Philips 7600101053

Philips 72W 7400LM LED sigurnosna lampa sa PIR senzorom pokreta - uputstvo za upotrebu

Model: 7600101053

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Philips 72W 7400LM LED Security Light. Please read this manual thoroughly before installation and retain it for future reference. This LED security light is designed for outdoor use, offering high brightness, adjustable heads, and a PIR motion sensor for enhanced security and convenience.

Philips 72W 7400LM LED Security Light with packaging

Image: Philips 72W 7400LM LED Security Light with its product packaging.

2. Sigurnosne informacije

Pridržavajte se sljedećih sigurnosnih mjera opreza tokom instalacije i rada:

  • električna sigurnost: Always turn off power at the circuit breaker before installing or servicing the fixture. Ensure proper grounding to avoid electrical shock.
  • Kvalifikovani električar: Ako niste sigurni u postupak instalacije, obratite se kvalificiranom električaru.
  • Montažna površina: Mount the fixture securely to a structurally sound surface that can support its weight.
  • Operating Voltage: This fixture is designed for 120 Volts. Ensure your electrical supply matches this requirement.
  • toplina: LED lights generate heat. Ensure adequate ventilation around the fixture. Do not cover the fixture with insulating material.
  • Zaštita očiju: Avoid looking directly into the LED light source when illuminated, as it can cause eye strain or damage.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

  • LED Lens (Integrated with fixture)
  • Uputstvo za upotrebu (ovaj dokument)
  • Mounting Hardware (Includes mounting screws, wire nuts, mounting plate, rubber plug, gasket)
Diagram showing the Philips security light dimensions and included accessories

Image: The security light with its dimensions (11.22 in L x 4.33 in W x 9.25 in H) and a list of included accessories: 2 mounting screws, 3 wire nuts, 1 mounting plate, 1 rubber plug, 1 gasket, and 2 additional mounting screws.

4. Značajke proizvoda

  • High Brightness and Wide Coverage: Produces 7400 lumens of 5000K cool white daylight. Three rotatable heads allow for a wide and customizable coverage area.
  • Četiri režima osvetljenja: Includes Test mode, Security mode (with adjustable sensing range and light-on time), Dusk-to-Dawn mode, and Manual Override mode (always-on at 80% brightness for up to 6 hours).
  • Visokoosjetljivi senzor pokreta: Passive infrared (PIR) motion sensor detects motion up to 69 ft away over a 180° angle. Light-on time can be set for 1, 3, or 10 minutes.
  • Durable Material and Excellent Heat Dissipation: Constructed with a durable aluminum body and unique rear heat dissipation fins for efficient thermal management and optimal performance.
  • Vodootporan: Tested for resistance to corrosion, rust, heavy rain, humidity, UV exposure, and extreme temperatures, ensuring reliable outdoor performance.
Infographic highlighting key features of the Philips security light: durable housing, high brightness, dusk-to-dawn operation, adjustable heads, water-resistant, and corrosion-free.

Image: An infographic illustrating the key features of the Philips security light, including its durable housing, high brightness, dusk-to-dawn functionality, adjustable light heads, water resistance, and corrosion-free design.

Image showing the three adjustable heads of the Philips security light, with arrows indicating their range of motion.

Image: The security light with its three adjustable heads, demonstrating how each head can be angled individually to direct light where needed.

5. Instalacija

This fixture is designed for hardwired installation. A junction box is not included.

5.1 Opcije montaže

The security light can be mounted on a wall or under an eave.

  • Montaža na zid: Secure the fixture directly to a vertical wall surface.
  • Montaža na strehu: Secure the fixture to a horizontal eave surface. Note that eave mounting may slightly reduce the motion sensor's sensing range.

To enhance water resistance, ensure a tight seal between the mounting surface and the luminaire.

Image showing two mounting options for the Philips security light: wall mounting and eave mounting.

Image: Illustrations demonstrating the two possible mounting methods: directly on a wall or underneath an eave.

5.2 Koraci instalacije

Recommended installation height: 8.2 feet.

  1. Pripremite ožičenje: Turn off power at the circuit breaker. Remove the existing fixture (if any) and expose the electrical wires from the junction box.
  2. Pričvrstite montažnu ploču: Pričvrstite montažnu ploču na razvodnu kutiju pomoću priloženih vijaka.
  3. Spojite žice: Connect the fixture's wires to your household wiring using the provided wire nuts: Black to Black (Live), White to White (Neutral), and Green/Bare Copper to Green/Bare Copper (Ground).
  4. Učvršćenje: Carefully push the wired fixture onto the mounting plate and secure it with the remaining mounting screws. Ensure the gasket is properly seated for a weather-tight seal.
  5. Podesite glave: Adjust the three light heads and the motion sensor to your desired angles.
Diagram showing four steps for easy installation of the Philips security light.

Image: A four-step diagram illustrating the installation process: 1) Attaching the mounting bracket, 2) Wiring connections (ground, live, neutral), 3) Securing the fixture, and 4) Final adjustment. The recommended installation height is 8.2 feet.

6. Uputstvo za upotrebu

The security light features a motion sensor with adjustable settings and four distinct lighting modes.

6.1 Podešavanje senzora pokreta

The motion sensor has two adjustable dials: UDALJENOST (sensing range) and VRIJEME (light-on duration).

