BUZZTECH S52 Smart Watch User Manual
Appearance Description
Schematic Diagram of Charging
- Operate i strict accordance with the following fiures: 1please use the product-specific magnetic charging cable to charge. by aligning it with the charging contacts on the back of the watch.
- D0 notuse a power adapter with a voltage exceeding 5V and an output current exceeding 14 for charging, as this may cause charging failure and damage to the magnetic charging cable o the device.
- Please actvate the watch when truns out of power before charging: the watch screen will onty light up after about 5 minutes of normal charging.
Introduction to Watch Function
- Bluetooth cali switch,
- Shortcut menu switch.
- Do not Disturb mode.
- Hand lift screen light switch.
- brightness adjustment.
- Silent mode.
- Find your phone.
- Power saving mode.
- About systems.
- Setting.
- Bluetooth connection status.
- Cail Bluetooth status.
Main interface: Display the current time, date, steps and other
information of the watch: Long press on the main screen to switch the main dial left and right, and click OK; Swipe right to bring up the split screen menu.
Steps: Display current steps, distance and calories of the watch.
Call function: Click the call switch. Open the phone settings – Bluetooth-search connection Bluetooth 552-xxxx to play mobile music or make/receive calls, etc.
Heart rate: Slide to this page and keep a while and automatically measure the current real-time dynamic heart rate. Connectable to APP to set real-time monitoring and view data records.
Blood oxygen: Slide to this page to stay, automatically start to measure the current blood oxygen data, vibration prompts the result; You can set timing monitoring and view data records in the APP.
Exercise: Click on the icon on this page to access the multiple sport modes option. Select a sport mode, click the icon to start, and slide right to pause or stop the sport.
Blood pressure: Slide to this page and keep a while and automatically measure the current blood pressure data and vibrate to indicate the result. Connect the APP to view the watch offline measurement data or online measurement synchronously.
Sleep: The bracelet can record and display your sleeping time last night, and the time of deep sleep and light sleep. More detailed data can be viewed synchronously in the API
Weather: Display the local weather conditions. Connect the synchronization APP for normal use, and open the phone GPS to ensure that the APP gets the positioning permission function and network connection.
Music: The watch can control the mobile phone player to play music, This function needs to open the music player and keep the connection with the APP
Information: The watch can receive information notification from the mobile phone. This function needs to open the corresponding function and keep the connection with the APP.
Breathing training: You can choose different breathing patterns and time to start training.
Alarm clock: You can set eight alarm clocks at different times.
Vole assstant: Afe connecting the phone wit Buetooth,you can tap the screen t wake up the volce assistant
Stopwatch: Clickon thefcon 0 sarthe function, and click sart fortiming, pause of reset. Slide right o leave.
Searchs Cck this con,your phone will beep o inicate the orentaton of your phone, s function equirs your phone to Sty connectect wit he viatch APR.No aleton (e phone n Slent mode.
Settings: You can set he watch Language, bightness, sound Shutdown, estoe factory Setungs, and watch system nformation
Watch APP Installation and Connection Instructions
this product need o be connected to a special APP for normal use, such as time display,call aert, and message alert. For Android phones, please do not use Bluetooth to connect and pair with the watch directly. Please scan the following OR code to select the version suitable for your mobile phione system or enter main application markets to download and install Glory Fit.
Device Connection
Before using the APP, please turn on the mobile phone Bluetooth and ‘mobile phone GPS postioning to obtain the moblle phone positioning permission. After the connection is successful, t will prompt “*Topairwith: S52°, please select pairng.
The watch connection operates as folows:
Open the APP and make settings according to the prompt
Click Select Device) to search
Select the name of the searched Bluetooth: 552
Connection succeeded
Note:
- For Android users, the APP. should obtain permissions and fun backstage, otherwise it wil affectthe user experience.
- For systems below iPhone 105 13, afterconnecting inthe APP, you need to connect o the 552 for the second time in the Bluetooth settings of the. mobile phone, and then you can make calt, play multimedia music and other funcions.
Precautions
- charging with water sains.
- This product is an electronic moritoring product,not for medical use, andthe measurement data s for reference only.
- tis ot recommended to wear In hot water baths and longtime Swimming.
- Please charge with the matching charging cable.
FAQ
annot synchranize with the fime of the phone.
The reminder switch s turned on, but there i no reminder on the watch,or the reminder is sporadic.
4. Android's phone Bluetooth often disconnects or has no message alert after a period of connection.
5. The watch cannot measure, of the data i not accurate.
Note: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant o part 15 of the FCC Rules These limits are designed to provide reasonable protection against harm fulinerference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not stalled and used in accordance with the Instruction’s, may cause hamaul inerference to radio communications. However, there i o quarantine that interference will not occur in 2 particular installation. 1fthis equipment does cause hamaul inerference o radio or television reception, which can be determined by turning the equipment off and o, the user s encouraged to try o correct the interference by one or more of the following measures
- Reorient o relocate the receiving antenna. Increase the separation between the equipment and recelver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver s connected.
- Consult the dealer or an experienced radio/TV technician for help.
Documents / Resources
 | S52 Smart Watch |
References
- User Manualmanual.tools
Can version be updated to reduce alarm volume sound?
Can the firmware be updated to reduce the alarm volume?
Based on the BUZZTECH S52 Smart Watch manual, there is no specific mention of a firmware update feature to adjust the alarm volume levels. The manual indicates that the alarm clock function allows you to set up to eight alarm clocks at different times, but it does not list volume control as a configurable setting within the device's menu.
To check for any available updates that might address this, you should:
If no update is available, you may want to check the Settings icon on the watch itself to see if there is a general "Sound" or "Vibration" intensity setting, though the manual primarily highlights brightness and screen-on time adjustments.
Read the full Q&A page
Can version be updated to reduce alarm volume sound?
Can the firmware be updated to reduce the alarm volume?
Based on the BUZZTECH S52 Smart Watch manual, there is no specific mention of a firmware update feature to adjust the alarm volume. The manual indicates that the alarm clock function allows you to set up to eight alarm clocks, but it does not provide options for volume control within the device settings.
To check for any available updates or volume settings, you should:
If the alarm is too loud, you may want to check if the watch is in Silent mode, which can be toggled from the drop-down menu on the main dial, though this typically affects notifications rather than the primary alarm sound.
Read the full Q&A page