BOSS BE62CP-C Digital Multimedia Receiver
Specifications
- Model: [Insert Model Name]
- Serial Number: [Insert Serial Number]
- Date of Purchase: [Insert Date]
Basic Product Operation
Make sure to familiarize yourself with the basic operations of the product. Refer to the manual for detailed instructions.
Product Setup
- Locate the serial number on the top part of the chassis.
- Check the contents of the box to ensure all components are present.
- Follow the step-by-step guide provided in the manual for setting up the product.
Using/Caring for the Touchscreen
- Handle the touchscreen with care to avoid scratches or damage.
- Use a soft, lint-free cloth to clean the touchscreen surface gently.
- Avoid using harsh chemicals or abrasive materials when cleaning the touchscreen.
Apple CarPlay
Explore the features and capabilities of Apple CarPlay by following the instructions in the manual.
Media Player Source Switching
Learn how to switch between different media player sources for an enhanced audiovisual experience.
FAQs
Q: Where can I find the serial number of the product?
A: The serial number is located on the top part of the chassis.
Q: How do I clean the touchscreen?
A: Use a soft, lint-free cloth to gently clean the touchscreen surface. Avoid harsh chemicals.
Q: How can I set up Apple CarPlay?
A: Follow the instructions provided in the manual to set up and use Apple CarPlay with your product.
This symbol with “WARNING” is intended to injury, death, damage to the product and/or property.
This symbol with “CAUTION” is intended to alert the user to the presence of important
injury or damage to the product and/or property.
Use of the Apple CarPlay logo means that a vehicle user interface meets Apple performance standards.
this vehicle or its compliance with safety and regulatory standards. Please note that the use of this product with iPhone or iPod may a ect wireless performance. ipone is trademark of Apple Inc.,registered in the U.S.and other countries. Apple CarPlay is a trademark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BOSS AUDIO Systems is under license. Other trademarks and trade names are those
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: Do not turn up the volume so high that you can’t hear what’s around you.
Do not operate mobile video equipment while driving a motorized vehicle priority.
dealer or the nearest authorized BOSS AUDIO SYSTEMS Service Center.
always be your highest
, or ear discomfort. o the power and consult your
Boss Audio Systems does not recommend to install the product yourself.
Always consult with a professional installer .
experience in electronic equipment and motorized vehicle accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards Refer any repairs to a quali ed BOSS AUDIO SYSTEMS Service Center
5
Before Installing
Images and Video
Watching video while driving is against Federal, State, and Local laws.
Check surroundings for safety while camera images are displayed.
About this manual
reference. -Keep the manual -Clean with a dry cloth only -Do not use or operate near water -Do not defeat any safety features
7
ident. n of smartphone Apps accessible
d c keep it in a safe place for future
.
What comes in the box
Hardware Qty 1 BE62CP Qty 1 Trim Ring Qty 1
-M5 x 6mm Bolts (8) -Brackets (2)
Qty 1 Qty 1
Power/Harness Hands-free Microphone
8
Front Detail
1 2 3 4
5
6
1 4 Power/Volume Control Knob
2
3
5 Voice Assistant
9
6 AUX IN/USB/SD/Reset Cover
Rear Detail
Main Harness
Pre-Amp Output A/V Input AM/FM Antenna
USB
10
Product Basics
BAND
For radio band conversion between FM/AM
MODE
Press to select system mode.
MENU
Press to return to the home menu,or previous source.
Voice Assistant
press to command
Power/Volume Control
1.Long press to turn the unit ON or OFF. 2.Short press to mute or restore volume. 3.Rotate to increase or decrease volume.
Display Display On -Touch
Standby/ Power On
1.long press to Standby 2.Short press to Power ON
11
Using and Caring for the Touchscreen
Use:
-end mobile devices. It should be used for and cared for like that type of
Do not allow any sharp objects to come in contact with the screen glass.
Care and Cleaning:
To clean the screen, use a dry micro ber type cloth to clean. Do not use ammonia, window cleaner, or any other type of household chemicals to clean the screen. Abrasives should not be used at all.
12
Product Setup (Date & Time)
Connect your Apple ® device using a Lightning® cable*. The CarPlay USB port must be used.
date. User must set Time Zone manually. Default is Paci c Time Zone
General > Language
Time Zone 13
Media CarPlay Tuner
AV IN Home
Camera EQ
AUX IN
Handsfree
Hands-free
14
Apple CarPlay
Using CarPlay
Note
Apple CarPlay usage is limited while driving.
determined by the App provider(s). Controls will vary with each App that is available for CarPlay. For more details visit:
ARNING
Familiarize yourself with your Local and State laws regarding mobile devices.
prohibited and or illegal while driving in your
When in doubt, park the vehicle and engage the parking brake rst before performing the
1. via LIGHTING ® cable (not included).