  • DISTANCE (Sensing Range):
    • L (nisko): 0-32 ft
    • M (srednji): 0-49 ft
    • H (visoko): 0-69 ft
  • TIME (Activated Lighting Time):
    • 1 MIN: Svjetlo ostaje upaljeno 1 minutu nakon detekcije pokreta.
    • 3 MIN: Svjetlo ostaje upaljeno 3 minute nakon detekcije pokreta.
    • 10 MIN: Svjetlo ostaje upaljeno 10 minute nakon detekcije pokreta.
Close-up of the motion sensor dials for adjusting sensing range and activated lighting time.

Slika: Detaljna view of the motion sensor's control dials, labeled 'DISTANCE' and 'TIME', with corresponding settings for sensing range (L, M, H) and light duration (1 MIN, 3 MIN, 10 MIN).

Diagram illustrating the motion sensor's 180-degree detection angle and maximum sensing range of 69 feet.

Image: An illustration showing the motion sensor's 180-degree detection angle and a maximum sensing range of 69 feet, with a dog playing in the yard as an example of motion detection.

6.2 režima osvetljenja

The fixture offers four operational modes:

  • Način ispitivanja:
    • Can be activated in both daytime and nighttime.
    • When motion is detected, the light turns on for 5 seconds at 100% brightness. No motion: stays off.
    • Useful for testing the sensor's coverage area after installation.
  • Sigurnosni način rada (senzorski način rada):
    • Can only be activated in the nighttime.
    • When motion is detected, the light turns on at 100% brightness for the set duration (1, 3, or 10 minutes). No motion: stays off.
  • Način rada od sumraka do zore:
    • Can only be activated in the nighttime.
    • At dusk, the light automatically turns on at 20% brightness. When motion is detected, it switches to 100% brightness for the set duration, then returns to 20%. At dawn, the light turns off.
  • Ručni način rada:
    • Can be activated in both daytime and nighttime.
    • Provides continuous light at 80% brightness for a maximum of 6 hours.
Infographic explaining the four lighting modes: Test, Sensor, Dusk-to-Dawn, and Override.

Image: An infographic detailing the functionality of the four lighting modes: Test mode (5-second activation), Sensor mode (1/3/10 minute activation), Dusk-to-Dawn mode (20% ambient, 100% on motion), and Override mode (6-hour continuous at 80%).

6.3 Aktiviranje/deaktiviranje ručnog načina premošćivanja

  • Za aktiviranje: Switch the light OFF and ON two times within 3 seconds. The light will activate 6-hour always-on mode at 80% brightness. It will automatically dim to 80% after 13 minutes if initially at 100%.
  • Za deaktivaciju: Switch the light OFF and ON once for more than 3 seconds. The light will return to sensor mode. It will also automatically return to sensor mode after 6 hours.
Diagram showing how to activate and deactivate the manual override mode for the Philips security light.

Image: Illustrations demonstrating the process to activate (OFF-ON-OFF-ON within 3 seconds) and deactivate (OFF-ON for more than 3 seconds) the manual override mode, which provides 6 hours of continuous light at 80% brightness.

7. Održavanje

Regular maintenance ensures optimal performance and longevity of your security light.

  • čišćenje: Povremeno čistite uređaj mekom krpomamp krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti završnu obradu ili električne komponente.
  • inspekcija: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. Address any issues promptly.
  • LED: The LED light source is integrated and not user-replaceable. Do not attempt to open the light heads.

8. Otkrivanje problema

Pogledajte donju tabelu za uobičajene probleme i njihova rješenja:

ProblemMogući uzrokRješenje
Svjetlo se ne pali.No power supply. Incorrect wiring. Sensor not detecting motion. Dusk-to-dawn mode active during daytime.Check circuit breaker. Verify wiring connections. Adjust sensor sensitivity/angle. Wait for nighttime or switch to Test/Manual Override mode.
Svjetlo ostaje stalno uključeno.Manual Override mode active. Constant motion in sensor range. Sensor malfunction.Deactivate Manual Override mode (OFF-ON for >3s). Adjust sensor range or reposition fixture. Contact customer support if issue persists.
Svjetlo treperi ili treperi.Unstable power supply. Loose wiring connection. Faulty fixture.Check power supply stability. Re-check all wiring connections. If issue persists, contact customer support.
Domet senzora pokreta je prekratak/preveliki.DISTANCE dial setting incorrect. Obstructions.Adjust the 'DISTANCE' dial on the sensor. Ensure no obstructions block the sensor's view.
Light turns off too quickly/slowly.TIME dial setting incorrect.Adjust the 'TIME' dial on the sensor to 1, 3, or 10 minutes.

9. Specifikacije

SpecifikacijaDetalj
BrandPhilips
Broj modela7600101053
Izvor napajanjaCorded Electric
Wattage72 vati
Osvetljenost7400 lumena
Light Color5000 Kelvina (dnevno bijelo)
Voltage120 Volts
MaterijalAluminijum, Plastika
Dimenzije proizvoda11.22 cm D x 4.33 cm Š x 9.25 cm V
Težina artikla2.42 funte
Unutrašnja/vanjska upotrebaNa otvorenom
Nivo vodootpornostiOtporan na vodu
Posebne karakteristikeAdjustable Head, Anti-Rust, Motion Sensor, Water-resistant
UPC046677607555

10. Garancija i podrška

For warranty information or technical support, please refer to the Philips official webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte račun kao dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.