Boytone BT-225FB Wireless Bluetooth Stereo Audio Speaker Bookshelf System

Specifications

• Package Dimensions 
  15.83 x 14.17 x 11.81 inches
• Item Weight 
  13.55 pounds
• Connectivity Technology 
  Bluetooth, Auxiliary, USB
• Speaker Type 
  Bookshelf, Subwoofer
• Power Source 
  AC
• Output Power
  35W+15Wx2(RMS)
• Drive Units
  3″ x2 full range magnetically shielded +6.5″ subwoofer
• Frequency Response:
  Satellites: 120Hz-20KHz
  Subwoofer:20Hz-17OHz
• Separation
  240 dB
• S/N
  70dB
• Distortion
  0.5%(1K, 1W)
• Power Supply
  120V 60Hz
• Brand
  Boytune

Introduction

Boytone’s system fits anyplace in your house or business, so you can enjoy high-quality sound from your music. Bluetooth wireless connectivity is included, allowing you to stream music from your tablet or smartphone, listen to FM radio, and play MP3s by connecting a USB or SD card.Black Multimedia Speaker System with BT Wireless Connection. 2.1 Multimedia HiFi Speaker System for Music, Movies, and Games with Boytone Wireless Connection Enabled Sound for Wireless Listening with SD, AUX, and USB Connectivity for Serious Sounds.

Features

• Quality 2.1 speaker system with built-in amplifier
• Full audio spectrum performances, ideal for your favourite entertainment from Mp3, Mp4, CD/DVD movies and digital playbacks
• Specially designed woofer cabinet for bass and resolution
• Comes with wired remote control and RCA stereo connection

Package contents

• Subwoofer cabinet  1 pc
• satellite speakers     2 pcs
• Remote control      1 pc
• User Manual          1 pc
• FM ANT               1 pc

Front panel

1. VOL-
2. ST-BY/INI
3. SOURCE
4. VOL+
5. TONE
6. TUNING+/
7. TUNING-/

1. ST-BY/PLAY/PAUSE Press to turn on speaker,long press into stand-by. PLAY/PAUSE on the USB/SD/BL mode.
2. SOURCE- Change the input mode.
3. VOLUME-/+- Volume down/up.
4. TONE– Press TONE key to select the TREBLE and BASS. And use the volume knob to adjust the TREBLE-6-+6, BASs 00-30.
5. TUNING+/NEXT- Press once to increase the FM frequency 0.1M, long press to the semi-automatic search for radio.In USB/SD/BL mode, press “NEXT play next song.
6. TUNING-/PREVIOUSPress once to reduce the FM frequency 0.1M, long press to the semi-automatic search for radio.ln USB/SD/BL mode, press “PREVIOUS” play previous song

How to use the remote control

1. ST-BY
2. 0-9
3. SOURCE
4. TONE
5. VOL+
6. PREVIOUS
7. TUNING-
8. MUTE
9. PRESET
10. MEMORY
11. PLAY/PAUSE
12. NEXT
13. VOL-
14. TUNING+

1. Press “ST-BY” LED showing “AU18”,it is AUX mode playing state.
2. “MUTE” means to activate or deactivate mute.
3. “SOURCE’means you can choose AUX, DVD ,USB/SD,FM,BL input mode, at the same time ,the LED will shoOw “Au18’means AUX mode, “Du18′ means DVD mode. “87.5”means FM mode, “BI18’means BL mode.
4. “TONE’means you can choose “TREBLE and “BASS” “VOL+/-“means you can increase or decrease volume of TREBLE ” or “BASS”.
5. When enter into FM mode,press”MEMORY”the number on the LED will Blink.this means the machine is under save channel state. You can change the blinking number by pressing”NEXT”or “PREV”.press PLAY/PAUSE’you can save the channel into same number.it will enter into automatic search channel and automatic save channel when pressing “MEMORY”for 3-5 seconds (noted:the channel which you saved before will be deleted when you press “MEMORY”for 3-5 seconds.
6. When entering into USB/SD mode. “NEXT” means next song; “PREVmeans previous song: “PLAY/PAUSE”means play/pause; press ing the number “0-9’on the remote control.you can choose the corresponding song.
7. VOL+/- means you can increase or decrease volume.
8. “TUNING “means decrease the frequency of channel selection. Press TUNING-” for a long time means decrease the frequency of channel selection Ncontinuously
9. “TUNING+”means increase the frequency of channel selection. Press “TUNING+”for a long time means increase the frequency of channel selection continuously.
10. “PLAYIPAUSE”means play/pause for USB/SD.
11. “PREV” means previous song for USB/SD.
12. “NEXT” means next song for USB/SD.
13. Press “SOURCE” buttons on the remote to convert to Bluetooth input mode, LED display right bottom start to flashing (2 seconds) to search the Bluetooth device. Turn on your mobile Bluetooth device and search the device name “BT SPEAKER “. paired them well.When you have successfully paired your mobile to the speaker system, the LED right bottom stop flashing. When start to play your mobile music, the LED flashed every one second. The functions as “PREVIOUS/NEXT”, “PLAYIPAUSE”, can operate via the front panel. On BL mode, when connecting with mobile, press ” for 3 seconds, bluetooth function can be force-disconnected.

Rear panel

System connection diagram

1. Connect the audio sources
   Connect the RCA cable to the input of the subwoofer, make sure the red and white color jack to the correspond input of the woofer. Connect the 3.5″ stereo input jack into the output of the audio sources, such as MP3, MP4, walkman, computer etc.
2. Power on the system, adjust the master volume to the suitable level. Adjust “VOL” to the suitable to meet your different requirement.

SPEAKER TERMINALS
Connect the left & right channel satellite to 2.1 speaker output terminals.

NOTE
Do not leave objects generating magnetism near the speakers.

In use please pay attention to the following items: 

Frequently Asked Questions

• What CD player can be used with thus?
  You are able to connect any type of CD player to this system through a the auxiliary.
• Will this play multiple discs? 
  No. The system is not a CD player.
• Have had this for 3 days and lost the remote !!! Looked on the website and not sure which one to buy?
  Call to see if you can get replacement.
• What is a good antenna to use with this system?
  It comes with an antenna that you are able to plug-in to get better reception if needed.
• Can I order new antenna?
  Yes. You are able to email Boytone’s customer service and they will process this for you.
• How do you set the presets?
  You should be able to with the remote. You would need to press either the preset or memory button and press for example 1, then press the preset and memory button again. Then when wanting to go directly to that change you would press the 1 to go directly to that channel that was preset.
• Will an amazon echo dot work with the aux. plug? 
  Yes it should. Anything connected through the AUX should play. Just make sure the system is under the AUX setting.
• Can the bass and treble be adjusted from the remote?
  Yes you should be able to with the TONE button on the remote.
• What brand of remote control codes can we use to operate this with our tv remote? 
  The remote control comes with the system. If you are looking for the controllers codes, you are able to get that if you email Boytone’s customer service.
• Can i hook up my turntable to stero?
  Yes. Depending on which turntable you have you are able to connect through an amplifier or through Bluetooth.
• This unit has a usb port will it play via usb with iPhone? 
  No. The USB port is meant to play a USB flash stick.

References

• User Manual