2. The iPhone will load the CarPlay
3. On the display, the CarPlay will illuminate green, touch it to enter the CarPlay menu.
4. To return to the product Home menu, Touch
NOTE
The product’s Bluetooth will turn OFF
HandsCarPlay feature. When using CarPlay, there is no need to pair your iPhone, the USB cable connected through the rear USB port will enable this feature. If other devices are connected via Bluetooth,
CarPlay use.
15
Gestures & Control
Basic controls, but not limited to:
Touch
Swipe
Dragging
Other gestures and controls might di er on each App.
NOTE
Volume control is handled exclusively by the product.
Apple CarPlay
Using CarPlay
CarPlay Display Setup
1. Using your iPhone:
2. Touch and Hold each App icon to move. To remove an App, Touch
NOTE
Only Apps with the icon can be removed from CarPlay. Only Apps with the icon can be added in carplay.
How to Disable Apps
1. Using your iPhone: App to Disable
BOSS AUDIO BE62CP
16
Bluetooth®
Hands-Free Menu
Touch
NOTE
disconnect the iPhone to start Bluetooth.
guaranteed. Please read through the user’s guide of the mobile device.
CAUTION
For your safety, the setup process should be accomplished while the vehicle is parked and parking brake engaged.
Using your phone,media or other Bluetooth device, try to connect to this headunit.
Mobile Device: Search for BOSS AUDIO BE62CP
iOS Devices:
Android Devices: Bluetooth
A passcode is generated and will display on both the head unit and mobile device for secure pairing.
Touch
to con rm
YES
within range.
NOTE
Once paired and connected, the device list will display the available Bluetooth pro les.
iphone
Phonebook and History
To Download Phonebook: 1. Touch Contact > Download To Download History 1. Touch History > Download
Device Status
the top right of the Home menu. GATT Pro le support is required on the mobile device.
17
Bluetooth®
Hands-Free
Calling
Making & Receiving Calls
1. Dialing from the dial pad
Touch
to make call
2. Contacts
Touch the contact name
3. History
Choose the name, then
To End a call Touch
To Mute a call Touch
Dial pad
To use the dial pad while on a call Touch
Searching History
Swipe Up or Down to search
History
1. Outgoing Call
2. Incoming Call
3. Missed Call
Private Mode
When a call needs to be transferred to the mobile device:
Touch
to switch the mobile device
Touch
to return to hands-free mode
Searching Contacts
Contacts must be downloaded to search. 1. Touch
2. Enter the Contact Name, then OK
18
ON Auto Connect: ON Auto Answer: OFF Device Name: BOSS AUDIO BE62CP Clear Records
Call 1
Bluetooth®
Audio
Audio Streaming
To play media through Bluetooth, the mobile device must be Paired and Connected to the BE62CP
1. Touch
Track Control
1. Play/Pause
2. Track Fwd / Rev
3. Swipe to Fwd/Rev
Note
For best performance, your mobile device
All volume adjustments for the system should be controlled from the product.
Formats
Playback is supported from the mobile device with any format it can play. Audio will only be played by the product. Video cannot be viewed on the unit.
Switching Media
Touch
Available sources will display (Bluetooth and USB)
Note
USB source will only be displayed if a USB drive is inserted and has playable media.
Display
Track info will be displayed when available.
Album art is not supported via Bluetooth playback.
19
Media
USB/SD
USB/SD Playback
Touch
Audio Control
1. Play/Pause 2. Track Fwd / Rev 3. Repeat ALL all 4. Repeat One 1 5. Random
Video Control 1. Play/Pause
2. Track Forward/Backward
3. Repeat All
all
4. Repeat one 1
5. SETUP
Photo Control 1. Play/Pause 2. Track Forward/Backward 3. Repeat All all 4. Repeat One 1 5. Rotate
Note
If there are other les in the USB, music les will play rst.
20
Touch
To browse contents Swipe
To return to the current le playing, Touch
WARNING
Watching videos or photos while driving is against Federal ,State, and Local laws. Do not use features of this product if it cannot be operated safely and legally in your
Note
properly integrate the parking brake wire to the vehicle. Video and or photos cannot be viewed while the parking brake applied to enable viewing.
