Joie i-Snug™ 2 Quick Start Guide
For children from 40cm to 75cm in height, with a maximum weight of 13kg.
For detailed instructions and information regarding the use of i-Base™ lx 2, i-Base™ Advance, and i-Base™ Encore, please refer to the individual base's manual.
Visit www.joiebaby.com/product/i-sung-2-i-size-baby-car-seat for more information.
Choose Your Installation
Installation With i-Base™ 2
Height/Weight: 40cm-75cm, max. 13kg
- Using ISOFIX: Follow steps 1-3.
- Using Vehicle Belts: Follow steps 4-5.
Installation Without Base
Height/Weight: 40cm-75cm, max. 13kg
- Using Vehicle Belts: Follow step 6.
Installation Steps (with i-Base™ 2 using ISOFIX)
- Step 1: Attach the i-Base™ 2 to the vehicle seat. Ensure the green indicator is visible (✔️), not red (❌).
- Step 2: Connect the infant carrier to the i-Base™ 2. Push the connection points until they click.
- Step 3: Secure the infant carrier to the base. Ensure the green indicator is visible (✔️), not red (❌).
Installation Steps (with i-Base™ 2 using Vehicle Belts)
- Step 4: Place the i-Base™ 2 on the vehicle seat. Route the vehicle's seat belt through the designated belt guides.
- Step 5: Buckle the vehicle's seat belt and ensure it is properly tightened.
Installation Steps (Without Base using Vehicle Belts)
- Step 6: Place the infant carrier on the vehicle seat. Route the vehicle's seat belt through the designated belt guides on the carrier. Buckle and tighten the belt.
Child Placement and Harnessing
- Step 7-10: Place the child in the infant carrier module. Adjust the harness straps to fit snugly. Ensure the chest clip is at armpit level.
- Step 11: Check harness fit. The straps should be flat and at the correct height for the child (✔️).
- Step 12: Incorrect harness fit (❌).
Care and Maintenance
For cleaning and maintenance instructions, please refer to the full user manual.
Important Information
Always ensure the car seat is installed correctly before each use. Refer to the product manual for detailed safety information and usage guidelines.