Beckett BK171UL

Beckett BK171UL kondenzacijska pumpa sa sigurnosnim prekidačem - uputstvo za upotrebu

Model: BK171UL

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Beckett BK171UL Condensate Pump. This pump is designed for automatic removal of condensate from HVAC equipment, including air conditioners, furnaces, boilers, dehumidifiers, and high-efficiency oil or gas-fired furnaces. It is suitable for condensate water temperatures up to 150°F and acidic condensate.

Beckett BK171UL Condensate Pump

Image 1.1: Beckett BK171UL Condensate Pump, front view.

2. Sigurnosne informacije

WARNING: Risk of Electric Shock. Disconnect power before servicing.

  • Prije instalacije i rada pažljivo pročitajte sva uputstva.
  • Osigurajte da napajanje odgovara snazi ​​pumpe.tage (115 V).
  • Ne koristite pumpu s oštećenim kabelom ili utikačem.
  • Do not immerse the pump in water.
  • This pump is designed for indoor use only.
  • Držite ruke dalje od pokretnih dijelova tokom rada.
  • Osigurajte ispravno uzemljenje prema lokalnim električnim propisima.
  • The pump is equipped with a safety switch. Ensure it is correctly wired to prevent overflow.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

  • Beckett BK171UL Condensate Pump unit
  • 3/8" O.D. barbed check valve
  • Integrated 6-ft grounded power cord
  • Uputstvo za upotrebu (ovaj dokument)
Eksplodirao view of Beckett BK171UL Condensate Pump components

Slika 3.1: Rastavljeno view showing pump components including cover, check valve, motor, fan, automatic switches, lift-to-test tab, bullseye level, floats, impeller, multi-slot metal mount tabs, 6 ft. grounded power cord, and collection tank.

4. Instalacija i podešavanje

4.1 Montaža pumpe

The pump features stainless steel multi-slot mounting tabs for secure installation. Ensure the pump is placed on a level surface. Use the integrated bullseye level on the lid to confirm proper horizontal alignment.

Beckett BK171UL Condensate Pump installation features

Image 4.1: Close-up of pump showing bullseye level, twist lock check valve, and lift-to-test tab for easy installation and maintenance.

4.2 Condensate Inlet Connections

The pump is equipped with four 1-1/8-inch diameter inlet holes for connecting condensate drain lines from your HVAC equipment. Connect the drain line(s) to any available inlet(s).

4.3 Priključak ispusnog voda

Connect a 3/8" I.D. vinyl tubing (not included) to the 3/8" O.D. barbed check valve. The check valve twists to lock into place on the pump, preventing backflow of discharged water. Route the discharge line to an appropriate drain, ensuring it has a continuous downward slope and is free from kinks or obstructions. The pump can lift water up to 17 feet vertically.

4.4 Električni priključak

Plug the 6-ft grounded power cord into a standard 115V electrical outlet. Ensure the outlet is properly grounded and protected by a ground fault circuit interrupter (GFCI) if required by local codes.

4.5 Safety Switch Wiring

The integrated safety switch is designed to shut down the HVAC equipment or trigger an alarm in case of a pump malfunction or high water level, preventing overflow. Consult your HVAC equipment manual for proper wiring of the safety switch. Typically, the safety switch wires are connected in series with the low-voltage thermostat circuit of the HVAC unit.

5. Operacija

5.1 Automatic On/Off Operation

The Beckett BK171UL pump operates automatically. When condensate water in the collection tank reaches a predetermined level, the pump will activate, remove the water, and then shut off once the water level drops. This automatic cycle ensures efficient condensate removal without constant monitoring.

Beckett BK171UL Condensate Pump performance chart

Image 5.1: Diagram illustrating automatic ON/OFF operation and average performance at various lift heights (e.g., 95 GPH at 5 ft lift, 64 GPH at 10 ft lift, 17 ft shut-off).

5.2 Lift-to-Test Function

A "lift-to-test" tab is provided on the pump lid. Lifting this tab manually raises the float, simulating a high water level and activating the pump. This feature allows for quick testing of the pump's functionality and can also be used to drain the tank for servicing.

6. Održavanje

Regular maintenance ensures optimal performance and extends the life of your condensate pump.

  • Mjesečni pregled: Visually inspect the pump, inlet, and discharge lines for any blockages, leaks, or damage. Ensure the discharge line is free of kinks.
  • Tromjesečno čišćenje:
    1. Disconnect power to the pump and the HVAC unit.
    2. Use the lift-to-test tab to drain the tank, or manually remove any remaining water.
    3. Carefully remove the pump cover.
    4. Clean the collection tank, floats, and impeller area to remove any sludge, debris, or mineral deposits. A mild detergent and soft brush can be used.
    5. Sve komponente temeljito isperite čistom vodom.
    6. Reassemble the pump, ensuring the cover is securely in place.
    7. Reconnect power and test the pump using the lift-to-test tab.
  • Ispusna linija: Periodically check the discharge line for algae or mineral buildup, especially if the pump is handling acidic condensate. Clean or replace the tubing as necessary.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Pumpa ne radiNema struje za pumpuCheck power cord connection, circuit breaker, and GFCI.
Float switch stuck or obstructedDisconnect power, remove cover, clean floats and tank.
Pump runs but does not discharge waterDischarge line clogged or kinkedInspect and clear the discharge line. Ensure no kinks.
Check valve obstructedDisconnect power, remove and clean the check valve.
Radno kolo je začepljenoDisconnect power, remove cover, clean impeller area.
Pumpa radi neprekidnoFloat switch stuck in "on" positionDisconnect power, remove cover, clean floats and tank.
Leak in discharge line or check valveInspect all connections and the discharge line for leaks. Tighten or replace as needed.
Pumpa je bučnaDebris in impeller or motorDisconnect power, remove cover, clean impeller area.
Pump not levelAdjust pump placement using the bullseye level.

8. Specifikacije

  • Model: BK171UL
  • Voltage: 115V
  • Maksimalno podizanje: 17 ft
  • Brzina protoka: 112 GPH @ 1 ft lift
  • Amperage: 1.1 Amps
  • Wattage: 60 Watts
  • Učestalost: 60 HZ
  • Kapacitet sabirnog rezervoara: 2.5 Quarts
  • Priključak za pražnjenje: 3/8" O.D. barbed check valve
  • Ulazni priključci: Four 1-1/8" diameter holes
  • Kabl za napajanje: 6 ft grounded with plug
  • Maximum Condensate Water Temperature: 150°F
  • Materijal: Akrilonitril Butadien Stiren (ABS), Plastika
  • Dimenzije (D x Š x V): 11.2" x 5.2" x 6.6"
  • Težina artikla: 3.7 funti
  • Sigurnosne karakteristike: Integrated safety switch, Thermally protected motor
  • Certifikati: UL/cUL listed in U.S./Canada
Beckett BK171UL Condensate Pump dimensions

Image 8.1: Dimensions of the Beckett BK171UL Condensate Pump.

9. Garancija i podrška

The Beckett BK171UL Condensate Pump comes with a 3-godišnja garancija proizvođača. For warranty claims, technical assistance, or replacement parts, please contact Beckett Corporation customer support. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the official Beckett Corporation webstranice ili kontaktirajte njihov odjel za korisničku podršku.

© 2023 Beckett Corporation. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.