua inesperadament. | Unstable power connection or faulty outlet. | Ensure the power cord is firmly connected. Try plugging the lamp a una sortida diferent. |
| Touchstrip not responding. | Avaria electrònica temporal. | Desendolleu la lamp for 30 seconds, then plug it back in to reset. Ensure your finger is clean and dry when using the touchstrip. |
If the problem persists after attempting these solutions, please contact KONCEPT customer support.
Especificacions
| Característica | Detall |
|---|---|
| Model | AR3000-CD-MBK-DSK |
| Marca | KONCEPT |
| Lamp Tipus | Escriptori LED Lamp |
| Acabar | Negre metàl·lic |
| Material | Alumini |
| Wattage | 9.5 watts |
| Voltage | 120 Volts |
| Tipus de font de llum | LED |
| Vida útil del LED | 50,000 hores |
| Opcions de temperatura de color | 3500K (Warm) or 4500K (Cool) |
| CRI | 85 |
| Tipus de canvi | Touchstrip (Continuous Dimming & On/Off) |
| Dimensions del producte | 9 "P x 33.88" W x 33.88" H |
| Pes de l'article | 5.53 lliures |
| Longitud del cable | 120 polzades |
| Muntatge obligatori | Sí |
Informació de la garantia
The KONCEPT AR3000-CD-MBK-DSK Z-Bar LED Desk Lamp ve amb a 5 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation. Please retain your proof of purchase for warranty claims.
Atenció al client
For technical assistance, warranty claims, or further inquiries, please contact KONCEPT customer support.
- Weblloc: Visit the official KONCEPT weblloc web per a recursos de suport i informació de contacte.
- Correu electrònic: Refer to your product packaging or the KONCEPT weblloc web per obtenir l'adreça de correu electrònic d'assistència adequada.
- Telèfon: Refer to your product packaging or the KONCEPT weblloc web per a números de telèfon d'atenció al client.
When contacting support, please have your model number (AR3000-CD-MBK-DSK) and proof of purchase readily available.