Ideal Standard Ceraplan Single-Lever Basin Mixer (Model BD227AA)

1. Proizvod je gotovview

The Ideal Standard Ceraplan single-lever basin mixer is designed for bathroom sinks, featuring a fixed spout and a 5 liter per minute aerator for water efficiency. It includes a M24x1 aerator, an exhaust control rod, and a 1-1/4" waste. The mixer is equipped with a 38 mm cartridge with an EKO system, contributing to water saving. Its spout height is 88 mm, and it utilizes the Easy Fix+ system for straightforward installation. The finish is chrome.

Slika 1: Bočna strana view of the Ideal Standard Ceraplan Single-Lever Basin Mikser.

Ključne karakteristike:

• Single-lever operation for precise control of water flow and temperature.
• Integrated 5 l/min aerator for reduced water consumption.
• Fixed spout design.
• M24x1 aerator and 1-1/4" waste with control rod.
• 38 mm ceramic cartridge with EKO system.
• 88 mm spout height.
• Easy Fix+ installation system.
• Durable chrome finish.

2. Sigurnosne informacije

Molimo vas da pažljivo pročitate sva uputstva prije instalacije i upotrebe. Nepoštivanje ovih uputstava može dovesti do materijalne štete ili tjelesnih povreda.

• Prije početka bilo kakve instalacije ili održavanja provjerite je li glavni dovod vode isključen.
• Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom vodoinstalateru.
• Ne koristite abrazivna sredstva za čišćenje ili jake hemikalije na hromiranoj površini, jer to može oštetiti površinu.
• Protect the product from freezing temperatures, which can cause damage to internal components.
• Držite male dijelove van domašaja djece.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne.

• 1 x Ideal Standard Ceraplan Single-Lever Basin Mikser
• 1 x Set of flexible connection hoses
• 1 x Easy Fix+ mounting kit (gasket, washer, nut)
• 1 x 1-1/4" Waste with control rod
• 1 x Uputstvo za upotrebu

4. Postavljanje i instalacija

This section provides general guidelines for installing your basin mixer. For detailed steps, refer to the technical drawing and consult a professional if needed.

Potrebni alati (nisu uključeni):

• Podesivi ključ
• Odvijač
• Zaptivna traka (PTFE traka)
• Basin wrench (optional)

Koraci instalacije:

1. Pripremite Basin: Ensure the mounting hole on your basin is clean and free of debris. The mixer requires a single mounting hole.
2. Install the Mixer: Place the mixer onto the basin, ensuring the base gasket is correctly positioned.
3. Osigurajte mikser: Ispod basin, slide the washer and then the fixing nut onto the threaded rod of the mixer. Tighten the nut securely using the Easy Fix+ system to prevent movement.
4. Spojite crijeva za vodu: Attach the flexible hot and cold water supply hoses to the corresponding inlets on the mixer. Use sealant tape on the threads for a watertight seal. Connect the other ends of the hoses to your hot and cold water supply lines.
5. Install the Waste: Assemble the 1-1/4" waste according to its separate instructions, ensuring all seals are correctly placed. Insert the waste into the basin's drain hole and secure it from underneath. Connect the control rod to the mixer's lever mechanism.
6. Test na curenje: Slowly turn on the main water supply. Check all connections for leaks. If leaks occur, tighten connections as necessary.
7. Ispiranje sistema: Run both hot and cold water through the mixer for a few minutes to flush out any debris from the new installation.

Figure 2: Technical drawing with dimensions and installation components.

5. Uputstvo za upotrebu

The Ideal Standard Ceraplan basin mixer features a single lever for intuitive control.

• Kontrola protoka vode: Podignite polugu prema gore da biste povećali protok vode. Pritisnite je prema dolje da biste smanjili protok i isključili vodu.
• Kontrola temperature: Pomaknite polugu lijevo za toplu vodu, a desno za hladnu vodu. Podesite položaj između lijeve i desne strane kako biste postigli željenu temperaturu vode.
• Waste Operation: Use the control rod located at the back of the mixer to open and close the basin waste. Pull the rod up to close the waste and fill the basin; push it down to open the waste and drain the basin.

Slika 3: Vrh view of the mixer with hot (red) and cold (blue) indicators.

6. Održavanje

Regular maintenance will ensure the longevity and optimal performance of your Ideal Standard Ceraplan basin mikser.

Čišćenje miksera:

• Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome.
• Temeljno isperite čistom vodom i osušite mekom krpom kako biste spriječili mrlje od vode.
• Nemojte koristiti: Abrasive sponges, scouring pads, harsh detergents, or cleaners containing alcohol, ammonia, or phosphoric acid, as these can damage the finish.

Održavanje aeratora:

If water flow decreases or becomes uneven, the aerator may be clogged with sediment.

1. Odvrnite aerator s kraja izljeva.
2. Separate the aerator components and rinse them under running water.
3. Use a soft brush or toothpick to remove any stubborn mineral deposits or debris.
4. Reassemble the aerator and screw it back onto the spout. Do not overtighten.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti prilikom korištenja vašeg basin mikser.

If the problem persists after attempting these solutions, please contact Ideal Standard customer support or a qualified plumber.

8. Specifikacije

9. Garancija i podrška

Ideal Standard products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Ideal Standard website.

For technical assistance, spare parts, or any other inquiries, please contact Ideal Standard customer support. Contact information can typically be found on the product packaging or the official Ideal Standard website.

Online resursi: You may find additional support, FAQs, and product information on the Službenik Ideal Standarda website.