Riokko OBD2 Scanner Color Screen Code Reader

1. Proizvod je gotovview

The Riokko YM119 OBD2 Scanner is a diagnostic tool designed for car owners to easily read and clear engine fault codes. It provides real-time data, freeze frame information, and supports various diagnostic functions for OBDII/EOBD compliant vehicles manufactured since 1996. Its intuitive interface and compact design make it suitable for both professional technicians and home users.

Figure 1.1: Riokko YM119 OBD2 Scanner. This image shows the main diagnostic tool with its color screen, control buttons, and the attached OBDII connector cable.

2. Postavljanje i početna upotreba

2.1 Sadržaj paketa

• Riokko YM119 OBD2 Scanner Unit
• Korisnički priručnik (ovaj dokument)

2.2 Povezivanje skenera

1. Locate the vehicle's Data Link Connector (DLC). This is typically located under the dashboard on the driver's side.
2. Ensure the vehicle's ignition is turned ON (engine can be off or running, depending on the test).
3. Plug the OBDII connector of the YM119 scanner firmly into the vehicle's DLC. The scanner will power on automatically.

2.3 Odabir jezika

The YM119 supports 13 national languages. To change the language:

1. From the main menu, navigate to "Setting" using the arrow keys.
2. Pritisnite OK button to enter the Setting menu.
3. Odaberite "Jezik" i odaberite željeni jezik s liste.
4. Pritisnite OK da potvrdite svoj izbor.

3. Upravljanje skenerom

3.1 Dugmad za navigaciju

• IZLAZ: Returns to the previous screen or main menu.
• Strelice GORE/DOLJE: Krećite se kroz opcije menija.
• Strelice LIJEVO/DESNO: Navigate through data screens or adjust settings.
• UREDU: Confirms selection or enters a submenu.
• BAT: Initiates the battery voltage test.

Figure 3.1: Main Menu and Professional Functions. This image illustrates the scanner's main menu interface and highlights its key diagnostic capabilities such as Engine Fault Diagnostics, Quick Clear Fault Code, Real-time Data Stream, and Battery Life Test.

3.2 Dijagnostičke funkcije

From the main menu, select "Diagnosis" to access the primary diagnostic functions.

Figure 3.2: OBD II Diagnostic Test Items. This image shows the comprehensive list of diagnostic tests available on the scanner, from reading and erasing codes to advanced sensor and component tests.

3.2.1 Čitanje kodova

This function retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's computer. These codes indicate specific issues detected by the vehicle's onboard diagnostic system.

1. Select "Read Codes" from the Diagnosis menu.
2. The scanner will display any stored, pending, or permanent DTCs.
3. Koristite GORE/DOLJE arrows to scroll through the codes.
4. For detailed information on a specific code, use the "DTC Lib" function or refer to a reliable automotive repair database.

3.2.2 Brisanje kodova

This function erases DTCs from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL), poznata i kao lampica za provjeru motora. Note: Clearing codes does not fix the underlying problem. The MIL will illuminate again if the fault persists.

Figure 3.3: Check and Turn Off Engine Light. This image demonstrates the scanner's ability to diagnose and clear engine fault codes, effectively turning off the Check Engine Light on the vehicle's dashboard.

1. Select "Erase Codes" from the Diagnosis menu.
2. Potvrdite radnju kada se to od vas zatraži.
3. The MIL should turn off.

3.2.3 Real-time Data (Live Data Stream)

View real-time sensor data from the vehicle's engine control unit (ECU). This data can be displayed in text or graphical format, allowing for dynamic monitoring of vehicle performance.

Figure 3.4: Real-time Data Stream. This image shows the scanner's capability to display live engine data, including various sensor readings and their corresponding real-time curves, aiding in dynamic vehicle diagnostics.

1. Select "Live Data" or "Realtime Curve" from the Diagnosis menu.
2. Koristite GORE/DOLJE arrows to scroll through different data parameters.
3. Koristite LIJEVO/DESNO arrows to switch between text and graph views (if available for the parameter).

3.2.4 Podaci zamrznutog kadra

When an emission-related fault occurs, the vehicle's computer records a snapshot of operating conditions at the time of the fault. This "freeze frame" data helps in diagnosing intermittent problems.

Slika 3.5: View Freeze Frame and DTCs. This image displays the scanner's ability to capture and show freeze frame data, which provides a snapshot of engine conditions at the moment a fault code was set, aiding in diagnosis.

1. Odaberite "View Freeze Frame" from the Diagnosis menu.
2. Review the recorded parameters.

3.2.5 DTC Query (DTC Lib)

The built-in DTC Library allows you to look up definitions for generic (P0, P2, P34, B0, C0, U0) and manufacturer-specific (P1, P30-P33, B1, C1, U1) codes.

1. From the main menu, select "DTC Lib".
2. Enter the DTC code using the arrow keys and OK dugme.
3. The scanner will display the definition of the code.

3.2.6 Spremnost za I / M

This function checks the readiness of the emission-related monitoring systems on the vehicle. It's useful for determining if the vehicle is ready for an emissions test.

1. Select "I/M Readiness" from the Diagnosis menu.
2. The scanner will display the status of various monitors (e.g., Misfire Monitor, Fuel System Monitor). "OK" indicates the monitor has completed its test, "INC" indicates incomplete, and "N/A" indicates not applicable.

3.2.7 Baterija Voltage Test

The YM119 can perform a basic battery voltage test to assess the vehicle's battery health.

Figure 3.6: Estimate Battery Life Test. This image shows the scanner's dedicated function for monitoring and assessing the vehicle's battery voltage i cjelokupno zdravlje.

1. From the main menu, select "Battery" or press the BAT dugme.
2. Skener će prikazati trenutni nivo napunjenosti baterijetage.

3.2.8 Podaci o vozilu

This function retrieves the Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN) of the vehicle.

1. Select "Vehicle Info" from the Diagnosis menu.
2. The scanner will display the available vehicle information.

4. Održavanje

4.1 Čišćenje uređaja

Da biste održali performanse i izgled skenera:

• Obrišite jedinicu mekom krpom, damp tkanina.
• Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Prije skladištenja provjerite je li uređaj suh.

4.2 Skladištenje

Store the scanner in a clean, dry environment away from extreme temperatures and direct sunlight. Keep the OBDII connector free from dust and debris.

5. Otkrivanje problema

6. Specifikacije

7. Garancija i podrška

7.1 Informacije o garanciji

The Riokko YM119 OBD2 Scanner comes with a 3 godine garancije od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi.

7.2 Politika povrata

A Politika povrata bez pitanja u roku od 30 dana is offered for your purchase. Please refer to your retailer's specific return instructions.

7.3 Korisnička podrška

For technical assistance, warranty claims, or any other inquiries, please contact Riokko customer service. 24/7 korisnička služba je dostupan da vam pomogne.

Please visit the official Riokko webweb-mjesto ili pogledajte pakovanje proizvoda za najnovije kontakt informacije.