Model ACD2X2
Amplified Drop-In
Ceiling Speaker
Electrical Connection
- Remove cover, install cable clamp (if desired), and feed the interconnecting cable into the electrical box.
- Make audio connections to the ‘T’ and “R” leads and the 24V DC connections to the”+” and “-” leads.
Note: The speaker will also work properly if the”+” and”-” connections are reversed. - Secure all mechanical connections and re-install the cover.
- Adjust volume control using recessed screwdriver adjustable volume control located on the ceiling grille. Ceiling Installation 2ft. x 2ft. Tile Space Drop ceiling speaker into space (crossbar not necessary). 2ft. x 4ft. Tile Space Cut ceiling tile to 23- 3/4″. Place the speaker in the ceiling with the tile support rail crossbar facing the ceiling tile opening. Drop in the tile.
Ceiling Installation
2ft. x 2ft. Tile Space
Drop ceiling speaker into space (crossbar not necessary).
2ft. x 4ft. Tile Space
Cut ceiling tile to 23- 3/4″. Place the speaker in the ceiling with the tile support rail crossbar facing the ceiling tile opening. Drop in the tile.
— 2-YEAR WARRANTY —
The ACD2X2 is warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the original purchaser. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation, or have been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
| ACD2X2 Connections | Power Supply Connections | |
| BLACK Lead to | 24V DC(+) |  |
| WHITE Lead to | 24V DC(-) | |
| BLUE Lead to | Audio Input (T) | |
| RED Lead to | Audio Input (R) | |
Specifications subject to change without notice
www.bogen.com
© 2005-2014 Bogen Communications, Inc.
54-2131-01G 1411
MADE IN XXXXX
Documents / Resources
 | BOGEN ACD2X2 Amplified Drop-In Ceiling Speaker [pdf] Instruction Manual ACD2X2, Amplified Drop-In Ceiling Speaker |
