BL-2120C AHD Front Camera Monitor System
User Manual
Adjusting the Angle of view
BL-2120C AHD Front Camera Monitor System
Please refer to https://brigade-electronics.com/product-support-area/ for more information and technical documents
Step 1
Remove the back case from the camera with a Philips head screwdriver to reveal the sliding arm.
Step 2
Loosen the sliding mechanism using the Philips head screwdriver.
Step 3
This will now allow the lens to slide up and down to find the desired viewing angle. Once the camera has been adjusted to the desired angle, tighten the screw on the sliding mechanism, then replace cover and fixing screw.
technical@brigade-electronics.com
www.brigade-electronics.com
Documents / Resources
 | BRIGADE BL-2120C AHD Front Camera Monitor System [pdf] User Manual BL-2120C AHD Front Camera Monitor System, BL-2120C, AHD Front Camera Monitor System, Front Camera Monitor System, Camera Monitor System, Monitor System |