Radio
AM/ FM
Controls
Touch
Tuning
Search Touch and Hold
10:30AM
To remove a favorite, Touch
Browsing Favorites
Touch To return the Tuner screen Touch
Changing Presets
Touch
Manual Seek Touch
Auto Search & Store: Touch
Note
RBDS info (if available) and currently tuned home screen
Bands
LOC/DX
Stereo/Mono
Touch FM to switch bands
Touch
Favorites and Presets
Touch
Favorite Set
21
Auto Search & Store
Touch Stereo/Mono
Touch LOC/DX To select Local or Distant broadcasting stations, Touch
AV In/Camera/AUX IN
External Source
Playback
Touch
Media must be controlled from the external device. product.
Images may appear reversed Do not use features of this product if it cannot be operated safely and legally in your
Rear View
The rear view camera can by displayed on demand. Touch
Reverse View
When the vehicle is put into reverse gear, the camera will display the image on the screen.
CHECK SURROUNDINGS BEFORE PROCEEDING
Note
To adjust the volume level properly, the carry-in device volume should be set between 50 % – 75%. The volume level should remain at
connected to the product.
If the user opens the SETTINGS interface and turn on
you can choose REAR CAMERA and FRONT CAMERA casually.
WARNING
Never rely solely on the rear view camera; always check your surroundings before proceeding.
To return to the Home screen Touch
Rear View Delay
view trigger can be delayed to best suit the vehicle.
0 Sec Delay
Note
normally, if the product is in standby mode
22
General
System Language
Touch to change English (Default), Spanish
Note
CarPlay is independent of the system
Time Zone
(GMT-08:00) Paci Time
Date & Time
(US&Canada)
24H Mode
Touch
OFF
ON
Auto Adjust Daylight Saving
Touch
OFF
ON
Note
If using an CarPlay, the iPhone will
needs to be adjusted manually.
System Tone
Touch
OFF
ON
Power O Delay
Some vehicles during crank to start will interrupt the accessory power.
If the product re-boots during crank to start, Turn ON delay
The delay can select 1, 2 or 3 sec.
OFF
Note
Power O Delay ON will also delay when the vehicle is turned OFF.
This might a ect handsduring a call.
Touch
CAUTION
23
Se g
Audio
EQ
To access the EQ menu Touch
Note
The EQ can also be directly accessed while changing the volume. The volume display will show the EQ icon, you can touch to access the
Preset EQ
Jazz, HipHop, Pop,Rock, R&B
Balance/Fader Touch
Swipe for quick adjustment
Front/Rear Fader, Touch
Swipe for quick adjustment
Subwoofer
The level and lter can be adjusted for the Sub pre-amp output. Level, 1-14 dB Swipe Filter: 50Hz, 80 Hz, 120 Hz, 160 Hz
Touch +/- Subwoofer Frequency
Loudness
Enhances and gently boosts low and high freq.
Touch
OFF
ON
Internal Amp
To reduce the possibility of noise entering the -amp
outputs, the internal amp can be turned OFF
Touch
ON
OFF
Volume
Settings are for default volumes for Main(Radio, Media), Hands-free(BT Ring, BT Talking), Apple CarPlay/Android Auto (Navi, Voice).
Source Level
The source mode(Radio, USB, SD, BT Audio, AV Input, Apple carplay,AUX) gain control.
24
Display
Touch
OFF
ON
When the vehicle lights are on, the products
Gamm
Swipe
Gamma can be adjusted for both day and
Scree Bri ht ess
Swipe
Wall paper Touch to change User can change the background picture by
Back r Swipe
Bri ht ess
Touch
ON
OFF
Power On/O Bluetooth
ON
Note
Bluetooth will turn OFF CarPlay is in use. If other devices are connected via Bluetooth, they will be
Bluetooth
Auto Co ect
Touch
ON
OFF
Auto connects to the device when the product is powered ON
ON
Auto A swer
Touch
OFF
ON
Auto answers when there is an incoming call.
OFF
25
Bluetooth
Device Name
BOSS AUDIO BE62CP
Rear Camera input
Turn on if you have a rear view camera, turn
Front Camera Input
if you have not.
Parking Assist guide
assist guide, turn on if you have not.
Parking Assist guide Adjust
You can adjust parking assist guide
Camera
Rear View Delay
0 Sec (Default), 0.1 Sec, 0.5 Sec, 1 Sec, 2 Sec When switching from Park to Drive, or vice versa, the camera should not trigger on the display.
on reverse gear selector.
