This Owner’s Manual is provided and hosted by Appliance Factory Parts.

Appliance Factory Parts

BROAN HD50R DB
Owner’s Manual

Shop genuine replacement parts for BROAN HD50R DB

BROAN HD50R DB Ventilating Fans with Radiation Dampers 0

Find Your BROAN HVAC Parts – Select From 1309 Models

——– Manual continues below ——–

BROAN logo SPECIFICATION SHEET

VENTILATING FANS RDH WITH RADIATION DAMPERS

MODEL RDHBROAN HD50R DB Ventilating Fans with Radiation Dampers 1 BROAN HD50R DB Ventilating Fans with Radiation Dampers 2 RDF MODELS

Dependable, high performance ventilation fans with attached radiation dampers and attractive metal grilles.

FEATURES

HOUSING:

  • Rugged, 26-gage galvanized steel construction
  • Key-holed mounting brackets span up to 24″ and are adjustable horizontally and vertically
  • Reversible knockout bracket allows wiring from top or side
  • 4″ round duct fitting with built-in backdraft damper for easy duct connection

BLOWER:

  • Plug-in, permanently lubricated motor
  • Totally enclosed motor with long life bearings designed for continuous operation (HD80RDF, HD50RDF only)
  • Centrifugal blower wheel

RADIATION DAMPER:

  • For use in 1, 2 and 3 hour rated floor-ceiling and roof-ceiling constructions
  • Galvanized steel frame
  • High temperature, non-asbestos, reinforced fiber thermal fabric
  • Stainless steel closure spring
  • 165°F fusible link

GRILLE:

  • Attractive steel grille painted white
  • Low profile blends well with any decor

(1) ROUGH-IN KIT & (1) FINISH KIT MAKE A COMPLETE UNIT. PURCHASE EACH SEPARATELY.

Rough-In Kit
Model RDH • Contains housing and radiation damper (packed 4 per carton).

Finish Kits
Models 110RDF, 80RDF, HD80RDF and HD50RDF •
Contain blower and grille (packed 4 per carton).

SPECIFICATIONS

RDH with

VOLTSAMPSCFMSONES

DUCT

110RDF

1201.31104.04” ROUND
80RDF1200.5802.5

4” ROUND

HD80RDF

1200.5802.54” ROUND
HD50RDF1200.4501.5

4” ROUND

TYPICAL SPECIFICATION

Ventilation Fan with Radiation Damper shall be Broan Model RDH with 110RDF (RDH with 80RDF) (RDH with HD80RDF) (RDH with HD50RDF).

Housing shall be made of galvanized steel and have adjustable mounting brackets. It shall have a built-in backdraft damper and be ducted to a roof or wall cap.

Blower shall be removable and have a centrifugal blower wheel. Motor shall be permanently lubricated.

Air delivery shall be no less than and sound level shall be no greater than values listed in the chart above. Air and sound ratings shall be certified by HVI.

Radiation damper shall be rated for use in up to three hour ceiling constructions. It shall be UL Classified and Warnock Hersey Listed (see other side for installation details).

Ventilating Fan with Radiation Damper shall be Energy Star® qualified. (Model HD50RDF only).

HVI certified C_UL_US
Energy Star
Model HD50RDF only

Broan-NuTone LLC   Hartford, Wisconsin    www.broan.com    800-558-1711

REFERENCEQTY.REMARKSProject
BlankLocation
Architect
Engineer
Contractor
Submitted byBlankDateBlank

80B                99043061D

  BROAN HD50R DB Ventilating Fans with Radiation Dampers 3

CLASSIFIED
C_UL_US
SEE DETAILS ON ULCLASSIFICATION MARKING ON PRODUCT

BROAN HD50R DB Ventilating Fans with Radiation Dampers 4

  1. WIRE
  2. FAN
  3. DAMPER
  4. MOUNTING BRACKET
  5. GRILLE
  6. GRILLE SCREW
  7. CEILING

  Intertek US
WARNOCK HERSEY LISTING INCLUDES DAMPER ONLY. IT DOES NOT INCLUDE EXHAUST FAN. DAMPERS MAY BE USED WITH UL LISTED FAN MODELS NOTED.

BROAN HD50R DB Ventilating Fans with Radiation Dampers 5a

  1. 16″ OR 24″ ON CENTER
  2. MOUNTING BRACKET
  3. FASTENER
  4. FAN
  5. DAMPER
  6. WOOD FRAMING MEMBER OR JOIST
  7. GRILLE
  8. GRILLE SCREW
  9. CEILING

Documents / Resources

BROAN HD50R DB Ventilating Fans with Radiation Dampers [pdf] Instructions
HD50RDF, 110RDF, 80RDF, HD80RDF, HD50RDF, HD50R DB Ventilating Fans with Radiation Dampers, HD50R DB, Ventilating Fans with Radiation Dampers, Fans with Radiation Dampers, with Radiation Dampers, Radiation Dampers, Dampers

References

Leave a comment

Your email address will not be published. Required fields are marked *