BRAUN BC22B Alarm Clock User Guide
PRODUCT OWERVEV
Battery installation
- Remove the battery cover.
- Insert 3xAA (1.5V) battery observing the correct polarity, as shown on the diagram.
- Replace battery cover.
Only use new alkaline batteries from a reputable brand.
Time setting
Turn the time set knob (
)on the back of the clock in the direction of the arrow until the correct time is shown.
Alarm setting
Turn the alarm set knob (
)on the back of the clock in the direction of the arrow until the desired alarm time is shown.
Alarm function
To set the alarm, move the slider on the right side of the clock upwards. The alarm is set when the green color indicator is visible. To unset the alarm, move the slider on the right side of the clock downwards.
Snooze function
When the alarm is sounding, push the button at the top of the clock and the SNOOZE/LIGHT function will be activated. The alarm will be stopped and will sound again after ~5 minutes.
Backlight function
Anytime, push the button at the top of the clock and the backlight function will be activated. The dial will be illuminated for ~5 seconds.
For detailed information refer to the full user manual available at www.braun-clocks.com/pages/warranty or scan this code:
Braun helpline
Should you have a problem with your product, please check your local service center at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the Procter & Gamble Company or its affiliates.
Documents / Resources
 | BRAUN BC22B Alarm Clock [pdf] User Guide BC22B, BC22B Alarm Clock, Alarm Clock, Clock |