Region
Touch
USA 2 US Tuner Spacing: FM (200 KHz), AM (10 KHz) European Spacing: FM (50 KHz), AM (9 KHz)
RBDS, Radio Broadcast Data System
Touch
ON
displayed on the product.
RBDS, Cont’d
display.
Radio
Touch
OFF
ON
When On
and select the strongest signal of those being broadcast.
OFF
TA (Tra c Announcement)
Touch
OFF
ON
broadcasts playing media. OFF
26
Power/SWC
UTION
It is recommended to have the product professional.
UTION
prevent damage to the product, and/or possible injury.
CAUTION
If several ampli ers are to be used, it is recommended to use a relay for the Remote Out trigger.
Note
Unused input/output wires need be insulated with tape, heat shrink, or crimp connectors. Never use wire nuts.
Red/Wht ,Rear Camera Power (+12V, 500 mA) Red/Violet,Front Camera Power (+12V, 500 mA)
SWC Input Orange Red, Accessory (+12V) Black, Ground (-)
Yellow, Constant (+12V)
Violet/Wht, Reverse Signal Input (+12V)
Blue, Antenna Output (+12V, 500 mA Max)
Blue/Wht , Rem. Output(+12v, 500 mA)
Note
A separate interface might be needed for your
consult with a professional installer.
te
When replacing the fuse, always do so with the same type and value (15 A).
27
S akers
UTION
Do not chassis ground any speaker wire leads.
UTION
Only use 4-8 Speakers Do not use 1-3 Speakers
UTION
Do not bridge any of the channels, they are only to be wired in stereo mode.
Note
Rear Right (Ch. 4) Purple (+) Purple/Black (-)
Unused speaker wires need be insulated with tape, heat shrink, or crimp connectors. Never use wire nuts.
If the speaker outputs are not used, turn O the internal amp to reduce the possibility of noise entering the signal chain.
Front Right (Ch. 2) Gray (+) Gray/Black (-)
Note
Observe speaker polarity when making
Green (+) Green/Black (-)
White (+) White/Black (-)
28
Audio Pre-amp/AV IN/ Radio
Note
Subwoofer Pre-amp is a non-fading mono output.
Note
Always run signal wires away from power cables to reduce the possibility of noise.
FL
FR
L-IN
RL
RR
R-IN
SUB1 SUB2
V-IN
RADIO
SUB Pre-Amp Output A/V Input
AM/FM Antenna
Note
If pre-amp outputs are being used exclusively, turn O the internal amp of the product, to reduce the possibility of noise entering the signal chain.
29
Camera/USB/MIC
ARNING
Never rely solely on the rear view camera; always check your surroundings before proceeding. Images may appear reversed Do not use a feature of this product if it cannot be operated safely and legally in your
USB
30
Parking Brake
ARNING
feature) violates Federal, State, and Local laws. This may lead to injury, property damage, and/or death.
ARNING
Watching videos or photos while driving is against Federal , State, and Local laws.
Note
For Andoird Auto setup, the parking brake status wire MUST be connected.
Note
properly integrate the parking brake wire to the vehicle. Video and or photos cannot be viewed while the parking brake applied to enable viewing.
Lt. Green, Parking Brake Input
31
Power/Speaker/SWC Harness
Note
The parking brake input needs to be connected to the power side of the parking brake.
Note
Every vehicle has a di erent type of parking
professional installer.
Hands-free Mic
Placement
Every vehicle will perform di erently due to layout, interior materials, etc…
The Red shaded areas are the recommended
Items to look for before placement: 1. Do not place in front of air vents. 2. If the vehicle has tweeters placed
on sail panels, do NOT locate the mic on steering column area. 3. Front of mic must not be blocked. 4.
5. Do not cover the grille openings surrounding the mic.
6. To avoid excessive wind noise, do not place near the sunroof opening WARNING
Run microphone wire where it will NOT
i.e. Airbags, Knee Airbags, etc…
32
Issues
No Sound Media Not Supported
Apple CarPlay
Bluetooth
Cause
Internal ampli er is o Product is muted External ampli ers Audio source Media on the USB device/SD card Radio area Antenna
Bad Lightning®/USB cable Locked device Not charged CarPlay
33
ON Touch the volume. Check the external ampli ers are on. Check the remote output wire has voltage Change the audio source
Change the media format on the USB device/SD card Change the USB device/SD card
Turn OFF AF and TA Turn OFF RBDS Antenna output wire sn’t cionnected Connect Antenna to product
Replace the cable Device needs to be unlocked Device needs to be powered ON for CarPlay/
and power on. Unplug the device, close all Apps and plug it in again.
