Troy Lighting Tristan 12-Light Semi-Flush Mount

Uvod

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your Troy Lighting Tristan 12-Light Semi-Flush Mount fixture, Model C2812-PBR. Please read all instructions carefully before beginning installation and retain this manual for future reference.

This image displays the complete Troy Lighting Tristan 12-Light Semi-Flush Mount fixture. It features a central brass canopy that attaches to the ceiling, with twelve radiating arms of varying lengths, each terminating in a bulb socket. The fixture has a modern, sputnik-like design, showcasing its brass finish and the arrangement of its light sources.

Sigurnosne informacije

UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na kutiji s osiguračima ili prekidaču prije instalacije ili servisiranja.

• Svi električni priključci moraju biti u skladu s lokalnim propisima, uredbama ili Nacionalnim električnim kodeksom (NEC). Posavjetujte se s kvalificiranim električarem ako niste upoznati s pravilnim spajanjem električnih instalacija.
• Ovaj uređaj je namijenjen samo za upotrebu u zatvorenom prostoru.
• Osigurajte da površina za montažu može podnijeti težinu uređaja.
• Nemojte prekoračiti maksimalnu snagutage specified for each bulb socket.
• Nosite zaštitne naočale i rukavice tokom instalacije.
• Never connect the fixture to a power source while it is still in the packaging.

Sadržaj paketa

Prije odlaganja ambalažnog materijala provjerite da li su sve komponente prisutne.

• Fixture Body (with pre-attached arms and wiring)
• Mounting Plate/Crossbar
• Montažni vijci i matice za žicu
• Uputstvo za upotrebu

Napomena: Light bulbs are not included and must be purchased separately. This fixture requires 12 incandescent bulbs, maximum 60 watts each.

Alati su potrebni

• Odvijač za glavu Phillips
• Odvijač s ravnom glavom
• Skidači žice
• Električna traka
• Ljestve (ako je potrebno)
• Zaštitne naočale

Postavljanje i instalacija

Follow these steps carefully to install your semi-flush mount fixture.

1. Isključite napajanje: Locate the circuit breaker or fuse box that supplies power to the fixture location. Turn off the main power switch. Verify power is off using a voltage tester.
2. Pripremite se za instalaciju: Carefully unpack the fixture and its components. Lay them out on a clean, soft surface to prevent scratches.
3. Instalirajte montažnu ploču: Attach the mounting plate (crossbar) to the electrical junction box in the ceiling using the provided mounting screws. Ensure it is securely fastened.
4. Napravite električne veze:
   • Povežite crna žicu od uređaja do crna (vruću) žicu iz razvodne kutije pomoću žičane matice.
   • Povežite bijela žicu od uređaja do bijela (neutralnu) žicu iz razvodne kutije pomoću žičane matice.
   • Povežite tlo žica (gola bakrena ili zelena) od uređaja do tlo žicu iz razvodne kutije (ili do zelenog vijka za uzemljenje na montažnoj ploči) pomoću žičane matice.
   • Ensure all wire nuts are tightly secured and wrap connections with electrical tape for added safety.
5. Montirajte uređaj: Carefully tuck all wires into the junction box. Align the fixture's canopy with the mounting plate and secure it using the provided screws or nuts, ensuring it sits flush against the ceiling.
6. Instalirajte žarulje: Screw the appropriate incandescent bulbs (max 60W each) into the 12 sockets. Do not overtighten.

Detaljno view of the Troy Lighting Tristan fixture, focusing on several of its brass-finished arms and the white, spherical bulbs installed in their sockets. This close-up highlights the construction of the arms and the connection points for the bulbs, providing a clearer look at the fixture's material and design elements.

Važno: After installation, restore power at the circuit breaker and test the fixture.

Uputstvo za upotrebu

The Troy Lighting Tristan fixture operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

Održavanje

Čišćenje

To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. Avoid spraying cleaners directly onto the fixture.

Zamjena žarulje

Before replacing bulbs, turn off the power to the fixture at the circuit breaker and allow bulbs to cool completely. Unscrew the old bulb and screw in a new incandescent bulb (max 60W). Ensure the replacement bulb matches the specified wattage za sprečavanje pregrijavanja.

Rješavanje problema

Specifikacije

Garancija

This Troy Lighting fixture is covered by a Ograničena garancija proizvođača od 1 godine od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Ne pokriva štetu nastalu nepravilnom instalacijom, nezgodom, pogrešnom upotrebom, zloupotrebom ili neovlaštenim modifikacijama. Molimo sačuvajte dokaz o kupovini za reklamacije u slučaju garancije.

Podrška

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Troy Lighting customer support. For the most up-to-date contact information, please visit the official Troy Lighting webweb-mjesto ili pogledajte dokumentaciju o kupovini.

When contacting support, please have your model number (C2812-PBR) and proof of purchase readily available.