MS-K5 MS-K10 Stereo Bluetooth Headphone User Manual

PAIRING:

  1. Press the Multi-function(on/off) button for 5-7 seconds, the red and blue light will begin to flash and “Bluetooth mode” or ” The bluetooth device is ready to pair ” will be heard to indicate the headphones are in pairing mode.
  2. For model MS-K5,Search for pairing name ” MS-BT ” in your devive’s pairing screen and select to connect it. For model MS-K10,Search for pairing name ” BT ” in your devive’s pairing screen and select to connect it.If asked for a pairing code or password enter 0000(four zeroes). If not in pairing mode for some reason,turn the device off and on again while making sure no other devices are paired to the headphone until you can see the headphone for pairing in your device.
  3. Once the two are paired successfully you will hear “The bluetooth device is connected succussfully and the Bluetooth LED will now stay on to confirm pairing.
  4. The Bluetooth headphones will re-connect automatically if your device has been paired once before.

ON/OFF

On:Long Press multi-function (On/off)button for 5-7 seconds (Power On)Off: Long Press multi-function (On/off)button for 3 seconds (Power Off)If the battery voltage is too low, the red light will flash and the headphone will shut down

PLAY/PAUSE
Press multi-function (on/off) button for play/ pause function

VOLUME UP/DOWN
Long Press “ + ” button for Volume up Long Press “ – ” button for Volume down

PREVIOUS /NEXT TRACK
Short Press the “ + ” button for Next track Short Press the “ – ” button for Previous track

ANSWERING A CALL
Press the multi-function (on/off) button once to answer an incoming call

ENDING A CALLP
ress the multi-function (on/off) button once to end a call

REJECTING A CALL
Press and hold the multi-function (on/off) button to reject a call

FM RADIO FUNCTION

1.If you are on Bluetooth mode1)For model MS-K5,Pls short Press ” FM ” button change to FM Radio mode.2)For model MS-K10,Pls short Press ” M ” button change to FM Radio mode.

2.Search for stations:

 After making sure the headphone is under FM radio mode, 1)For model MS-K5, Long press ” FM ” button until you hear there has a station, after you hear there has a station .Pls short press muti-function (on/off)button to listen.2)For model MS-K10, Long press ” M ” button until you hear there has a station, after you hear there has a station .Pls short press muti-function (on/off)button to listen.3.Then you could use volume up/volume down button to switch different stations.

PLAYING MUSIC FROM A TF/MICRO SD CARD

Press the multi-function button for 5-7 seconds to turn on the Headphones, insert the TF/Micro SD card, this will then play from stored music on the card.

3.5MM AUDIO CABLE

The 3.5mm audio cable can be used when the headphone is out of battery.

 

Read More About This Manual & Download PDF:

 

Bluestar Stereo Bluetooth Headphone MS-K5 & MS-K10 User Manual – Optimized PDF
Bluestar Stereo Bluetooth Headphone MS-K5 & MS-K10 User Manual – Original PDF

Leave a comment

Your email address will not be published.