1. Uvod
The SmallRig Mini V-Lock Assembly Kit MD2801B is a quick-release system designed for securely mounting V-mount accessories, such as V-mount batteries, onto camera cages, rigs, or other compatible equipment. This kit consists of a V-lock base station (female V-dock) and a V-lock wedge (male V-lock) that interlock to provide a stable and efficient attachment solution. Its compact and lightweight design makes it suitable for various professional video production setups.
2. Sigurnosne informacije
- Ensure all screws are tightened securely before use to prevent equipment damage.
- Do not exceed the maximum recommended weight capacity of 48 grams for the assembly kit.
- Avoid exposing the product to extreme temperatures or corrosive environments.
- Čuvati van domašaja djece.
3. Sadržaj paketa
Provjerite da li se sve stavke nalaze u vašem paketu:
- 1 x Female V-Dock
- 1 x Male V-Lock
- 1 x Spanner (Allen wrench)
- 2 x 1/4"-20 captive screws (pre-installed on Female V-Dock)
4. Proizvod je gotovview
The MD2801B kit is constructed from durable aluminum and features multiple mounting options. The female V-dock includes two 1/4"-20 threaded holes for attachment to various camera accessories. The male V-lock has three M3 holes, allowing it to serve as a replacement for the original V-lock on a V-mount battery.
5. Upute za postavljanje
5.1 Attaching the Female V-Dock to Your Rig
- Identify the desired mounting location on your camera cage, monitor frame, or shoulder pad mount.
- Align the two 1/4"-20 captive screws on the Female V-Dock with the corresponding threaded holes on your rig.
- Use the included spanner (Allen wrench) to tighten the screws until the Female V-Dock is securely fastened.
5.2 Attaching the Male V-Lock to Your Accessory
The Male V-Lock can be attached to your V-mount accessory or used to replace an existing V-lock on a V-mount battery using its three M3 holes. Ensure compatibility with your accessory's mounting pattern.
6. Uputstvo za upotrebu
6.1 Attaching a V-Mount Accessory
- Ensure the Female V-Dock is securely mounted to your rig.
- Align the Male V-Lock (attached to your V-mount accessory/battery) with the Female V-Dock.
- Slide the Male V-Lock into the Female V-Dock until it clicks into place. The integrated protruding portions ensure a secure, twist-free fit.
6.2 Detaching a V-Mount Accessory
- Locate the red quick-release lever on the side of the Female V-Dock.
- Press and hold the red quick-release lever.
- While holding the lever, slide the V-mount accessory upwards to detach it from the Female V-Dock.
7. Održavanje
- Clean the assembly kit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Periodically check all screws for tightness and re-tighten if necessary.
- Komplet čuvajte na suhom i mjestu bez prašine kada se ne koristi.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Accessory feels loose after attachment. | Screws on the Female V-Dock are not tight enough, or the accessory's Male V-Lock is not fully engaged. | Ensure the 1/4"-20 captive screws are fully tightened. Re-attach the accessory, ensuring it clicks securely into place. |
| Difficulty detaching accessory. | Quick-release lever not fully pressed, or mechanism is stiff. | Press the red quick-release lever firmly. If stiff, ensure no debris is obstructing the mechanism. |
9. Specifikacije
| Feature | Detalj |
|---|---|
| Model | MD2801B |
| Materijal | Aluminijumska legura |
| Dimenzije proizvoda | 52 mm (D) x 35.5 mm (Š) x 14 mm (V) |
| Težina artikla | 48 g (1.69 unci) |
| Mounting (Female V-Dock) | 2 x 1/4"-20 Threaded Holes |
| Mounting (Male V-Lock) | 3 x M3 Threaded Holes |
| Kompatibilnost | Standard V-Mount Batteries and accessories |
10. Garancija i podrška
Za informacije o garanciji i tehničkoj podršci, molimo pogledajte službene SmallRig stranice. webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte račun za kupovinu u slučaju reklamacije.
Službeno Webstranica: www.smallrig.com