bticino-logo

bticino Y4652M3 Control Device With Key Covers

bticino-Y4652M3-Control-Device- With-Key-Covers

Description

  1. Protective shell
  2. Status notification LED
    Blue steady: load ON
    White steady: load OFF
    Blue flashing: object not configured
  3. Control pushbutton
  4. LED pushbutton *
  5. Configurator socket
  6. BUS clamp
  7. Safety and sealing clear cap
    Caution: do not delete

bticino-Y4652M3-Control-Device- With-Key-Covers-1

bticino-Y4652M3-Control-Device- With-Key-Covers-2

Configuration

For device configuration and installation and for any other information, refer to the App or documentation that can be downloaded from the website: www.homesystems-legrandgroup.com

bticino-Y4652M3-Control-Device- With-Key-Covers-3

  • ANDROID: requires Android 5.0 or later with access to Google Play
  • iOS: requires an iPhone with iOS 12,0 or later

Montage

bticino-Y4652M3-Control-Device- With-Key-Covers-4

Caution: leave the protective shell on until the keys are mounted.

bticino-Y4652M3-Control-Device- With-Key-Covers-5

Disassembling

bticino-Y4652M3-Control-Device- With-Key-Covers-6

bticino-Y4652M3-Control-Device- With-Key-Covers-7

bticino-Y4652M3-Control-Device- With-Key-Covers-8

Technical data

Power supply from SCS Bus18 – 27 Vdc
Standby absorption6 mA
Max. absorption7 mA
Operating temperature0 – 40 °C

Warnings and consumer rights

  • Read carefully before use and keep for future reference.
  • Touching the units with wet hands is forbidden.
  • Using liquid cleaners or aerosols is forbidden.
  • Blocking the ventilation openings is forbidden.
  • Modifying the devices is forbidden.
  • Removing protective parts from the devices is forbidden.
  • Exposing the unit to water drops or splashes is x.
  • Installing the units near heat/cold sources is forbidden.
  • Installing the units near harmful gases and powders is forbidden.
  • Fastening the units on unsuitable surfaces is forbidden.
  • Danger of electrical shock.
  • Risk of devices falling because the surface on which they are installed collapses or inappropriate installation.
  • Switch the power supply OFF before any work on the system.
  • Remote operation may cause damage to people or property.
  • Caution: Installation, configuration, starting-up and maintenance must be performed exclusively by qualified personnel.
  • Check that the wall installation has been carried out correctly according to the installation instructions.
  • Check that the unit installation complies with the standards in force.
  • Connect the power supply wires as indicated.
  • Use only the items indicated in the technical specifications for any system expansions.

Documents / Resources

bticino Y4652M3 Control Device With Key Covers [pdf] Instruction Manual
Y4652M3 Control Device With Key Covers, Y4652M3, Control Device With Key Covers, Device With Key Covers, With Key Covers, Key Covers

References

Leave a comment

Your email address will not be published. Required fields are marked *