GODOX IM30

Godox IM30 uputstvo za upotrebu blica kamere

Model: IM30 | Brand: GODOX

1. Uvod

The Godox IM30 Camera Flash is a compact and portable manual flash designed to provide enhanced lighting for various camera models. Weighing only 78 grams, it fits easily into your pocket or attaches directly to your camera's hot shoe. It offers 7 adjustable power levels and a guide number of 15 (ISO 100, meters), delivering brighter and more natural fill light than most built-in camera flashes. The iM30 is powered by two AAA batteries, ensuring you're always ready to capture the moment.

Godox IM30 Camera Flash with light burst and smaller images of its back and bottom, and mounted on a camera.

Figure 1: Godox IM30 Camera Flash overview.

2. Šta se nalazi u kutiji

  • IM30 Flash

(Note: AAA batteries are sold separately and are required for operation.)

3. Podešavanje

3.1 Instalacija baterije

The iM30 flash requires two AAA batteries for operation. Ensure the batteries are inserted with the correct polarity as indicated inside the battery compartment.

  1. Pronađite odjeljak za bateriju sa strane blica.
  2. Otvorite poklopac odeljka za baterije.
  3. Insert two AAA batteries, matching the positive (+) and negative (-) terminals with the markings.
  4. Čvrsto zatvorite poklopac odeljka za baterije.
Hand inserting a purple AAA battery into the Godox IM30 flash unit.

Figure 2: Proper battery insertion for the Godox IM30.

3.2 Montiranje na kameru

The Godox IM30 features a single-contact hot shoe design for wide compatibility with most mirrorless and film cameras. To mount the flash:

  1. Provjerite je li vaša kamera isključena.
  2. Slide the flash unit onto your camera's hot shoe mount until it clicks into place.
  3. Tighten the locking ring or lever (if present on your camera's hot shoe) to secure the flash.
Godox IM30 flash mounted on a camera, viewed sa strane.

Figure 3: Godox IM30 mounted on a camera.

Multiple cameras from different brands (Canon, Nikon, Sony, Fujifilm, Pentax, Olympus) with the Godox IM30 flash mounted, demonstrating wide compatibility.

Figure 4: The Godox IM30 is compatible with a wide range of cameras.

4. Upravljanje blicem

4.1 Uključivanje/isključivanje

To power on the flash, simply turn on your camera. The flash will automatically activate when mounted correctly. To power off, turn off your camera or remove the flash unit.

4.2 Podešavanje nivoa snage

The Godox IM30 offers 7 power levels, from 1/64 (lowest) to Full (highest). Adjust the power level using the rotary dial on the top of the flash unit. This allows you to fine-tune the flash output based on your camera's aperture, shooting distance, and ISO sensitivity.

A hand adjusting the power level dial on the Godox IM30 flash unit.

Figure 5: Adjusting the flash power level.

4.3 S1/S2 Optical Slave Modes

The iM30 includes S1 and S2 optical slave modes, indicated by lights. These modes allow the iM30 to fire in sync with another flash unit.

  • S1 način rada: The flash will fire in response to the first flash from a master flash. This is suitable for manual flash units.
  • S2 način rada: The flash will ignore the pre-flash (if any) from a TTL master flash and fire in response to the main flash. This is suitable for TTL flash units.

If the indicator light for S1 or S2 is on, the corresponding light-controlled flash function is active. If the light is off, the function is deactivated.

Top view of the Godox IM30 flash showing the S1/S2 mode buttons and power dial.

Figure 6: S1/S2 mode indicators.

4.4 Natural Lighting and Performance

With a guide number of 15 (ISO 100, meters), the iM30 provides brighter, more natural fill light compared to many built-in camera flashes, enhancing the quality of your photographs. A single charge of two AAA batteries can last for up to 230 full-power flashes.

A person taking a photo with the Godox IM30 flash, illustrating natural lighting.

Figure 7: The Godox IM30 provides natural fill light.

A person using the Godox IM30 flash, with an overlay indicating approximately 230 full power flashes per charge.

Figure 8: Up to 230 full-power flashes on a single charge.

4.5 Video o proizvodu

Video 1: Official product video demonstrating the Godox IM30 Camera Flash features and usage.

5. Održavanje

  • Keep the flash unit dry. Do not expose it to moisture or rain.
  • Clean the flash surface with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Kada se ne koristi duži period, izvadite baterije kako biste spriječili curenje.
  • Čuvajte blic na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

6. Otkrivanje problema

ProblemMogući uzrokRješenje
Blic se ne aktivira.
  • Baterije su prazne ili nepravilno umetnute.
  • Flash not securely mounted on hot shoe.
  • Camera not turned on.
  • Zamijenite baterije ili provjerite polaritet.
  • Re-mount flash securely.
  • Uključi kameru.
Izlaz blica je preslab/prejak.
  • Power level set incorrectly.
  • Camera settings (ISO, aperture) not optimized.
  • Adjust the power level dial.
  • Adjust camera ISO or aperture to match lighting conditions.
Flash not syncing with other flashes (S1/S2).
  • Incorrect S1/S2 mode selected.
  • Obstruction between flashes.
  • Ensure correct S1/S2 mode is active (check indicator light).
  • Ensure clear line of sight between flashes.

7. Specifikacije

FeatureDetalj
ModelIM30
Vodič broj15 (ISO 100, metara)
Nivoi snage7 (1/64 to Full)
Optical Slave ModesS1, S2
Izvor napajanja2 x AAA baterije (prodaju se zasebno)
Bljeskovi pune snagePribl. 230
Težina artikla7.7 unce
Dimenzije proizvoda0.94 x 0.7 x 0.81 inča
Kompatibilni nosačiCanon, Sony, Nikon, Pentax, Panasonic, Olympus
Brzina sinhronizacije blica1/200

8. Garancija i podrška

Za informacije o garanciji i tehničkoj podršci, molimo Vas da se obratite službenom GODOX-u. webstranicu ili kontaktirajte lokalnog distributera. Sačuvajte račun kao dokaz o kupovini za bilo kakve reklamacije u garanciji.

Za dodatnu pomoć, možete posjetiti GODOX trgovina na Amazonu.

© 2025 GODOX. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.