Sweetcrispy Ergonomic Mesh Office Chair

Važne informacije o sigurnosti

Molimo vas da pažljivo pročitate sva uputstva prije sastavljanja i upotrebe. Sačuvajte ovaj priručnik za buduću upotrebu.

• Nemojte stajati na stolici.
• Ne koristite stolicu kao stepenicu.
• Ensure all bolts and screws are tightened securely before use. Re-tighten periodically.
• Do not use if any parts are missing, damaged, or worn. Contact customer support for replacement parts.
• Maksimalna nosivost: 250 kg.
• Držite djecu dalje od pokretnih dijelova tokom sastavljanja i podešavanja.

Sadržaj paketa

Prije početka montaže provjerite da li su sve komponente prisutne:

• A: Backrest (x1)
• B: Seat (x1)
• C: Armrests (Left x1, Right x1)
• D: Mechanism (x1)
• E: Gas Lift (x1)
• F: Base (x1)
• G: Legs (x5)
• H: Casters (x5)
• I: Bolts (x4)
• J: Bolts (x6)
• K: Bolts (x10)
• L: Bolts (x4)
• M: Wrench (x1)

Uputstva za sastavljanje

Za vizualni vodič, pogledajte video o sastavljanju ispod.

1. Sastavite bazu stolice:
   Turn the Base (F) upside down. Insert the 5 Legs (G) into the Base one by one. Use the Wrench (M) to secure each leg with 2 Bolts (K), for a total of 10 Bolts (K).
   

   Image: Illustration of attaching the legs to the chair base.

2. Pričvrstite kotačiće:
   Press the 5 Casters (H) into the holes at the end of each Leg (G). Ensure they are firmly seated.
   

   Image: Close-up of a caster being inserted into a leg.
3. Umetnite plinski lift:
   Insert the Gas Lift (E) into the center hole of the assembled Base (F).
   

   Image: The gas lift being placed into the central opening of the chair base.

4. Pričvrstite naslone za ruke na naslon:
   Using the Wrench (M), install the Armrests (C) (1L and 1R, marked accordingly) to both sides of the Backrest (A) with 4 Bolts (I). Napomena: Tighten these bolts only 50% at this stage.
   

   Image: A person attaching an armrest to the mesh backrest.

5. Pričvrstite naslone za ruke na sjedište:
   Turn the Seat (B) upside down. Using the Wrench (M), attach the Armrests (C) (already connected to the backrest) to the Seat (B) with 6 Bolts (J). Ensure the "FRONT" marking on the seat is facing the correct direction. Tighten these bolts 100%.
6. Attach the Mechanism:
   Make sure the "FRONT" direction of the Mechanism (D) and the Seat (B) are aligned. Using the Wrench (M), attach the Mechanism (D) to the Seat (B) with 4 Bolts (L). Tighten these bolts 100%.
   

   Image: The chair mechanism being screwed into the bottom of the seat.
7. Final Tightening and Assembly:
   Using the Wrench (M), 100% tighten the previously installed 4 Bolts (I) on the Armrests (C) x1L x1R. Align the hole on the Mechanism (D) with the Gas Lift (E), and press the chair down until it is fully secured.

Uputstvo za upotrebu

Your Sweetcrispy office chair offers several adjustable features for optimal comfort.

• Podešavanje visine sjedišta: Locate the pneumatic adjustment lever under the seat. Pull the lever up to raise the seat. Sit on the chair and pull the lever up to lower the seat. The seat height can be adjusted from 18.5 to 22.2 inches.
  

  Image: Diagram illustrating the seat height adjustment lever.

• Rocking Mode: The chair features a 90-120 degree rocking mode. Use the lever under the seat to engage or disengage the rocking function. Adjust the tension control knob for desired rocking resistance.
  

  Image: Visual representation of the chair's rocking function and tension adjustment.

• Ergonomska lumbalna podrška: The backrest is designed with prominent lumbar support to fit the natural curvature of your spine, promoting a relaxed posture.
  

  Image: Close-up of the chair's backrest highlighting the lumbar support area.
• Space-Saving Armrests: The armrests are designed to allow the chair to be pushed closer to a desk, saving space when not in use.
  

  Image: The chair positioned under a desk, demonstrating its space-saving armrest design.

• Glatko kretanje: The multi-direction casters allow for effortless movement across various floor types, including tile, wood, and carpet.

Održavanje

To ensure the longevity and appearance of your Sweetcrispy office chair, follow these simple maintenance guidelines:

• čišćenje: Obrišite oglasomamp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the mesh and fabric.
• Redovni pregled: Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• Njega kotačića: Održavajte kotačiće čistim od dlaka i ostataka kako biste osigurali glatko kotrljanje.

Rješavanje problema

Ako naiđete na bilo kakve probleme sa svojom stolicom, pogledajte sljedeća uobičajena rješenja:

• Škripanje stolice: Check all bolts and screws for tightness. Apply a small amount of silicone lubricant to moving parts if necessary.
• Teškoće s podešavanjem visine: Ensure the gas lift lever is fully engaged or disengaged. If the issue persists, the gas lift may need replacement.
• Chair Does Not Roll Smoothly: Inspect casters for trapped debris (hair, lint) and clean them thoroughly. Ensure casters are fully inserted into the base.
• Stolica se čini nestabilnom: Verify that all legs are securely attached to the base and all bolts are tightened. Ensure the chair is on a flat, even surface.

If these steps do not resolve the issue, please contact Sweetcrispy customer support.

Specifikacije

Image: Two Sweetcrispy Ergonomic Mesh Office Chairs in a modern office environment.

Image: Detailed product dimensions and 250 lbs weight capacity for the Sweetcrispy office chair.

Garancija i podrška

For warranty information or technical support, please refer to the product packaging or contact Sweetcrispy customer service directly. Keep your purchase receipt for any warranty claims.