Model: Bluedio TN2
ENERGY 2ND GENERATION
Power On: When the headset is off, press and hold the MF button until you hear “Power on”.
Power Off: When the headset is on, press and hold the MF button until you hear “Power off”.
Pairing mode: When the headset is off, press and hold the MF button until you hear “Ready to pair”.
Bluetooth pairing: Make the headset enter pairing mode (see Instruction “Pairing mode”), and b.Jm on the Bluetooth feature of your phone, select “T energy 2”.
When playing music, press the MF button once to pause; press once age in lo resume.
Press the Volume- once to reduce the volume; press and hold to skip to the previous !rack.
Press Iha Volume+ onca to increBSB the volume; press and hold to skip ID the neld track.
Answer/Reject a call: Press the MF button Dnce tD Answer; press Dnce again ID End; press and hDld for 2 seconds tD refuse.
ANC switch: Push the ANG switch lo tum on/off the ANG function; when ifs on, the LED remains red.
Language 11elaction: Tum Dn Iha headset first, than press Iha MF button and the Volume- button once simultaneously to select Chinese/English/French/ Spanish.
Charge the headset: Tum off the headset before charging and use the included charging cable. While charging, the red light stays on. Allow 1.5 hours for a full charge Once fully charged, the blue Ilg ht wlll stay on
Bluelooth version: V4.2
Bluetooth operating range: up to 1 Om (free space)
Transmission frequency range: 2.4GHz-2.48GHz
Supported profiles: A2DP, AVRCP, HSP, HFP
Driver units: 13mm
Nominal impedance: 32
Frequency response: 20Hz-20KHz
Sound pressure level(SPL): 116dB
Standby time: up to 250 hours
Bluetooth music/call time: upto 12hours
Pure ANC time: about 9 hours
Fully charged time: about 1.5 hours
Operating environment: -10to50″C
Charging voltage/current: 5V/>500mA
Output power: 1omw+1omw
To verify the headset
Scrape the anti-fake label on the package for verification code; Visit our website: www.bluedio.com; Enter the verification code lo verify the headset.
Learn more and get support
Welcome to visit our website: www.bluedlo.com;
Or to email us et [email protected];
Or to call us at 400-889-0123.
Questions about your Manual ? Post in the comments!