BROWAN Pico Next Indoor Gateway
Minimum Requirements
- A computer running higher than Windows 7 or OS / Linux equivalent
- Broadband Internet Service / Router with DHCP server
- Internet Browser (Chrome)
- At least 12V / 1.5A DC power supply
- LTE carrier standard-sized SIM card (optional)
Package Contents
- Pico Next Indoor Gateway
- DC 12V/1.5A Power Adapter
- 1 LoRa Antenna
- 1 LTE Antenna (optional)
- 1 Wireless Antenna (optional)
- 1 GPS Antenna (optional)
- Provided accessories depend on purchased SKU
Features
Front Panel
Back Panel
Power up Gateway
Power up Pico Next via connecting the power adapter provided to the DC jack In. Pico Next will automatically turn on after powering up.
| LED Functions | Solid | Blinking | Off |
| Power | Power On | Booting /OTA | OFF |
| Internet | Internet available | Check internet | RFU |
| Wireless | Wireless enabled | RFU | Wireless disabled |
| LoRa | LoRa Working | Initializing | LoRa not working |
Obtaining IP Address
Default Pico Next is in DHCP mode.
- turn on Pico Next and it will automatically connect an available DHCP server
- Obtain DHCP IP address from server
Gateway Setup
Open a web browser in on the computer, type in the address bar Pico Next’s DHCP IP address and press enter.
A login screen will appear. Username is “admin” while GUI password can be found on the back label. 
Pico Next User Interface will appear, and users may adjust account information accordingly.
Documents / Resources
 | BROWAN Pico Next Indoor Gateway [pdf] Installation Guide Pico Next Indoor Gateway, Pico Next, Indoor Gateway, Pico Gateway, Gateway |
 | BROWAN Pico Next Indoor Gateway [pdf] User Guide L0007, 2AAS9-L0007, 2AAS9L0007, Pico Next Indoor Gateway, Next Indoor Gateway, Indoor Gateway, Gateway |
