Czgor 60 LED Stage Priručnik za upotrebu svjetla

Uvod

This manual provides detailed instructions for the safe and efficient operation of your Czgor 60 LED Stage Svjetlo. Molimo vas da prije upotrebe pažljivo pročitate ovaj priručnik i sačuvate ga za buduću upotrebu.

Image: The Czgor 60 LED Stage Svjetlo, showcasing its front LED array, included remote control, and DMX cable.

Šta je u kutiji

Prilikom otvaranja pakovanja provjerite da li su sve komponente prisutne:

• 90W Par Light x 1
• 3.2FT DMX Cable x 1
• Daljinski x 1
• Metal Stand x 2
• Vijci x 2
• Priručnik x 1

Image: All components included in the package: the 60 LED stage light, remote control, DMX cable, metal stands, and screws.

Specifikacije

Image: Detailed technical specifications and dimensions of the Czgor 60 LED Stage Svjetlo.

Setup

1. Attach the Metal Stand: Secure the two metal stands to the sides of the light using the provided screws. Ensure they are tightened for stability.
2. plasman: The 360° adjustable brackets allow for flexible placement. Position the light on a table, floor, wall, or ceiling as required. Ensure the light is stable and securely mounted to prevent accidental falls.
3. Priključak za napajanje: Connect the power cord to the light and then to a standard 110V AC power outlet.
4. DMX veza (opciono): If using DMX control, connect the provided 3.2FT DMX cable from your DMX controller to the DMX IN port on the light. For multiple lights, connect them in a daisy chain from DMX OUT to DMX IN.

Image: The Czgor 60 LED Stage Light with its dimensions and all accessories laid out, illustrating the components for setup.

Radni režimi

1. Operacije daljinskog upravljača

The included wireless remote control allows for convenient adjustment of lighting effects and colors.

1. Uključivanje/isključivanje: Press the "ON/OFF" button to power the light on or off.
2. Izbor boja: Use the R (Red), G (Green), B (Blue), W (White), Y (Yellow), PK (Pink), UV (Ultraviolet) buttons to select a static color. To change colors, first turn off the current color by pressing its button again, then select a new color.
3. Načini osvjetljenja:
   • JUMP Mode: Boje se naglo mijenjaju.
   • FADE Mode: Boje se glatko prelijevaju.
   • PLUSE Mode: Colors pulse.
   • FLASH Mode: Colors flash rapidly.
   • SOUND Mode: Light effects react to sound.
4. Podešavanje svjetline/brzine: Use the "Speed +" and "Speed -" buttons to adjust the speed of dynamic modes or the brightness of static colors.
5. Half/Turn-On/Turn-Off: These buttons control brightness levels or turn off specific color channels.

Image: The remote control for the Czgor 60 LED Stage Light, highlighting buttons for power, color selection, and various lighting modes.

Image: A detailed diagram of the remote control, labeling each button and its corresponding function for controlling the light.

2. Rad na kontrolnoj tabli

The rear control panel provides direct access to settings and modes.

• MENI: Press to cycle through different operating modes (e.g., DMX, Auto, Sound Active).
• GORE DOLJE: Use these buttons to navigate options or adjust values within a selected mode.
• ENTER: Confirm your selection or setting.
• Digitalni prikaz: Shows the current mode or value.

Image: A labeled diagram of the light's rear control panel, indicating the digital display, menu navigation buttons, DMX input/output, and cooling fan.

3. DMX kontrola

For advanced control, connect the light to a DMX512 controller using the DMX IN/OUT ports.

• Postavka DMX adrese: Use the control panel to set the DMX address for each light. Refer to the DMX Description table for channel values.
• Funkcije kanala: The light utilizes 7 DMX channels for various functions including total dimming, individual RGB color control, strobe effects, program selection (jump, gradual, pulse, voice control), and speed adjustment.

Image: A table outlining the 7 DMX channels and their corresponding functions and value ranges for controlling the Czgor 60 LED Stage Svjetlo.

Održavanje

• čišćenje: Regularly clean the lens and exterior with a soft, dry cloth to maintain optimal light output. Do not use harsh chemicals or abrasive materials.
• ventilator za hlađenje: Ensure the built-in cooling fan is free from dust and obstructions to prevent overheating.
• Skladištenje: Kada se ne koristi, lampu čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Inspekcija kablova: Periodically check power and DMX cables for any signs of wear or damage. Replace damaged cables immediately.

Rješavanje problema

Garancija i podrška

For any questions or support needs regarding your Czgor 60 LED Stage Light, please refer to the contact information provided with your purchase or visit the official Czgor website. Sačuvajte račun o kupovini za reklamacije.