Blukar K9112 Super Bright LED Headlamp With Sensor Control
Physical Diagram
- Sensor Button
- Switch Button
- Charging Port
- Headband
- Angle Adjustment Plate
- Headlamp
Welcome
Thank you for purchasing this Blukar product. To ensure optimum performance and safety, please read this user manual carefully and keep it for ture reference. If you need any additional assistance, please contact our customer service support team or send us an email to support@blukar.com.
Packing List
- 1 x Headlamp
- 1 x Headband
- 1 x USB Cable
- 1 x User Manual
Specifications
On/Off Mode
- Press the switch button 1 time to turn on the light (Strong Light).
- Press the switch button 2 times to switch the light (Low Light).
- Press the switch button 3 times to switch the light (Red Light).
- Press the switch button 4 times to switch the light (Red Strobe Light).
- Press the switch button 5 times to turn off the light.
Sensor Mode
- Press the sensor button 1 time to enter the sensor mode (Strong Light).
- Press the sensor button 2 times to switch the light (Sensor Mode, Red Light).
- Press the sensor button 3 times to turn off the sensor mode and turn off the light.
Note
- In any operating mode, if you select a brightness mode and no operation for more than 5 seconds, the light will directly switch off when you press the button again.
- In the induction mode, the blue light will light up on the button.
- Waving your hand within 15cm in front of the headlamp to turn on/off the light in sensor mode.
Charging
- Charging: Red Light; Fully Charged: Green Light.
- Please make sure the product is fully charged when you use it for the first time.
- Please use the supplied or certified USB cable to charge. When fully charged, please close the dust cover to protect the charging port.
Warning
- Avoid drops, impact, and extrusion.
- The highlight mode is very bright; in this mode, it is normal for the headlamp to heat up.
- The perceived temperature depends on personal perception and the ambient temperature. The maximum temperature is within the standard limits. The headlamp is safe to use.
- Do not disassemble and replace the internal parts of the lamp by yourself, so as to not to damage the product or even cause safety hazards.
- The light source of this luminaire is not replaceable, and the whole luminaire should be replaced when the light source has reached the end of its life.
- It is not recommended to leave the product in an uncharged state. If not used for a long period, charge the headlamp at least once every 3 months.
- Please use a safety-certified adapter when charging, and never overload the circuit, as this may cause an electric shock or fire. Cut off the power in time after fully charging.
- Do not use this product in extremely hot or cold environments (<-25°C / >40°C).
- Keep it away from fire, flammable gases, and corrosive liquids
- Children should use this product under the supervision and guidance of adults.
- Do not look directly into the light source to avoid eye irritation.
- To prolong the service life of the battery, please do not overcharge or overdischarge.
- This product does not have a diving function. Do not take this product diving or put it in a bathtub or water basin for a long time.
- A headband is a choking hazard. Do not wrap around the neck.
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks, e.g., an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
TEL: 1-800-360-5881
EMAIL: support@blukar.com
WEBSITE: www.blukar.com
Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. All rights reserved.
Blukar LED Headlamp
Model No.: K9112
SUCCESS COURIER SL
CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA
OFICINA 3, Fuenlabrada, Madrid, 2894/ Spain
successservicez@hotmail.com
GOAL REACH CONSULTING LTD
OFFICE 1029 3 HARDMAN STREET 10TH FLOOR, SPINNINGFIELDS MANCHESTER, UK M3 3HF
goalservice@hotmail.com
Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
Manufacturer Address: 1701, 17th Floor, Block B, Building 1, Ganfeng
Technology Buildings, No. 993 Jiaxian Road, Xiangjiaotang Community
Bantian Street, Longgang District, Shenzhen, Guangdong, China
Manufacturer Email: support@blukar.com
Made in China | In China Hergestelt I Fabriqué en Chine
Fabricada en China | Prodotto in Cina | Gemaakt in China
Wyprodukowane Chinach | Tillverkad i Kina | Cin’de yapilmis 1 7E54
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause an undesired operation.
Documents / Resources
 | Blukar K9112 Super Bright LED Headlamp With Sensor Control [pdf] User Guide K9112, K9112 Super Bright LED Headlamp With Sensor Control, K9112, Super Bright LED Headlamp With Sensor Control, LED Headlamp With Sensor Control, Sensor Control, Control |