Uvod
This user manual provides comprehensive instructions for the Kingston DataTraveler 2000 (DT2000) encrypted USB flash drive. The DT2000 is designed to protect your sensitive data with its onboard alphanumeric keypad and hardware-based AES 256-bit encryption. This guide will walk you through the setup, operation, maintenance, and troubleshooting of your device.
Ključne karakteristike uključuju:
- FIPS 197 certified 256-bit AES-XTS hardware encryption.
- Onboard alphanumeric keypad for PIN entry.
- USB 3.1 Gen 1 (USB 3.0) interface for fast data transfer.
- Waterproof and dustproof design for enhanced durability.
Product Overview
Familiarize yourself with the components of your Kingston DataTraveler 2000.
Slika 1: Vrh view of the Kingston DataTraveler 2000, highlighting the product name and capacity.
Figure 2: The DataTraveler 2000 with its protective cap removed, exposing the USB connector and the integrated alphanumeric keypad for PIN entry.
Slika 3: Detaljno view of the DataTraveler 2000's alphanumeric keypad, featuring numerical keys, alphabetical labels, and dedicated lock/unlock buttons.
Podešavanje i početna konfiguracija
Before using your DataTraveler 2000, you must set up a Personal Identification Number (PIN).
1. Početno punjenje
The DataTraveler 2000 contains a small internal battery to power the keypad. It charges automatically when connected to a USB port. Ensure the drive is fully charged before initial use, indicated by the LED status.
2. Setting Your Administrator PIN
- Connect the DataTraveler 2000 to a USB port on your computer. The drive's LED will illuminate.
- Pritisnite KLJUČ button (key symbol) on the keypad.
- Enter your desired Administrator PIN. The PIN must be between 7 and 15 digits long and cannot contain all consecutive or repeating numbers (e.g., 1234567 or 1111111).
- Pritisnite KLJUČ button again to confirm your PIN.
- Re-enter your PIN to verify.
- Pritisnite KLJUČ button one last time. The LED will change color, indicating the PIN has been successfully set and the drive is unlocked.
Important: Remember your Administrator PIN. If you forget it, there is no recovery method, and your data will be inaccessible.
Uputstvo za upotrebu
Otključavanje pogona
- Connect the DataTraveler 2000 to a USB port.
- Enter your Administrator PIN using the keypad.
- Pritisnite KLJUČ button. The drive will unlock, and the LED will indicate its unlocked status. The drive will now appear as a removable storage device on your computer.
Zaključavanje pogona
To secure your data, always lock the drive when not in use.
- Method 1: Safely Remove Hardware
Safely eject the drive from your operating system. The drive will automatically lock upon disconnection. - Method 2: Manual Lock
While connected and unlocked, press the LOCK button (padlock symbol) on the keypad. The drive will lock immediately. - Method 3: Auto-Lock
The drive will automatically lock after a period of inactivity (default setting).
Prijenos podataka
Once unlocked, the DataTraveler 2000 functions like any standard USB flash drive. You can drag and drop files, copy, paste, and delete data as needed.
For optimal performance, ensure you are connected to a USB 3.0 (or higher) port. The drive is backward compatible with USB 2.0 ports, but data transfer speeds will be reduced.
Održavanje i njega
- čišćenje: Use a soft, dry cloth to clean the exterior of the drive. Avoid using liquid cleaners or solvents.
- Skladištenje: Store the drive in a cool, dry place. Always keep the protective cap on the USB connector when not in use to prevent dust and moisture ingress.
- baterija: The internal battery charges when the drive is connected to a USB port. No specific charging routine is required.
- Vodootporan/otporan na prašinu: While designed to be waterproof and dustproof, avoid prolonged submersion or exposure to extreme conditions. Ensure the cap is securely in place for maximum protection.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Računar ne prepoznaje disk. | Drive is locked or not properly connected. | Ensure the drive is unlocked by entering the correct PIN. Try connecting to a different USB port. Restart your computer. |
| Tastatura ne reagira. | Low internal battery or temporary glitch. | Connect the drive to a powered USB port for a few minutes to charge the internal battery. Disconnect and reconnect the drive. |
| Incorrect PIN error. | Unesen je pogrešan PIN. | Carefully re-enter your Administrator PIN. Ensure you are pressing the correct keys. |
| Male brzine prijenosa podataka. | Connected to a USB 2.0 port or system performance issues. | Connect the drive to a USB 3.0 or USB 3.1 Gen 1 port for optimal speeds. Close other demanding applications on your computer. |
Specifikacije
| Feature | Detalj |
|---|---|
| Vrsta proizvoda | USB fleš disk |
| Broj modela | DT2000/4GB |
| Kapacitet pohrane | 4 GB |
| Hardversko šifrovanje | Yes, FIPS 197 certified 256-bit AES-XTS |
| Interface Type | USB 3.1 Gen 1 (backward compatible with USB 3.0 and USB 2.0) |
| Brzina čitanja | Do 80 MB/s |
| Brzina pisanja | Do 12 MB/s |
| Tastatura | Onboard Alphanumeric 10-key PIN pad |
| Posebne karakteristike | Vodootporno, Otporno na prašinu |
| Dimenzije (DxŠxV) | 3.15 x 0.41 x 0.79 inča (80 x 10.4 x 20 mm) |
| Težina | 1.76 unce (50 grama) |
| Interna baterija | 1 Lithium Polymer battery (3.7 Volts) |
| UPC | 740617271966 |
Garancija i podrška
Kingston Technology provides a warranty for the DataTraveler 2000. For detailed warranty information and support resources, please visit the official Kingston website.
- Zvanična stranica za podršku: For the most up-to-date user guide, getting started information, and details on changing your PIN, please visit Kingston.com/DT2000.
- Opća podrška: For other inquiries or technical assistance, refer to the main Kingston support portal: Kingston.com/support.
Figure 4: Genuine Kingston Product Seal, ensuring authenticity.