Make sure the device is within range.
turned ON
Issues
Bluetooth Hands-free call quality
Unit is unresponsive
Cause
Mobile device Microphone
Processor has frozen
Go to Se g >Connec Power ON Pair and Connect the device like new.
Check cellular strength on mobile device. End call and redial number. Microphone placement needs to be relocated.
Check to see if microphone is properly plugged in.
Restore the factory sengs. Use a small pin to press the reset buon on the front panel.
Customer Service 805-751-4853
M-F 8:30a-5:00p (PST) Tech Support: www.bossaudio.com/support/technical-support
© 2021 Boss Audio Systems
34
General
Power Input……………………………8.5 V–18 V DC Nominal…………………………14.4 V DC …………15A
Fuse Type………………………………………………..15A Dimensions (H x W x D)………..3.8″x6.71″x3.56″ Head Unit Weight…………………………….. 1.75 lbs.
-4–158°F
Display
Screen Size……………………………………………. 6.2″
Screen Type………………….TFT-
Audio
800*480
Max Power………………………………….80 W x 4 Ch.
Acceptable Speaker Load……………………….4-
Preset EQ……………………………………………………..5 JAZZ, HIPHOP, POP, ROCK, R&B
EQ Bands, Adjustable………………………………….10
32, 63, 125, 250Hz, 500Hz
1KHz, 2KHz, 4KHz, 8KHz, 16KHz
EQ Boost/Cut………………………………………..± 6 dB
Audio Cont’d
Pre-amp Output…………………………………..3 Pairs Front………………………4V, Full-Range Rear………………………..4V, Full-Range Sub (Mono)……………………….4V, LPF
Sub LPF…………….50 Hz, 80 Hz, 120 Hz, 160 Hz Sub Level…………………………………………..+1-14dB
Radio Tuner
Freq. Range……………..87.5 MHz-108 MHz (FM) Freq. Range……………….522 kHz-1710 kHz (AM) USA 1 Range (FM)………………..100 kHz Spacing USA 2 Range (FM)………………..200 kHz Spacing Europe Range (FM)…………………50 kHz Spacing RBDS…………………………………………………….AF, TA
Apple CarPlay
iPhone Support…………………iPhone 5 or Newer iOS……………………………………….iOS 7.1 or Newer
35
USB/SD
USB Spec……………………….USB 2.0 (High-Speed) Rear USB portCarplay& 1.5A Charging …….. Current Output 1.5A Front USB Port Media & 1.5A Charging……… Current Output 1.5A File System……………………………………………FAT32 Audio Playback…………………………….WAV, MP3 Video Playback………………….AVI, MKV, WMV Picture Playback……………………JPG, PNG, BMP
*Not all listed compressed les guaranteed to
contents.
Bluetooth®
Version…………………………………………v4.2+E.D.R. Audio Codec………………………………………….S.B.C. Pro les………………………………………………………….. HFP v1.6,A2DP v1.2,AVRCP v1.5,PBAP v1.1
User’s Notes
36 0221
Introduction
This camera is designed for use as a front view or rear-facing backup camera, and mounted neatly behind your license plate. When installed with any of our camera-capable head units, the camera view can be automatically triggered when shifting into reverse or manually triggered by selecting the camera button from the head unit home screen.
Package Contents
· 1x Camera with power and video sockets · 1x Power cable with power plug · 1x Video cable with two yellow RCA plugs · User manual
Important
Please read and understand all instructions before you use your product. Failure to follow the instructions could result in injury and/or damage that could potentially void the warranty.
Important safety precautions · Use of the camera must not replace other safe driving habits. Precise
control and looking around before backing up is necessary. · Always remember that the area displayed by the camera is limited, and
certain obstacles may not be detected or not reliably detected.
Installation precautions · WARNING: Always consult a professional installer. · Improper wiring and mounting of the camera can cause damage, injury
or accident. Have installation performed by a professional only. Contact our technical support for any installation questions. · Disconnect the negative terminal of the vehicle battery prior to wiring. · When making modifications to your car due to the installation, make sure the safety and structural integrity of the car is not impaired. · Hide wires under car floor mat or through car headliner. Make sure wires are not squeezed or damaged by sharp edges. Use rubber bushings for penetrations.
