PRO BASS GEAR PODS
For a better sound quality experience, suggest using IOS 8.0/ Android 4.3 or above operating system.
|Silicone Eartips||Pods Charging Pin|
|Earbuds Indicator||Touch Control Area|
|Case Charging Pods for Pods||Charging Pods Indicator|
|Type- C Charging Connector|
Connecting to Earbuds
Take the earbuds out from the case, the earbuds will automatically turn on.
Turn your device’s Bluetooth on. Search for “Boult Audio Gearpods” and select to connect. Regular use :
Once next used, the earbuds will automatically connect with a preconnected device.
Place the earbuds into your ear and twist slightly for a comfortable and snug
Note: Regularly clean the dust mesh after use to avoid the sound being blocked by dirt and debris.
Power On & Oﬀ
- Remove the earbuds from the case, they will automatically turn on and pair with each other.
- Long press the touch control area on both earbuds at the same time for 2 seconds, then the earbuds will turn on and pair with each other.
Light status: One side red and blue LED light alternatively another side LED light quickly.
- Earbuds will automatically turn oﬀ and enter charging mode when they are placed in the case.
- Disconnecting the Bluetooth from the device and laying the earbuds down for 3 mins will turn them oﬀ.
- Disconnecting the Bluetooth from the device, long press the touch control area for 5s and the earbuds will turn oﬀ.
Charging the Earbuds
Place the earbuds into the case, once the charging pin connects, the light on the charging case will turn on to display the case the battery remains, then the fourth light keep white on indicate the earbuds charging, light oﬀ means the battery is full.
Charging the Case
Plug the charging case into a 5V/1A adapter with a Type-C cable (include in the package). The charging light will ging. When full the white light will stay on and the case should be disconnected from the power source.
Bluetooth Standard: Version 5.1
Output Voltage of Base: 3.7V
Charging time Earbuds- 1.5H, Charging case- 1H
Working distance: 10M
Compatible System: Android/IOS/Windows
|Music Play/Pause||Single Click on L or R earbud|
|Next Song||Double click the R earbud|
|Previous Song||Double click the L earbud|
|Pick up call||Single Click on L or R earbud|
|End call/Reject call||Double-click on L or R earbud|
|Voice Assistant||Long press 3 Seconds L or R earbud|
Clear to pairing
Clear the pairing record of earbuds and mobile phones:
Take out the earbuds from the charging case, and touch the left and right earbuds 5 times, it will clear the record of the Bluetooth device. Then search for the Bluetooth name “ Boult Audio Gearpods” to pair.
Resume pairing of left and right earbuds:
Put earbuds in the charging case and charge, then take earbuds out of the charging case when they charge for a few minutes. they will enter into pairing mode automatically.
P: The earbuds don’t pair with each other?
A: Place the earbuds into the case for charging for a few seconds. take them out of the case and try to connect again.
P: The earbuds don’t charge when placed into the case.
A: Check to see if the charging case light will turn on when earbuds are placed inside. If it doesn’t light up charge the case
P: The sound is imbalanced between the left and right sides.
A: Please clean the earbuds mesh after use.
Documents / Resources
|BOULT AUDIO AirBass GearPods True Wireless Earbuds [pdf] User Manual|
AirBass GearPods, True Wireless Earbuds, Wireless Earbuds, AirBass GearPods, Earbuds