MIYAKO LCD-4255 TV Wall Mount Instruction Manual

1. Uvod

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your MIYAKO LCD-4255 TV Wall Mount. The LCD-4255 is a heavy-duty tilting wall mount designed for LCD, LED, and Plasma televisions ranging from 32 to 65 inches. It supports VESA patterns up to 700mm x 450mm and has a maximum load capacity of 88 lbs (39.9 kg). Constructed from 2mm thick cold-rolled steel, this mount ensures secure and reliable support for your television. Please read all instructions carefully before beginning installation.

This image displays the main components of the MIYAKO LCD-4255 TV wall mount, including the horizontal wall plate with a built-in level and the two vertical brackets that attach to the television.

2. Sigurnosne informacije

UPOZORENJE: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Osigurajte da zidna konstrukcija može sigurno podnijeti ukupnu težinu nosača i televizora.
• Ne prekoračujte maksimalnu nosivost od 88 kg (39.9 lbs).
• Use only the provided mounting hardware. If your installation requires different hardware, consult your local hardware store.
• Uvijek neka instalaciju obavljaju najmanje dvije osobe kako bi se spriječile povrede ili oštećenja.
• Držite djecu i kućne ljubimce podalje tokom instalacije.
• Check for hidden electrical wires, plumbing, or gas lines in the wall before drilling.

3. Sadržaj paketa

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact MIYAKO customer support.

• Zidna ploča (1)
• TV nosači (2)
• Built-in Bubble Level (integrated into wall plate)
• Mounting Hardware Kit (screws, anchors, washers for various wall types and TV models)

4. Postavljanje i instalacija

Follow these steps carefully to install your MIYAKO LCD-4255 TV Wall Mount.

4.1 Provjere prije instalacije

• Provjerite kompatibilnost TV-a: Ensure your TV's screen size is between 32 and 65 inches and its weight does not exceed 88 lbs (39.9 kg).
• Provjerite VESA uzorak: Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This mount supports VESA patterns up to 700mm (horizontal) x 450mm (vertical).
• Vrsta zida: Determine your wall type (wood stud, concrete, brick, drywall with anchors). Use appropriate hardware for your wall type.

This image demonstrates the VESA compliant arm brackets, showing how they can be adjusted horizontally to fit various VESA patterns up to 700mm x 450mm, accommodating different television sizes.

An illustration showing the wall mount behind a television, indicating its compatibility with most flat panel monitors ranging from 32 to 65 inches diagonally.

4.2 Montiranje zidne ploče

1. Determine the desired height for your TV. Mark the center of the desired location on the wall.
2. Hold the wall plate against the wall at the marked location. Use the integrated bubble level to ensure it is perfectly horizontal.
3. Označite tačke bušenja kroz rupe na zidnoj ploči.
4. Izbušite pilot rupe prema preporučenoj veličini svrdla za vaš tip zida i odabrani hardver.
5. Pričvrstite zidnu ploču na zid pomoću odgovarajućih vijaka i tiplova. Provjerite da je čvrsto pričvršćena.

4.3 Pričvršćivanje nosača na TV

1. Pažljivo postavite televizor ekranom prema dolje na meku, čistu površinu kako biste spriječili oštećenje ekrana.
2. Align the two vertical TV brackets with the mounting holes on the back of your TV. Ensure the hooks on the brackets face downwards.
3. Select the correct screws and washers from the hardware kit that fit your TV's mounting holes.
4. Attach the brackets securely to the TV. Do not overtighten.

4.4 Montiranje TV-a na zidnu ploču

1. Uz pomoć, pažljivo podignite TV pomoću priloženih nosača.
2. Zakačite nosače TV-a na gornju ivicu zidne ploče.
3. Pažljivo spuštajte TV dok nosači potpuno ne sjednu na zidnu ploču.
4. Locate the safety screws on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental removal.

Krupni plan view of the safety latch mechanism, which secures the television brackets to the wall plate, preventing accidental dislodgement.

A detailed diagram illustrating key features of the wall mount: 2mm thick cold-rolled steel construction, monitor brackets with +/- 10-degree tilt capability, a built-in bubble level for easy mounting, a bracket tilt locking knob, and three wide holes for efficient wire and cable management.

5. Uputstvo za upotrebu

The MIYAKO LCD-4255 features an adjustable tilt function to optimize your viewing iskustvo.

5.1 Podešavanje ugla nagiba

1. Locate the tilt adjustment knobs on the side of each TV bracket.
2. Loosen the knobs to allow the TV to tilt freely.
3. Adjust the TV to your desired upward or downward angle (up to 10 degrees).
4. Once the desired angle is achieved, firmly tighten the tilt adjustment knobs to secure the TV in position.

This image visually represents the adjustable tilt function of the wall mount, allowing for a 10-degree upward or downward tilt to achieve optimal viewing angles.

5.2 Upravljanje kablovima

The wall plate includes large cutouts to facilitate cable routing and management, allowing you to organize your TV cables neatly behind the screen.

6. Održavanje

Redovno održavanje pomaže u osiguravanju dugotrajnosti i sigurnog rada vašeg zidnog nosača za TV.

• čišćenje: Obrišite nosač mekom, suhom krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
• Periodične kontrole: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• Pregled oštećenja: Inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

7. Otkrivanje problema

If you encounter any issues during or after installation, refer to the following common problems and solutions.

• problem: TV nije ravan nakon instalacije.
  Rješenje: Loosen the wall plate mounting screws slightly, adjust the wall plate using the built-in level, and then retighten the screws. Alternatively, some TVs allow for minor leveling adjustments on the brackets themselves.
• problem: TV feels unstable or loose on the mount.
  Rješenje: Ensure all wall plate screws are securely tightened. Verify that the TV brackets are fully seated on the wall plate. Confirm the safety screws at the bottom of the TV brackets are tightened.
• problem: Poteškoće s naginjanjem televizora.
  Rješenje: Ensure the tilt adjustment knobs on the TV brackets are sufficiently loosened before attempting to adjust the angle. If the TV is too heavy, ensure it is within the specified weight limit.

8. Specifikacije

9. Garancija i podrška

For warranty information or technical support, please contact MIYAKO customer service directly. Keep your purchase receipt as proof of purchase.