1
Wiring
· Follow two steps described below to install this product as a front camera or a rear camera.
· The rear camera view automatically turns on when reversing. Ensure you connect the “Reverse Input” wire on your head unit to the vehicle’s reverse light for reverse trigger. Front camera view is not accessible when reversing.
· Both rear and front camera view can be selected via Home screen options on your head unit.
1. Connect the video cables. a Connect one yellow RCA plug of
the video cable to your head unit. Front camera: to “Front Camera Input” RCA socket. Rear camera: to “Rear Camera Input” RCA socket. b Connect the other yellow RCA plug of the video cable to the yellow RCA socket on the camera.
a
Front or rear cam
power wire
c
2. Connect the power cables.
c Connect the red split wire of the
video cable to your head unit.
d2
Front camera: to “Front Camera Power Output” wire. Rear camera: to “Rear Camera
(+) (-)
b
e
Power Output” wire.
f
d Connect the other red split wire of
the video cable to the red wire of
the power cable.
e Connect the black (ground) wire of the power cable to the car chassis.
Camera
f Connect the black plug of the power cable to the red socket on the
camera.
2
Mounting
The camera is designed for mounting behind the license plate of your car through the screw holes on the license plate. No drilling hole is required.
1. Remove the license plate lamp. Through the opening of the license plate lamp, run the camera’s cable from the outside into the inside of the car.
2. Remove the license plate screws. Align the camera frame with two top screw holes on the license plate, and secure the camera frame with two license plate screws. Make sure the camera is correctly oriented to avoid reverse image.
Camera frame
License plate frame
3. Verify the camera angle is properly positioned. If needed, loosen the screws and adjust the camera angle then re-tighten the screws.
Troubleshooting
Problem
Solution
No image
Ensure the camera’s power cable is securely plugged.
Ensure there is correct and secure wiring between the camera and your head unit.
Ensure the reverse input wire on your head unit is connected to the vehicle’s reverse light.
Ensure correct camera settings on your head unit.
Image blurry Check for water drops or dust on the camera lens. Clean it with a damp, fiber-free cloth.
Image shaking Ensure the camera is tightly mounted.
Image slanted Adjust the camera frame position.
3
Image Setting
· To remove the on-screen parking guidelines, cut open the white wire loop which splits from the camera’s cable. Otherwise, keep the white wire loop uncut.
· If the camera image appears reverse, cut open the blue wire loop which splits from the camera’s cable. Otherwise, keep the blue wire loop uncut.
· Make sure to unplug the power cable from the camera and plug it again to enable the new setting (after cutting off the white or blue wire loop).
Specifications Power supply……………………………..12 VDC Viewing angle ……………………………. 170° TV system…………………………………. NTSC Video output ……………………………… 1.0 vp-p, 75 S/N ratio……………………………………. 45 dB Ingress protection rating ……………… IP67 (waterproof) Operating conditions…………………… -22 to +140°F (-30 to +60°C)
max. 95% RH White balance…………………………….Auto Illumination ……………………………….. min. 0.1 lux Automatic gain control (AGC)……….Auto Resolution (TV lines) ………………….. 480 Electronic shutter speed ……………… 1/60 (NTSC) Effective pixels……………………………648 x 488 Dimensions (L x W x H) ………………. 7.756″ x 0.88″ x 0.88″
197 x 22 x 22 mm Cable length ……………………………… 197″/5m (video cable); 39″/1m (power
cable); 20″/0.5m (camera’s cable)
Specifications are subject to change without notice.
4
0523
Boss ELPC40B camera connected to the Boss BE920WCPA-C radio
Connect the Purple/White reverse wire on the BE920WCPA-C harness to the ~
/ vehicles reverse wire to switch the radio to the cameras picture automatically. ~
.,.
/ ,.·’
·.
0
r/ ~
//
Line up the Arrows and Grooves on the connectors when connecting the Video cable to the Camera cable.
· ·
,,~ -‘1;.,,.
…
~>
Connect the ELPC40B video cables Red wire to the Red/White “Rear Cam Power Out” from the BE920WCPA-C radio harness.
Documents / Resources
 | BOSS BE62CP-C Digital Multimedia Receiver [pdf] User Manual BE62CP-C, 104BE62CPC, 104BE62CPC, BE62CP-C Digital Multimedia Receiver, BE62CP-C, Digital Multimedia Receiver, Multimedia Receiver, Receiver |